LRC LGSOT12CLT1G Dual transient voltage suppressors array for esd protection Datasheet

LESHAN RADIO COMPANY, LTD.
Dual Transient Voltage Suppressors Array for ESD Protection
General Description
The LGSOT12CLT1G is a dual monolithic voltage
suppressor designed to protect components which
are connected to data and transmission lines against
ESD. It clamps the voltage just above the logic level
supply for positive transients, and to a diode drop
below ground for negative transients. It can also
work as bidirectional suppressor by connecting only
pin1 and 2.
LGSOT12CLT1G
3
1
2
SOT– 23
Applications
z
z
z
Computers
Printers
Communication systems
Features
z
2 Unidirectional Transil functions
z
z
z
Low leakage current: IR max< 20 μA at VRM
300W peak pulse power(8/20μs)
Transient protection for data lines as per
IEC61000-4-2(ESD) 15KV(air) 8KV(contact)
IEC61000-4-5(Lightning) see IPPM below
ORDERING INFORMATION
Device
LGSOT12CLT1G
Package
SOT–23
Shipping
3000/Tape & Reel
Absolute Ratings (Tamb=25°C )
Symbol
Parameter
Value
Units
PPP
Peak Pulse Power (tp = 8/20μs)
300
W
TL
Maximum lead temperature for soldering during 10s
260
°C
Tstg
Storage Temperature Range
-55 to +15
°C
Top
Operating Temperature Range
-40 to +125
°C
Tj
Maximum junction temperature
150
°C
IEC61000-4-2 air discharge
15
kv
IEC61000-4-2 contact discharge
8
Electrostatic discharge
VPP
1/7
LESHAN RADIO COMPANY, LTD.
LGSOT12CLT1G
Electrical Parameter
Symbol
Parameter
VRM
Stand-off voltage
VBR
Breakdown voltage
VCL
Clamping voltage
IRM
Leakage current
IPPM
Peak pulse current
Electrical Characteristics
Maximum
Minimum
Maximum
Maximum
Leakage
Breakdown
Clamping
Pulse Peak
Current
Voltage
Voltage
Current
@ VRM
1mA
VRM
IRM
VBR
V
µA
V
V
LGSOT04CLT1G
4.0
20.0
5.0
LGSOT05CLT1G
5.0
20.0
LGSOT08CLT1G
8.0
LGSOT12CLT1G
LGSOT15CLT1G
Rated
Stand-off
Part Numbers
Maximum
Capacitance
Voltage
1A
1)
5A
1)
tp=8/20us
0v, 1MHz
IPPM
C
V
A
pF
8.5
10.5
17
300
6.0
9.8
12.5
17
220
5.0
8.5
13.4
15.0
15
190
12.0
1.0
13.3
19.0
28.0
12
90
15.0
1.0
16.7
24
39.0
10
60
VCL
1).8/20 waveform used. (see fig2.)
Typical Characteristics
Fig1. Peak Pulse Power
VS Pulse Time
2/7
LESHAN RADIO COMPANY, LTD.
LGSOT12CLT1G
Fig2. Pulse Waveform
Fig3.Power Derating
3/7
LESHAN RADIO COMPANY, LTD.
LGSOT12CLT1G
Application Note
Electrostatic discharge (ESD) is a major cause of failure in electronic systems. Transient Voltage
Suppressors (TVS) are an ideal choice for ESD protection. They are capable of clamping the incoming transient
to a low enough level such that damage to the protected semiconductor is prevented.
Surface mount TVS arrays offer the best choice for minimal lead inductance. They serve as parallel
protection elements, connected between the signal line to ground. As the transient rises above the operating
voltage of the device, the TVS array becomes a low impedance path diverting the transient current to ground.
The LGSOT12CLT1G array is the ideal board evel protection of ESD sensitive semiconductor components.
The tiny SOT23 package allows design flexibility in the design of high density boards where the space
saving is at a premium. This enables to shorten the routing and contributes to hardening againt ESD.
4/7
LESHAN RADIO COMPANY, LTD.
LGSOT12CLT1G
SOT-23
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M,1982
2. CONTROLLING DIMENSION: INCH.
A
L
3
1
V
2
DIM
B S
G
C
D
H
K
J
MIN
0.1102
0.0472
0.0350
0.0150
0.0701
0.0005
0.0034
0.0140
0.0350
0.0830
0.0177
A
B
C
D
G
H
J
K
L
S
V
INCHES
MAX
0.1197
0.0551
0.0440
0.0200
0.0807
0.0040
0.0070
0.0285
0.0401
0.1039
0.0236
MILLIMETERS
MIN
MAX
2.80
3.04
1.20
1.40
0.89
1.11
0.37
0.50
1.78
2.04
0.013
0.100
0.085
0.177
0.35
0.69
0.89
1.02
2.10
2.64
0.45
0.60
0.037
0.95
0.037
0.95
0.079
2.0
0.035
0.9
0.031
0.8
inches
mm
5/7
LESHAN RADIO COMPANY, LTD.
EMBOSSED TAPE AND REEL DATA
FOR DISCRETES
T Max
Outside Dimension
Measured at Edge
13.0mm ± 0.5mm
1.5mm Min
(.512 ±.002’’)
(.06’’)
A
50mm Min
(1.969’’)
20.2mm Min
(.795’’)
Full Radius
G
Inside Dimension
Measured Near Hub
Size
A Max
G
8 mm
330mm
(12.992’’)
8.4mm+1.5mm, -0.0
(.33’’+.059’’, -0.00)
T Max
14.4mm
(.56’’)
Reel Dimensions
Metric Dimensions Govern –– English are in parentheses for reference only
Storage Conditions
Temperature: 5 to 40 Deg.C (20 to 30 Deg. C is preferred)
Humidity: 30 to 80 RH (40 to 60 is preferred )
Recommended Period: One year after manufacturing
(This recommended period is for the soldering condition only. The
characteristics and reliabilities of the products are not restricted to
this limitation)
6/7
LESHAN RADIO COMPANY, LTD.
Shipment Specification
CPN
LABEL
LABEL
LABEL
Dim(Unit:mm)
195mm*195mm*150mm
10 Reel
10Reel/Inner Box
30KPCS/Inner Box
3000PCS/Reel
80KPCS/Inner Box (SOT-723,SOD-723,SOD-923)
8000PCS/Reel (SOT-723,SOD-723,SOD-923)
Dim(Unit:mm)
LABEL
460mm*400mm*420mm
MARK
乐山无线电股份有限公司
Leshan Radio Company,Ltd.
12 Inner Box/Carton
360KPCS/Carton
960KPCS/Carton (SOT-723,SOD-723,SOD-923)
7/7
Similar pages