LH1532AB/AAC/AACTR Dual 1 Form A Solid State Relay FEATURES • Dual Channel (LH1540) • Current Limit Protection • l/O Isolation, 5300 VRMS • Typical RON 20 Ω • Load Voltage 350 V • Load Current 120 mA • High Surge Capability • Linear, AC/DC Operation • Clean Bounce Free Switching • Low Power Consumption • SMD Lead Available on Tape and Reel AGENCY APPROVALS • • • • • UL – File No. E52744 CSA – Certification 093751 BSI/BABT Cert. No. 7980 VDE 0884 Approval FIMKO Approval Package Dimensions in Inches (mm) DIP pin one ID 4 The LH1532 dual 1 Form A relays are SPST normally open switches that can replace electromechanical relays in many applications. They are constructed using a GaAIAs LED for actuation control and an integrated monolithic die for the switch output. The die, fabricated in a high-voltage dielectrically isolated technology is comprised of a photodiode array, switch control circuitry, and MOSFET switches. In addition, the LH1532 SSRs employ current-limiting circuitry, enabling them to pass FCC 68.302 and other regulatory surge requirements when overvoltage protection is provided. Document Number: 83829 Revision 17-August-01 S1 1 2 S1' S2 8 5 6 7 .045 (1.14) .030 (0.76) 7 S2' 6 5 8 .390 (9.91) .379 (9.63) 1 2 3 S1 S1' S2 S2' 4 .300 (7.62) typ. .031 (0.79) 4° typ. .150 (3.81) .130 (3.30) .050 (1.27) .022 (.56) .018 (.46) 10° .035 (.89) .020 (.51) .250 (6.35) .230 (5.84) 3°–9° .012 (.30) .008 (.20) .100 (2.54) typ. .130 (3.30) .110 (2.79) SMD Pin one I.D. APPLICATIONS • General Telecom Switching – On/off Hook Control – Ring Delay – Dial Pulse – Ground Start – Ground Fault Protection • Instrumentation • Industrial Controls DESCRIPTION 3 .268 (6.81) .255 (6.48) .268 (6.81) .255 (6.48) .390 (9.91) .379 (9.63) .045 (1.14) .030 (0.78) 4° typ. .050 (1.27) typ. .031 (.79) typ. .150 (3.81) .130 (3.30) Radius .008 (.25) .004 (.10) .040 (1.02) .020 (.51) .100 (2.54) typ. .395 (10.03) .375 (9.52) .312 (7.80) .298 (7.52) 10° .315 (8.00) typ. 3° to 7° .010 (2.54) typ. Part Identification Part Number Description LH1532AB 8-pin DIP, Tubes LH1532AAC 8-pin SMD, Gullwing, Tubes LH1532AACTR 8-pin SMD, Gullwing, Tape and Reel www.vishay.com 3–134 Absolute Maximum Ratings, TA=25°C Recommended Operating Conditions 120 Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute Maximum Ratings for extended periods of time can adversely affect reliability. Load Current (mA) 100 80 IFon=5.0 to 20 mA 60 40 20 IFon=2.0 mA IFon=3.0 mA IFon=4.0 mA 0 –40 –20 0 20 40 60 Ambient Temperature (°C) 80 Ambient Temperature Range (TA) .................................... –40 to +85°C Storage Temperature Range (Tstg) ................................. –40 to +150°C Pin Soldering Temperature (t=10 s max) (TS) ............................. 260°C Input/Output Isolation Voltage (t=1.0 s) (VISO)................................................................... 5300 VRMS Pole-to-Pole Isolation Voltage (S1 to S2)* (dry air, dust free, at sea level) ................................................. 1600 V LED Continuous Forward Current (IF) .........................................50 mA LED Reverse Voltage (IR≤10 µA) (VR)........................................... 8.0 V DC or Peak AC Load Voltage (IL≤50 µA) (VL) .............................. 350 V Continuous DC Load Current (IL) One Pole Operating.................................................................120 mA Two Poles Operating ...............................................................110 mA Peak Load Current (t=100 ms) (single shot) (IP) ................................ † Output Power Dissipation (continuous) (PDISS)........................ 600 mW * Breakdown occurs between the output pins external to the package. † Refer to Current Limit Performance Application Note for a discussion on relay operation during transient currents. Electrical Characteristics, TA=25°C Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. Parameter Sym. Min. Typ. Max. Units Test Conditions LED Forward Current, Switch Turn-on IFon — 1.0 2.0 mA IL=100 mA, t=10 ms LED Forward Current, Switch Turn-off IFoff 0.2 0.9 — mA VL±300 V LED Forward Voltage VF 1.15 1.26 1.45 V IF=10 mA ON-resistance RON 12 20 25 Ω IF=5.0 mA, IL=50 mA OFF-resistance ROFF 0.5 5000 — GΩ IF=0 mA, VL=±100 V Current Limit ILMT 170 210 250 mA IF=5.0 mA, t=5.0 ms VL=±6.0 V Off-state Leakage Current — — 0.02 200 nA IF=0 mA, VL=±100 V — — 1.0 µA IF=0 mA, VL=±350 V Output Capacitance — — 55 — pF IF=0 mA, VL=1.0 V — 10 — Input Output IF=0 mA, VL=50 V Pole-to-Pole Capacitance (S1 to S2) — — 0.5 — pF IF=5.0 mA Switch Offset — — 0.15 — V IF=5.0 mA Input/Output Capacitance CISO — 1.1 — pF VISO=1.0 V Turn-on Time ton — 1.4 2.5 ms IF=5.0 mA, IL=50 mA Turn-off Time toff — 0.7 2.5 ms IF=5.0 mA, IL=50 mA Transfer Document Number: 83829 Revision 17-August-01 www.vishay.com 3–135 Typical Performance Characteristics Figure 1. LED Voltage vs. Temperature Figure 4. LED Dropout Voltage vs. Temperature 1.20 1.6 LED Forward Voltage (V) LED Forward Voltage (V) IL= 100 mA 1.5 IF=50 mA IF=20 mA 1.4 1.3 1.2 IF=1.0 mA IF=2.0 mA 1.1 1.0 –40 0 20 40 60 Ambient Temperature (°C) 1.05 20 40 60 80 40 IL= 100 mA 40 20 0 –20 –40 IL= 50 mA 30 20 10 0 –10 –20 –30 –20 0 20 40 60 80 –40 –40 –20 0 20 40 60 80 Ambient Temperature (°C) Ambient Temperature (°C) Figure 3. Current Limit vs. Temperature Figure 6. Variation in On-resistance vs. LED Current 40 1.5 IF= 5.0 mA t = 5.0 ms VL= SEE ELEC. CHAR. 30 20 ac/dc On-resistance Variation (%) Normalized to Data Sheet RON Specification at IF=5.0 mA Change in Current Limit (%) Normalized to 25°C 0 50 60 10 0 –10 –20 –30 –40 –40 –20 Figure 5. On-resistance vs. Temperature Change in ON-resistance (%) Normalized to 25°C LED Forward Current for Switch Turn-on (%), Normalized to 25°C MIN. Ambient Temperature (°C) 100 –60 –40 1.10 0.95 –40 80 Figure 2. LED Current for Switch Turn-on vs. Temperature 80 TYP. 1.00 IF=5.0 mA IF=10 mA –20 1.15 –20 0 20 40 Ambient Temperature (°C) Document Number: 83829 Revision 17-August-01 60 80 IL= 50 mA 1.0 0.5 0 –0.5 0 4 8 12 16 20 LED Forward Current (mA) www.vishay.com 3–136 Figure 7. Switch Capacitance vs. Applied Voltage Figure 10. Leakage Current vs. Applied Voltage 80 100 70 Capacitance (pF) 60 Off-state Leakage Current (pA) IF=0 mA TA=25°C f=1.0 MHz 50 40 30 20 10 90 IF= 0 mA TA= 25 °C 80 70 60 50 40 30 20 10 0 0 20 40 60 80 0 100 0 50 100 150 Figure 8. Insertion Loss vs. Frequency 350 400 3.0 Off-state Leakage Current (nA) RL= 600 Ω 0.25 Insertion Loss (dB) 300 Figure 11. Leakage Current vs. Applied Voltage at Elevated Temperatures 0.30 0.20 0.15 0.10 0.05 2.5 85°C 2.0 1.5 70°C 1.0 0.5 50°C 0 102 103 104 105 0 50 Frequency (Hz) 200 250 300 350 400 8 Change in Breakdown Voltage (%) Normalized to 25°C 80 60 VP=10 V RL=50 Ω 20 0 102 150 Figure 12. Switch Breakdown Voltage vs. Temperature 100 40 100 Load Voltage (V) Figure 9. Output Isolation Isolation (dB) 250 Load Voltage (V) Applied Voltage (V) 0 200 103 104 105 Frequency (Hz) Document Number: 83829 Revision 17-August-01 106 107 6 4 2 0 –2 –4 –6 –8 –40 –20 0 20 40 60 80 Ambient Temperature (°C) www.vishay.com 3–137 Figure 13. Switch Offset Voltage vs. Temperature Figure 16. Turn-off Time vs. Temperature 3.5 160 140 IF= 5.0 mA Change in Turn-off Time (%) Normalized to 25°C Switch Offset Voltage (µV) 3.0 2.5 2.0 1.5 1.0 0.5 0 20 30 40 50 60 70 80 120 100 80 60 40 20 0 –20 –40 –60 –80 –40 90 IF=5.0 mA IL=50 mA –20 Ambient Temperature (°C) 40 60 80 Figure 17. Turn-on Time vs. LED Current 10 0.6 0.5 IL=50 mA 8 Turn-on Time (ms) Switch Offset Voltage (µV) 20 Ambient Temperature (°C) Figure 14. Switch Offset Voltage vs. LED Current 0.4 0.3 0.2 –40°C 6 25°C 85°C 4 2 0.1 0 0 0 5 10 15 20 0 25 10 LED Forward Current (mA) 30 40 50 Figure 18. Turn-off Time vs. LED Current 1.4 60 IL=50 mA 50 40 20 LED Forward Current (mA) Figure 15. Turn-on Time vs. Temperature IF=5.0 mA IL=50 mA –40°C 1.2 30 Turn-off Time (ms) Change in Turn-on Time (%) Normalized to 25°C 0 20 10 0 –10 –20 1.0 0.8 25°C 0.6 85°C 0.4 –30 –40 –40 0.2 –20 0 20 40 Ambient Temperature (°C) Document Number: 83829 Revision 17-August-01 60 80 0 10 20 30 40 50 LED Forward Current (mA) www.vishay.com 3–138