5.0x7.0mm Surface Mount LVDS Clock Oscillator Series Description Model SpecificationsFeatures: C 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 W 0846 The Connor-Winfield LMxxx LM 155.5 123 - Series are 5x7.0mm 2MHz Surface Mount, LVDS, Fixed Frequency Crystal Controlled Oscillator (XO). Through the use of multiplication, the LMxxx - Series are designed for applications requiring tight frequency stability, wide temperature range and low jitter. Operating at 2.5V or 3.3V supply voltage, the LMxxx Series provides LVDS Differential Outputs with enable / disable function. The surface mount package is designed for high-density mounting and is optimum for mass production. Model LMxxx - Series 5.0 x7.0mm Surface Mount Package 2.5V or 3.3V Operation LVDS Output Logic Frequency Stabilities Available: LM14x / LM34x / LM44x: +/-20ppm LM11x / LM31x / LM41x: +/-25ppm LM12x / LM22x / LM32x / LM42x: +/-50ppm LM13x / LM23x / LM33x / LM43x: +/-100ppm Temperature Ranges Available: LM1xx Series: 0 to 70°C LM2xx Series: -40 to 85°C LM3xx Series: 0 to 85°C LM4xx Series: -20 to 70°C Low Jitter <1pS RMS Tri-State Enable/Disable Tape and Reel Packaging RoHS Compliant / Lead Free Model Specifications Absolute Maximum Ratings Parameter Table 1.0 Units Storage Temperature Supply Voltage (Vcc) Input Voltage Minimum Nominal Maximum Units -55 - 125 °C -0.5 - 4.6 Vdc -0.5 - Vcc+0.5 Vdc Minimum 100 Nominal - Maximum 670 Units MHz Note ppm ppm ppm ppm 1 1 1 1 Operating Specifications Parameter Center Frequency Note Table 2.0 (Fo) Total Frequency Tolerance Model LMx4x (See Table 9) Model LMx1x (See Table 9) Model LMx2x (See Table 9) Model LMx3x (See Table 9) (See Table 9 for full part number) -20 20 -25 25 -50 50 -100 100 Operating Temperature Range Model LM1xx (See Table 9) 0 - 70 °C Model LM4xx (See Table 9) -20 - 70 °C Model LM3xx (See Table 9) 0 - 85 °C Model LM2xx (See Table 9) -40 - 85 °C Supply Voltage (Vcc) Model LMxx2 (See Table 9) 2.375 2.500 2.625 Vdc Model LMxx3 (See Table 9) 3.135 3.3 3.465 Vdc - 60 90 mA - 3 5 ps RMS ps RMS Supply Current (Icc) Period Jitter Phase Jitter- BW=12KHz to 20MHz - 0.6 1.0 SSB Phase Noise at 10Hz offset - -40 - dBc/Hz SSB Phase Noise at 100Hz offset - -75 - dBc/Hz SSB Phase Noise at 1KHz offset - -95 - dBc/Hz SSB Phase Noise at 10KHz offset - -110 - dBc/Hz SSB Phase Noise at 100KHz offset - -115 - dBc/Hz Sub-Harmonics - -60 -50 dBc Minimum Nominal Units 0.7Vcc - Maximum 0.3Vcc Vdc 2 - Vdc 2 Minimum Nominal Maximum Units 250 500 45 - 700 50 0.3 100 450 900 55 0.7 Ohms mV mV % ns Input Characteristics Table 3.0 Parameter Disable Input Voltage (Low) (Vil) Enable Input Voltage (High) (Vih) LVDS Output Characteristics Parameter LOAD Output Differential Voltage (Vod) Output Swing (Differential Output peak to peak) (Vopp) Duty Cycle measured at 50% Differential Rise / Fall Time 20% to 80% Bulletin Page Revision Date Ds030 1 of 2 P01 24 Sep 2009 Note Table 4.0 Note 3 4 Notes 1) 2) 3) 4) Includes initial tolerance, deviation over temperature, supply and load variations, shock, vibration and 20 years aging. When the oscillator is disabled, the outputs are at High Impedance. Output is enabled with no connection on pad 1. Vod measured with 100 ohm resistor between the true output and the complementary output. Duty Cycle measured at 50% of output swing. Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com Ordering Information LM Package Outline 2 1 Type: LVDS Clock Series 5x7mm Temperature Range: 1 = 0 to 70° C 2 = -40 to 85° C 3 = 0 to 85° C 4 = -20 to 70° C Frequency Stability: 4 = +/-20 ppm^ 1 = +/-25 ppm^ 2 = +/-50 ppm 3 = +/-100 ppm 3 Supply Voltage: 2 = 2.5Vdc. 3 = 3.3Vdc. - Output Frequency: Frequency Format -xxx.xM Min.* -xxx.xxxxxxM Max.* *Amount of numbers after the decimal point. M = MHz ^ Models LM212, LM213, LM242 and LM243 are not currently available. Example: LM123-155.52M = LVDS Clock, 0 to 70°C, +/-50ppm, 3.3Vdc @ 155.52 MHZ Package Characteristics Package Soldering Process 0.275 155.52M Table 5.0 Hermetically sealed ceramic package and metal cover. RoHS compliant, see solder profile on page 2. (7.0mm) CW 0846 LM123 155.52M 0.197 (5.0mm) 0.069 (1.75mm) Suggested Pad Layout Environmental Characteristics Vibration: Shock: Soldering: Solderability Table 6.0 Vibration per Mil Std 883E Method 2007.3 Test Condition A Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B. SMD product suitable for Convection Reflow soldering. Peak temperature 260°C. Maximum time above 220°C, 60 seconds. Solderability per Mil Std 883E Method 2003 LVDS Output Waveform Pad Connections - Enable / Disable Function Pad 1 2 3 4 5 6 Table 7.0 Connection Enable / Disable N/C Ground Q Output Q Output Vcc Table 8.0 Enable / Disable Function (Pad 1) High or Open Low Output Enable Disable (High Impedance) Model Matrix Table 9.0 Frequency Frequency Frequency Frequency Supply Temperature Tolerance Tolerance Tolerance Tolerance Voltage Range ±20ppm ±25ppm ±50ppm ±100ppm LM142 LM112 LM122 LM132 2.5Vdc 0 to 70°C LM442 LM412 LM422 LM432 2.5Vdc -20 to 70°C LM342 LM312 LM322 LM332 2.5Vdc 0 to 85°C x x LM222 LM232 2.5Vdc -40 to 85°C LM143 LM113 LM123 LM133 3.3Vdc 0 to 70°C LM443 LM413 LM423 LM433 3.3Vdc -20 to 70°C LM343 LM313 LM323 LM333 3.3Vdc 0 to 85°C x x LM223 LM233 3.3Vdc -40 to 85°C X = Models LM212, LM213, LM242 and LM243 are not currently available. Tape and Reel Specifications Duty Cycle Q Vod Vod Q Differential Output Waveform peak-to-peak Vopp 0V 80% 0V 0V 20% tf tr Test Circuit Vcc Power Supply Q Ground 100 ohm 0.01uF Q Enable/ Disable or N/C Solder Profile Temperature 260°C 260°C 220°C 180°C 1 150°C 120°C 0 120 S Max. US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation Time 10 S 60 S Max. 360 Sec. Max. Bulletin Ds030 Page 2 of 2 Revision Date P01 24 Sep 2009