LH1511BAB/ BABTR/ BT VISHAY Vishay Semiconductors 1 Form B Solid State Relay DIP SMD Features • • • • • • • Isolation Test Voltage 3750 VRMS Typical RON 10 Ω Load Voltage 200 V Linear, AC/DC Operation Clean Bounce Free Switching Low Power Consumption SMD Lead Available on Tape and Reel S DC 6 5 S' S' 1 Agency Approvals S' 4 2 3 i179031 • UL - File No. E52744 structed as a multi-chip hybrid device. Actuation control is via an Infrared LED. The output switch is a combination of a photodiode array with MOSFET switches and control circuity. The relays can be configured for AC/DC or DC only operation. • CSA - Certification 093751 • BSI Applications General Telecom Switching Security Equipment Instrumentation Industrial Controls Order Information Part LH1511BAB Remarks Gullwing, Tubes, SMD-6 Description LH1511BABTR Gullwing, Tape and Reel, SMD-6 The LH1511 relays are SPST normally closed switches (1 Form B) that can replace electromechanical relays in many applications. The relays are con- LH1511BT Tubes, DIP-6 Absolute Maximum Ratings, Tamb = 25 °C Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute Maximum Ratings for extended periods of time can adversely affect reliability. SSR Parameter Test condition LED continuous forward current Symbol Value Unit IF 50 mA LED reverse voltage IR ≤ 10 µA VR 8.0 V DC or peak AC load voltage IL ≤ 50 µA VL 200 V Continuous DC load current bidirectional operation IL 200 mA Continuous DC load current unidirectional operation IL 300 mA mA Peak load current (single shot) IP 400 Ambient temperature range Tamb - 40 to + 85 °C Storage temperature range Tstg - 40 to + 125 °C Document Number 83811 Rev. 1.2, 15-Mar-04 t = 100 ms www.vishay.com 1 LH1511BAB/ BABTR/ BT VISHAY Vishay Semiconductors Symbol Value Pin soldering temperature Parameter t = 10 s max Test condition Tsld 260 °C Input/output isolation voltage VRMS t = 1.0 s, IISO = 10 µA max VISO 3750 VRMS Pdiss 550 mW Output power dissipation (continuous) Unit Electrical Characteristics, Tamb = 25 °C Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. Input Symbol Min Typ. LED forward current, switch turn-on Parameter IL = ± 200 mA, t = 10 ms Test condition IFon 0.2 0.9 LED forward current, switch turn-off VL = ± 150 V IFoff LED forward voltage IF = 10 mA VF Symbol Max Unit mA 1.0 2.0 mA 1.15 1.26 1.45 V Min Output Typ. Max Unit ON-resistance ac/dc : Pin 4, 6 (+) to 5 (-) Parameter IF = 0 mA, IL = 50 mA Test condition RON 10 15 Ω ON-resistance dc: Pin 4, 6 (+) to 5 (-) IF = 0 mA, IL = 100 mA RON 2.5 3.75 Ω Off-resistance IF = 5.0 mA, VL = ± 100 V ROFF Off-state leakage current IF = 5.0 mA, VL = ± 200 V Output capacitance IF = 5.0 mA, VL = 50 V 0.1 1.4 0.07 GΩ 1.0 50 nA pf Transfer Parameter Test condition Capacitance (input-output) Symbol Min Typ. Max Unit VISO = 1.0 V CIO 3.0 Turn-on time IF = 10 mA, IL = 50 mA ton 1.2 3.0 ms Turn-off time IF = 10 mA, IL = 50 mA toff 1.0 3.0 ms pF Typical Characteristics (Tamb = 25 °C unless otherwise specified) Fig. 1 Recommended Operating Conditions LOAD CURRENT (mA) 150 5.0 mA 120 90 60 30 0 -40 -20 0 20 40 60 80 AMBIENT TEMPERATURE (°C) ilh1511bt_00 www.vishay.com 2 Document Number 83811 Rev. 1.2, 15-Mar-04 LH1511BAB/ BABTR/ BT VISHAY Vishay Semiconductors Package Dimensions in Inches (mm) DIP .330 (8.38) .100 (2.54) .250 (6.35) .360 (9.14) ISO Method A .018 (.46) 6-.031 (6-.80) Dia. .100 (2.54) .300 (7.62) .130 (3.30) .250 (6.35) .360 (9.14) .285 (7.24)Typ. .360 (9.14) .200 (5.08) i178015 Package Dimensions in Inches (mm) SMD .330 (8.38) .100 (2.54) .100 (2.54) .250 (6.35) .327 (8.31) .375 (9.53) .075 (1.90) .018 (.46) .059 (1.50) .300 (7.62) .175 (4.45) ISO Method A i178016 Document Number 83811 Rev. 1.2, 15-Mar-04 .130 (3.30) .025 (.64)Typ. .010 (.25)Typ. www.vishay.com 3 LH1511BAB/ BABTR/ BT VISHAY Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423 www.vishay.com 4 Document Number 83811 Rev. 1.2, 15-Mar-04