CREE LM6-PPG1-3B-N1 Smd led Datasheet

Cree® SMD LED
Model # LM6-PPG1-3B-N1
Data Sheet
120-degree, 3.3 x 3.5-mm, SMT LED in green color with water-transparent lens and black coated surface
Applications
•
•
•
•
Indoor and Outdoor Displays
Backlighting
Coupling into Light Guides
RGB Full-Color Displays
Absolute Maximum Ratings (TA = 25°C)
Items
Symbol
Absolute Maximum Rating
Unit
R
Forward Current
IF
3 x 40
mA
IFP
3 x 100
mA
Reverse Voltage
VR
5
V
Power Dissipation
PD
3 x 160
mW
Operation Temperature
Topr
-40 ~ +100
°C
Storage Temperature
Tstg
-40 ~ +100
°C
Junction Temperature
TJ
110
°C
RTHJA
400
°C/W
RTHJA
580
°C/W
Junction/solder point 1 chip on
RTHJS
280
°C/W
Junction/solder point 3 chips on
RTHJS
430
°C/W
Note 1
Peak Forward Current
Note 2
Junction/ambient 1 chip on
Note 3
Junction/ambient 3 chips on
Note 3
Notes:
D-CT178.000
Data Sheet: CL
1.
2.
3.
Single-color light.
Pulse width ≤0.1 msec, duty ≤1/10.
RTH test condition: mounted on PC Board FR 4 (pad size ≥16 mm2)
Typical Electrical & Optical Characteristics (TA = 25°C)
Characteristics
Condition
Symbol
Minimum
Typical
Maximum
520
527
540
Dominant Wavelength
IF = 3 x 20 mA
λDOM
Viewing Angle at 50%
IF = 3 x 20 mA
2θ½
120
Forward Voltage
IF = 3 x 20 mA
VF
3.4
Luminous Intensity
IF = 3 x 20 mA
IV
VR = 5 V
IR
Reverse Current (max)
1120
Subject to change without notice.
www.cree.com/ledlamps
Unit
nm
deg
4.0
1600
V
mcd
10
μA
Standard Bins for LM6-PPG1-3B-N1 (IF = 3 x 20 mA)
Lamps are sorted to luminous intensity (IV) and chromaticity coordinates (x,y) bins shown.
Orders for LM6-PPG1-3B-N1 may be filled with any or all bins contained as below.
All luminous intensity (IV) and chromaticity coordinates (x,y) values shown and specified are at IF = 3 x 20 mA.
Luminous Intensity (IV)
X7
X8
X9
X10
Y1 or
above
2800 mcd
X2
2240 mcd
X1
1800 mcd
W2
1400 mcd
W1
1120 mcd
520 nm
525 nm
530 nm
535 nm
540 nm
Dominant Wavelength (WD)
Important Notes:
1. All ranks will be included per delivery; rank ratio will be based on the dice distribution.
2. Tolerance of measurement of luminous intensity is ±10%.
3. Tolerance of measurement of the dominant wavelength is ±1 nm.
4. Tolerance of measurement of VF is ±0.05 V.
5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document.
6. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions.
7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED
product safely.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT178.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Document No.
Rev. No.
Graphs
Graphs
100.0
If (mA)
-50
-40
-30
-20
-10
0
0.0
Vr(V)
80.0
-10.0
60.0
-20.0
40.0
-30.0
20.0
RELATIVE LUMINOUS INTENSITY
0.0
3.0
3.4 3.6 3.8 4.0
3.2
FIG.1 FORWARD CURRENT VS.
FORWARD VOLTAGE.
-40.0
Vf(V)
-50.0
Ir(uA)
FIG.2 REVERSE CURRENT VS.
REVERSE VOLTAGE.
Half Power WL=38nm
Domi WL= 527nm
5.0
4.0
100%
3.0
75%
2.0
50%
1.0
25%
If(mA)
0.0
0.0
0%
300
20.0 40.0 60.0 80.0 100.0
FIG.3 RELATIVE LUMINOUS
INTENSITY VS. FORWARD CURRENT
100
SPE/LM6-PPG1-3B-N1
01
400
500
600
WL(nm)
700
FIG.4 RELATIVE LUMINOUS INTENSITY VS.
WAVELENGTH.
IF(mA)
50% Power Angle : 120¢X
Ie(%)
0
80
60
100%
80%
1 CHIP ON
60%
40
40%
20
0
20%
3 CHIP ON
0
20
40
T ( C)
60
80
-90
100
FIG.5 MAXIMUM FORWARD DC CURRENT VS
SOLDER POINT TEMPERATURE
100
-60
-30
0
30
60
90
0%
FIG.6 FAR FIELD PATTERN.
IF(mA)
80
60
1 CHIP ON
40
20
0
3 CHIP ON
0
20
40
T ( C)
60
80
100
FIG.7 MAXIMUM FORWARD DC CURRENT VS
AMBIENT TEMPERATURE
Items
Signatures
Date
Prepared by
WangFJ
2007-04-06
Revision History
Rev.No
Date
Change Description
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are
Inc.
XieJH of Cree,2007-04-06
Checked
byregistered trademarks
CLD-CT178.000
DavidLiu
Approved
by
2007-04-06
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
isplays Mechanical Dimensions
Document No.
Rev. No.
Dimension Draw ing
SPE/LM6-PPG1-3B-N1
01
uides
ays
ngs at Ta = 25°C
All dimensions are in mm.
Symbol
Absolute maximum
Rating
Unit
IF
3X40
mA
IFP
3X100
mA
VR
5
V
PD
3X160
mW
Topr
-40~+100
°C
Tstg
-40~+100
°C
Tj
+110
°C
3
Rth JA
400
°C/W
3
Rth JA
580
°C/W
on
Rth JS
280
°C/W
on
Rth JS
430
°C/W
3
ty <=1/10* Rth test condition: Mounted on PC Board FR 4(pad size>=16mm2)
cal Characteristics(Ta = 25°C)
Symbol
Condition
Min.
Typ.
Max.
Unit
Odom
IF=3X20mA
520
527
540
nm
Notes
2 T½
IF=3X20mA
Deg.
--120
--RoHS Compliance
VF
IF=3X20mA
-3.4
4.0
V
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or
otherwise restricted materials in this product are below the maximum concentration values (also referred to as the
Iv
IF=3 X 20mA
1120
1600
-mcd
threshold limits)
permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment
IR
VR=5V
10
PA
(RoHS),
as amended
through --April 21, 2006.--Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT178.000
2/4
Format #: COTCO-D-074
REV.4
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage,
and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED
Lamp Packaging Standard” document for more information about shipping and packaging options.
Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following
manner:
Standard/Custom
0: Standard
C: Custom
VF
0: Full forward voltage distribution
1~9, A~Z . . . : special request *
Wd/Color
1: Full-color distribution
2~9, A~Z . . . : special request *
aaaaaaaaa-aaa-aa- x x x x x
IV
0: Full luminous intensity distribution
1~9, A~Z . . . : special request *
Packing type
0: Standard = tape pack
1~9, A~Z . . . : special request *
Product P/N
* Contact your Cree sales representative for ordering information.
Standard Available Kits*
Kit Number
LM6-PPG1-3B-N1-00001
Description
SMD 120 Pure Green 527nm, FULL RANK, Tape & Reel
* Please contact your Cree representative about the availability of non-standard kits.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT178.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Similar pages