Fairchild LM7810ACT 3-terminal 1a positive voltage regulator Datasheet

Revised December 2005
LM7805 • LM7806 • LM7808 • LM7809 •
LM7810 • LM7812 • LM7815 • LM7818 • LM7824 •
LM7805A • LM7806A • LM7808A •LM7809A •
LM7810A • LM7812A • LM7815A • LM7818A • LM7824A
3-Terminal 1A Positive Voltage Regulator
General Description
The LM78XX series of three terminal positive regulators are
available in the TO-220 package and with several fixed output
voltages, making them useful in a wide range of applications.
Each type employs internal current limiting, thermal shut down
and safe operating area protection, making it essentially indestructible. If adequate heat sinking is provided, they can deliver
over 1A output current. Although designed primarily as fixed
voltage regulators, these devices can be used with external
components to obtain adjustable voltages and currents.
Features
O Output Current up to 1A
O Output Voltages of 5, 6, 8, 9, 12, 15, 18, 24
O Thermal Overload Protection
O Short Circuit Protection
O Output Transistor Safe Operating Area Protection
Ordering Code:
Product Number
Output Voltage Tolerance
Package
Operating Temperature
LM7805CT
LM7806CT
LM7808CT
LM7809CT
LM7810CT
r4%
40qC - 125qC
LM7812CT
LM7815CT
LM7818CT
LM7824CT
TO-220
LM7805ACT
LM7806ACT
LM7808ACT
LM7809ACT
LM7810ACT
r2%
0qC - 125qC
LM7812ACT
LM7815ACT
LM7818ACT
LM7824ACT
© 2005 Fairchild Semiconductor Corporation
DS400018
www.fairchildsemi.com
LM7805 • LM7806 • LM7808 • LM7809 • LM7810 • LM7812 • LM7815 • LM7818 • LM7824 • LM7805A • LM7806A • LM7808A
•LM7809A • LM7810A • LM7812A • LM7815A • LM7818A • LM7824A 3-Terminal 1A Positive Voltage Regulator
April 1999
LM7805 • LM7806 • LM7808 • LM7809 • LM7810 • LM7812 • LM7815 • LM7818 • LM7824 • LM7805A • LM7806A • LM7808A
•LM7809A • LM7810A • LM7812A • LM7815A • LM7818A • LM7824A
Internal Block Diagram
www.fairchildsemi.com
2
Parameter
Symbol
Value
Unit
VI
35
V
VI
40
V
RTJC
5
qC/W
Input Voltage (for VO = 5V to 18V)
(for VO = 24V)
Thermal Resistance Junction-Cases (TO-220)
Thermal Resistance Junction-Air (TO-220)
RTJA
65
qC/W
Operating Temperature Range
TOPR
0 a 125
qC
40 a 125
qC
0 a 125
qC
65 a 150
qC
LM78xx
LM78xxA
Storage Temperature Range
TSTG
Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The datasheet specifications should be met, without exception, to ensure
that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation outside datasheet specifications.
Electrical Characteristics (LM7805)
(Refer to the test circuits. 40qC TJ 125qC, IO = 500mA, VI = 10V, CI = 0.1P F, unless otherwise specified)
Parameter
Output Voltage
Line Regulation
Symbol
VO
Regline
Min
Typ
Max
TJ = 25qC
Conditions
4.8
5.0
5.2
5mA d IO d 1A, PO d 15W, VI = 7V to 20V
4.75
5.0
5.25
TJ = 25qC
(Note 2)
Load Regulation
Quiescent Current
Quiescent Current Change
Regload
IQ
'IQ
V
VO = 7V to 25V
–
4.0
100
VI = 8V to 12V
–
1.6
50.0
mV
IO = 5mA to 1.5mA
–
9.0
100
IO = 250mA to 750mA
–
4.0
50.0
mV
TJ = 25qC
–
5.0
8.0
IO = 5mA to 1A
–
0.03
0.5
VI = 7V to 25V
–
0.3
1.3
mA
mA
IO = 5mA
–
0.8
–
mV/qC
Output Noise Voltage
VN
f = 10Hz to 100KHz, TA = 25qC
–
42.0
–
PV/VO
Ripple Rejection (Note 3)
RR
f = 120Hz, VO = 8V to 18V
62.0
73.0
–
dB
IO = 1A, TJ = 25qC
–
2.0
–
V
Output Voltage Drift (Note 3)
Dropout Voltage
'VO/'T
TJ = 25qC
Unit
VDROP
Output Resistance (Note 3)
rO
f = 1KHz
–
15.0
–
m:
Short Circuit Current
ISC
VI = 35V, TA = 25qC
–
230
–
mA
Peak Current (Note 3)
IPK
TJ =25qC
–
2.2
–
A
Note 2: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with
low duty is used.
Note 3: These parameters, although guaranteed, are not 100% tested in production.
3
www.fairchildsemi.com
LM7805 • LM7806 • LM7808 • LM7809 • LM7810 • LM7812 • LM7815 • LM7818 • LM7824 • LM7805A • LM7806A • LM7808A
•LM7809A • LM7810A • LM7812A • LM7815A • LM7818A • LM7824A
Absolute Maximum Ratings(Note 1)
LM7805 • LM7806 • LM7808 • LM7809 • LM7810 • LM7812 • LM7815 • LM7818 • LM7824 • LM7805A • LM7806A • LM7808A
•LM7809A • LM7810A • LM7812A • LM7815A • LM7818A • LM7824A
Electrical Characteristics (LM7806)
(Refer to the test circuits. 40qC TJ 125qC, IO = 500mA, VI = 11V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified)
Parameter
Output Voltage
Line Regulation
Symbol
VO
Regline
Min
Typ
Max
TJ = 25qC
Conditions
5.75
6.0
6.25
5mA d IO d 1A, PO d 15W, VI = 8.0V to 21V
5.7
6.0
6.3
VI = 8V to 25V
–
5.0
120
VI = 9V to 13V
–
1.5
60.0
TJ = 25qC
(Note 4)
Load Regulation
Regload
TJ = 25qC
Quiescent Current
Quiescent Current Change
IQ
'IQ
mV
–
9.0
120
IO = 250mA to 750mA
–
3.0
60.0
TJ = 25qC
–
5.0
8.0
IO = 5mA to 1A
–
–
0.5
VI = 8V to 25V
–
–
1.3
mV
mA
mA
IO = 5mA
–
0.8
–
mV/qC
Output Noise Voltage
VN
f = 10Hz to 100KHz, TA = 25qC
–
45.0
–
PV/VO
Ripple Rejection (Note 5)
RR
f = 120Hz, VO = 8V to 18V
62.0
73.0
–
dB
IO = 1A, TJ = 25qC
–
2.0
–
V
Output Voltage Drift (Note 5)
Dropout Voltage
'VO/'T
V
IO = 5mA to 1.5mA
(Note 4)
Unit
VDROP
Output Resistance (Note 5)
rO
f = 1KHz
–
19.0
–
m:
Short Circuit Current
ISC
VI = 35V, TA = 25qC
–
250
–
mA
Peak Current (Note 5)
IPK
TJ =25qC
–
2.2
–
A
Note 4: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with
low duty is used.
Note 5: These parameters, although guaranteed, are not 100% tested in production.
Electrical Characteristics (LM7808)
(Refer to the test circuits. 40qC TJ 125qC, IO = 500mA, VI = 14V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified)
Parameter
Output Voltage
Line Regulation
Symbol
VO
Regline
Min
Typ
Max
TJ = 25qC
Conditions
7.7
8.0
8.3
5mA d IO d 1A, PO d 15W, VI = 10.5V to 23V
7.6
8.0
8.4
TJ = 25qC
(Note 6)
Load Regulation
Regload
TJ = 25qC
(Note 6)
Quiescent Current
Quiescent Current Change
IQ
'IQ
V
VI = 10.5V to 25V
–
5.0
160
VI = 11.5V to 17V
–
2.0
80.0
IO = 5mA to 1.5mA
–
10.0
160
IO = 250mA to 750mA
–
5.0
80.0
mV
mV
TJ = 25qC
–
5.0
8.0
IO = 5mA to 1A
–
0.05
0.5
VI = 10.5V to 25V
–
0.5
1.0
mA
mA
IO = 5mA
–
0.8
–
mV/qC
Output Noise Voltage
VN
f = 10Hz to 100KHz, TA = 25qC
–
52.0
–
PV/VO
Ripple Rejection (Note 7)
RR
f = 120Hz, VO = 11.5V to 21.5V
56.0
73.0
–
dB
IO = 1A, TJ = 25qC
–
2.0
–
V
Output Voltage Drift (Note 7)
Dropout Voltage
'VO/'T
Unit
VDROP
Output Resistance (Note 7)
rO
f = 1KHz
–
17.0
–
m:
Short Circuit Current
ISC
VI = 35V, TA = 25qC
–
230
–
mA
Peak Current (Note 7)
IPK
TJ =25qC
–
2.2
–
A
Note 6: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with
low duty is used.
Note 7: These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
4
(Refer to the test circuits. 40qC TJ 125qC, IO = 500mA, VI = 15V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified)
Parameter
Output Voltage
Line Regulation
Symbol
VO
Regline
Min
Typ
Max
TJ = 25qC
Conditions
8.65
9.0
9.35
5mA d IO d 1A, PO d 15W, VI = 11.5V to 24V
8.6
9.0
9.4
VI = 11.5V to 25V
–
6.0
180
VI = 12V to 17V
–
2.0
90.0
IO = 5mA to 1.5mA
–
12.0
180
IO = 250mA to 750mA
–
4.0
90.0
TJ = 25qC
–
5.0
8.0
IO = 5mA to 1A
–
–
0.5
VI = 11.5V to 26V
–
–
1.3
TJ = 25qC
(Note 8)
Load Regulation
Regload
TJ = 25qC
(Note 8)
Quiescent Current
Quiescent Current Change
IQ
'IQ
V
mV
mV
mA
mA
IO = 5mA
–
1.0
–
mV/qC
Output Noise Voltage
VN
f = 10Hz to 100KHz, TA = 25qC
–
58.0
–
PV/VO
Ripple Rejection (Note 9)
RR
f = 120Hz, VO = 13V to 23V
56.0
71.0
–
dB
IO = 1A, TJ = 25qC
–
2.0
–
V
Output Voltage Drift (Note 9)
Dropout Voltage
'VO/'T
Unit
VDROP
Output Resistance (Note 9)
rO
f = 1KHz
–
17.0
–
m:
Short Circuit Current
ISC
VI = 35V, TA = 25qC
–
250
–
mA
Peak Current (Note 9)
IPK
TJ =25qC
–
2.2
–
A
Note 8: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with
low duty is used.
Note 9: These parameters, although guaranteed, are not 100% tested in production.
Electrical Characteristics (LM7810)
(Refer to the test circuits. 40qC TJ 125qC, IO = 500mA, VI = 16V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified)
Parameter
Output Voltage
Line Regulation
Symbol
VO
Regline
Min
Typ
Max
TJ = 25qC
Conditions
9.6
10.0
10.4
5mA d IO d 1A, PO d 15W, VI = 12.5V to 25V
9.5
10.0
10.5
VI = 12.5V to 25V
–
10.0
200
VI = 13V to 25V
–
3.0
100
IO = 5mA to 1.5mA
–
12.0
200
IO = 250mA to 750mA
–
4.0
400
TJ = 25qC
–
5.1
8.0
IO = 5mA to 1A
–
–
0.5
VI = 12.5V to 29V
–
–
1.0
TJ = 25qC
(Note 10)
Load Regulation
Regload
TJ = 25qC
(Note 10)
Quiescent Current
Quiescent Current Change
IQ
'IQ
V
mV
mV
mA
mA
IO = 5mA
–
1.0
–
mV/qC
Output Noise Voltage
VN
f = 10Hz to 100KHz, TA = 25qC
–
58.0
–
PV/VO
Ripple Rejection (Note 11)
RR
f = 120Hz, VO = 13V to 23V
56.0
71.0
–
dB
IO = 1A, TJ = 25qC
–
2.0
–
V
Output Voltage Drift (Note 11)
Dropout Voltage
'VO/'T
Unit
VDROP
Output Resistance (Note 11)
rO
f = 1KHz
–
17.0
–
m:
Short Circuit Current
ISC
VI = 35V, TA = 25qC
–
250
–
mA
Peak Current (Note 11)
IPK
TJ =25qC
–
2.2
–
A
Note 10: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with
low duty is used.
Note 11: These parameters, although guaranteed, are not 100% tested in production.
5
www.fairchildsemi.com
LM7805 • LM7806 • LM7808 • LM7809 • LM7810 • LM7812 • LM7815 • LM7818 • LM7824 • LM7805A • LM7806A • LM7808A
•LM7809A • LM7810A • LM7812A • LM7815A • LM7818A • LM7824A
Electrical Characteristics (LM7809)
LM7805 • LM7806 • LM7808 • LM7809 • LM7810 • LM7812 • LM7815 • LM7818 • LM7824 • LM7805A • LM7806A • LM7808A
•LM7809A • LM7810A • LM7812A • LM7815A • LM7818A • LM7824A
Electrical Characteristics (LM7812)
(Refer to the test circuits. 40qC TJ 125qC, IO = 500mA, VI = 19V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified)
Parameter
Output Voltage
Line Regulation
Symbol
VO
Regline
Min
Typ
Max
TJ = 25qC
Conditions
11.5
12.0
12.5
5mA d IO d 1A, PO d 15W, VI = 14.5V to 27V
11.4
12.0
12.6
VI = 14.5V to 30V
–
10.0
240
VI = 16V to 22V
–
3.0
120
IO = 5mA to 1.5mA
–
11.0
240
IO = 250mA to 750mA
–
5.0
120
TJ = 25qC
(Note 12)
Load Regulation
Regload
TJ = 25qC
(Note 12)
Quiescent Current
Quiescent Current Change
IQ
'IQ
V
mV
mV
TJ = 25qC
–
5.1
8.0
IO = 5mA to 1A
–
0.1
0.5
VI = 14.5V to 30V
–
0.5
1.0
mA
mA
IO = 5mA
–
1.0
–
mV/qC
Output Noise Voltage
VN
f = 10Hz to 100KHz, TA = 25qC
–
76.0
–
PV/VO
Ripple Rejection (Note 13)
RR
f = 120Hz, VI = 15V to 25V
55.0
71.0
–
dB
IO = 1A, TJ = 25qC
–
2.0
–
V
Output Voltage Drift (Note 13)
Dropout Voltage
'VO/'T
Unit
VDROP
Output Resistance (Note 13)
rO
f = 1KHz
–
18.0
–
m:
Short Circuit Current
ISC
VI = 35V, TA = 25qC
–
230
–
mA
Peak Current (Note 13)
IPK
TJ =25qC
–
2.2
–
A
Note 12: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with
low duty is used.
Note 13: These parameters, although guaranteed, are not 100% tested in production.
Electrical Characteristics (LM7815)
(Refer to the test circuits. 40qC TJ 125qC, IO = 500mA, VI = 23V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified)
Parameter
Output Voltage
Line Regulation
Symbol
VO
Regline
Min
Typ
Max
TJ = 25qC
Conditions
14.4
15.0
15.6
5mA d IO d 1A, PO d 15W, VI = 17.5V to 30V
14.25
15.0
15.75
VI = 17.5V to 30V
–
11.0
300
VI = 20V to 26V
–
3.0
150
IO = 5mA to 1.5mA
–
12.0
300
IO = 250mA to 750mA
–
4.0
150
TJ = 25qC
–
5.2
8.0
IO = 5mA to 1A
–
–
0.5
VI = 17.5V to 30V
–
–
1.0
TJ = 25qC
(Note 14)
Load Regulation
Regload
TJ = 25qC
(Note 14)
Quiescent Current
Quiescent Current Change
IQ
'IQ
V
mV
mV
mA
mA
IO = 5mA
–
1.0
–
mV/qC
Output Noise Voltage
VN
f = 10Hz to 100KHz, TA = 25qC
–
90.0
–
PV/VO
Ripple Rejection (Note 15)
RR
f = 120Hz, VI = 18.5V to 28.5V
54.0
70.0
–
dB
IO = 1A, TJ = 25qC
–
2.0
–
V
Output Voltage Drift (Note 15)
Dropout Voltage
'VO/'T
Unit
VDROP
Output Resistance (Note 15)
rO
f = 1KHz
–
19.0
–
m:
Short Circuit Current
ISC
VI = 35V, TA = 25qC
–
250
–
mA
Peak Current (Note 15)
IPK
TJ =25qC
–
2.2
–
A
Note 14: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with
low duty is used.
Note 15: These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
6
(Refer to the test circuits. 40qC TJ 125qC, IO = 500mA, VI = 27V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified)
Parameter
Output Voltage
Line Regulation
Symbol
VO
Regline
Min
Typ
Max
TJ = 25qC
Conditions
17.3
18.0
18.7
5mA d IO d 1A, PO d 15W, VI = 21V to 33V
17.1
18.0
18.9
VI = 21V to 33V
–
15.0
360
VI = 24V to 30V
–
5.0
180
IO = 5mA to 1.5mA
–
15.0
360
IO = 250mA to 750mA
–
5.0
180
TJ = 25qC
–
5.2
8.0
IO = 5mA to 1A
–
–
0.5
VI = 21V to 33V
–
–
1.0
TJ = 25qC
(Note 12)
Load Regulation
Regload
TJ = 25qC
(Note 12)
Quiescent Current
Quiescent Current Change
IQ
'IQ
V
mV
mV
mA
mA
IO = 5mA
–
1.0
–
mV/qC
Output Noise Voltage
VN
f = 10Hz to 100KHz, TA = 25qC
–
110
–
PV/VO
Ripple Rejection (Note 17)
RR
f = 120Hz, VI = 22V to 32V
53.0
69.0
–
dB
IO = 1A, TJ = 25qC
–
2.0
–
V
Output Voltage Drift (Note 17)
Dropout Voltage
'VO/'T
Unit
VDROP
Output Resistance (Note 17)
rO
f = 1KHz
–
22.0
–
m:
Short Circuit Current
ISC
VI = 35V, TA = 25qC
–
250
–
mA
Peak Current (Note 17)
IPK
TJ =25qC
–
2.2
–
A
Note 16: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with
low duty is used.
Note 17: These parameters, although guaranteed, are not 100% tested in production.
Electrical Characteristics (LM7824)
(Refer to the test circuits. 40qC TJ 125qC, IO = 500mA, VI = 33V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified)
Parameter
Output Voltage
Line Regulation
Symbol
VO
Regline
Min
Typ
Max
TJ = 25qC
Conditions
23.0
24.0
25.0
5mA d IO d 1A, PO d 15W, VI = 27V to 38V
22.8
24.0
25.25
VI = 27V to 38V
–
17.0
480
VI = 30V to 36V
–
6.0
240
IO = 5mA to 1.5mA
–
15.0
480
IO = 250mA to 750mA
–
5.0
240
TJ = 25qC
(Note 18)
Load Regulation
Regload
TJ = 25qC
(Note 18)
Quiescent Current
Quiescent Current Change
IQ
'IQ
V
mV
mV
TJ = 25qC
–
5.2
8.0
IO = 5mA to 1A
–
0.1
0.5
VI = 27V to 38V
–
0.5
1.0
mA
mA
IO = 5mA
–
1.5
–
mV/qC
Output Noise Voltage
VN
f = 10Hz to 100KHz, TA = 25qC
–
60.0
–
PV/VO
Ripple Rejection (Note 19)
RR
f = 120Hz, VI = 28V to 38V
50.0
67.0
–
dB
IO = 1A, TJ = 25qC
–
2.0
–
V
Output Voltage Drift (Note 19)
Dropout Voltage
'VO/'T
Unit
VDROP
Output Resistance (Note 19)
rO
f = 1KHz
–
28.0
–
m:
Short Circuit Current
ISC
VI = 35V, TA = 25qC
–
230
–
mA
Peak Current (Note 19)
IPK
TJ =25qC
–
2.2
–
A
Note 18: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with
low duty is used.
Note 19: These parameters, although guaranteed, are not 100% tested in production.
7
www.fairchildsemi.com
LM7805 • LM7806 • LM7808 • LM7809 • LM7810 • LM7812 • LM7815 • LM7818 • LM7824 • LM7805A • LM7806A • LM7808A
•LM7809A • LM7810A • LM7812A • LM7815A • LM7818A • LM7824A
Electrical Characteristics (LM7818)
LM7805 • LM7806 • LM7808 • LM7809 • LM7810 • LM7812 • LM7815 • LM7818 • LM7824 • LM7805A • LM7806A • LM7808A
•LM7809A • LM7810A • LM7812A • LM7815A • LM7818A • LM7824A
Electrical Characteristics (LM7805A)
(Refer to the test circuits. 0qC TJ 125qC, IO = 1A, VI = 10V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified)
Parameter
Output Voltage
Line Regulation
Symbol
VO
Regline
(Note 20)
Min
Typ
Max
TJ = 25qC
Conditions
4.9
5.0
5.1
IO = 5mA to 1A, PO d 15W, VI = 7.5V to 20V
4.8
5.0‘
5.2
VI = 7.5V to 25V, IO = 500mA
–
5.0
50.0
VI = 8V to 12V
–
3.0
50.0
–
5.0
50.0
TJ = 25qC
Regload
(Note 20)
Quiescent Current
Quiescent Current Change
IQ
'IQ
–
1.5
25.0
TJ = 25qC, IO = 5mA to 1.5mA
–
9.0
100
IO = 5mA to 1mA
–
9.0
100
IO = 250mA to 750mA
–
4.0
50.0
TJ = 25qC
–
5.0
6.0
IO = 5mA to 1A
–
–
0.5
VI = 8V to 25V, IO = 500mA
–
–
0.8
VI = 7.5V to 20V, TJ = 25qC
–
–
0.8
mV
mA
mA
IO = 5mA
–
0.8
–
mV/qC
Output Noise Voltage
VN
f = 10Hz to 100KHz, TA = 25qC
–
10.0
–
PV/VO
Ripple Rejection (Note 21)
RR
f = 120Hz, IO = 500mA, VI = 8V to 18V
–
68.0
–
dB
IO = 1A, TJ = 25qC
–
2.0
–
V
Output Voltage Drift (Note 21)
Dropout Voltage
'VO/'T
V
mV
VI = 7.3V to 20V
VI = 8V to 12V
Load Regulation
Unit
VDROP
Output Resistance (Note 21)
rO
f = 1KHz
–
17.0
–
m:
Short Circuit Current
ISC
VI = 35V, TA = 25qC
–
250
–
mA
Peak Current (Note 21)
IPK
TJ =25qC
–
2.2
–
A
Note 20: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with
low duty is used.
Note 21: These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
8
(Refer to the test circuits. 0qC TJ 125qC, IO = 1A, VI = 11V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified)
Parameter
Output Voltage
Line Regulation
Symbol
VO
Regline
(Note 22)
Min
Typ
Max
TJ = 25qC
Conditions
5.58
6.0
6.12
IO = 5mA to 1A, PO d 15W, VI = 8.6V to 21V
5.76
6.0
6.24
VI = 8.6V to 25V, IO = 500mA
–
5.0
60.0
VI = 9V to 13V
–
3.0
60.0
–
5.0
60.0
TJ = 25qC
Regload
(Note 22)
Quiescent Current
Quiescent Current Change
IQ
'IQ
–
1.5
30.0
TJ = 25qC, IO = 5mA to 1.5mA
–
9.0
100
IO = 5mA to 1mA
–
4.0
100
IO = 250mA to 750mA
–
5.0
50.0
TJ = 25qC
–
4.3
6.0
IO = 5mA to 1A
–
–
0.5
VI = 19V to 25V, IO = 500mA
–
–
0.8
VI = 8.5V to 21V, TJ = 25qC
–
–
0.8
mV
mA
mA
IO = 5mA
–
0.8
–
mV/qC
Output Noise Voltage
VN
f = 10Hz to 100KHz, TA = 25qC
–
10.0
–
PV/VO
Ripple Rejection (Note 23)
RR
f = 120Hz, IO = 500mA, VI = 9V to 19V
–
65.0
–
dB
IO = 1A, TJ = 25qC
–
2.0
–
V
Output Voltage Drift (Note 23)
Dropout Voltage
'VO/'T
V
mV
VI = 8.3V to 21V
VI = 9V to 13V
Load Regulation
Unit
VDROP
Output Resistance (Note 23)
rO
f = 1KHz
–
17.0
–
m:
Short Circuit Current
ISC
VI = 35V, TA = 25qC
–
250
–
mA
Peak Current (Note 23)
IPK
TJ =25qC
–
2.2
–
A
Note 22: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with
low duty is used.
Note 23: These parameters, although guaranteed, are not 100% tested in production.
9
www.fairchildsemi.com
LM7805 • LM7806 • LM7808 • LM7809 • LM7810 • LM7812 • LM7815 • LM7818 • LM7824 • LM7805A • LM7806A • LM7808A
•LM7809A • LM7810A • LM7812A • LM7815A • LM7818A • LM7824A
Electrical Characteristics (LM7806A)
LM7805 • LM7806 • LM7808 • LM7809 • LM7810 • LM7812 • LM7815 • LM7818 • LM7824 • LM7805A • LM7806A • LM7808A
•LM7809A • LM7810A • LM7812A • LM7815A • LM7818A • LM7824A
Electrical Characteristics (LM7808A)
(Refer to the test circuits. 0qC TJ 125qC, IO = 1A, VI = 14V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified)
Parameter
Output Voltage
Line Regulation
Symbol
VO
Regline
(Note 24)
Min
Typ
Max
TJ = 25qC
Conditions
7.84
8.0
8.16
IO = 5mA to 1A, PO d 15W, VI = 10.6V to 23V
7.7
8.0
8.3
VI = 10.6V to 25V, IO = 500mA
–
6.0
80.0
VI = 11V to 17V
–
3.0
80.0
–
6.0
80.0
TJ = 25qC
Regload
(Note 24)
Quiescent Current
Quiescent Current Change
IQ
'IQ
–
2.0
40.0
TJ = 25qC, IO = 5mA to 1.5mA
–
12.0
100
IO = 5mA to 1mA
–
12.0
100
IO = 250mA to 750mA
–
5.0
50.0
TJ = 25qC
–
5.0
6.0
IO = 5mA to 1A
–
–
0.5
VI = 11V to 25V, IO = 500mA
–
–
0.8
VI = 10.6V to 23V, TJ = 25qC
–
–
0.8
mV
mA
mA
IO = 5mA
–
0.8
–
mV/qC
Output Noise Voltage
VN
f = 10Hz to 100KHz, TA = 25qC
–
10.0
–
PV/VO
Ripple Rejection (Note 25)
RR
f = 120Hz, IO = 500mA, VI = 11.5V to 21.5V
–
62.0
–
dB
IO = 1A, TJ = 25qC
–
2.0
–
V
Output Voltage Drift (Note 25)
Dropout Voltage
'VO/'T
V
mV
VI = 10.4V to 23V
VI = 11V to 17V
Load Regulation
Unit
VDROP
Output Resistance (Note 25)
rO
f = 1KHz
–
18.0
–
m:
Short Circuit Current
ISC
VI = 35V, TA = 25qC
–
250
–
mA
Peak Current (Note 25)
IPK
TJ =25qC
–
2.2
–
A
Note 24: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with
low duty is used.
Note 25: These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
10
(Refer to the test circuits. 0qC TJ 125qC, IO = 1A, VI = 15V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified)
Parameter
Output Voltage
Line Regulation
Symbol
VO
Regline
(Note 26)
Min
Typ
Max
TJ = 25qC
Conditions
8.82
9.0
9.16
IO = 5mA to 1A, PO d 15W, VI = 11.2V to 24V
8.65
9.0
9.35
VI = 11.7V to 25V, IO = 500mA
–
6.0
90.0
VI = 12.5V to 19V
–
4.0
45.0
–
6.0
90.0
TJ = 25qC
Regload
(Note 26)
Quiescent Current
Quiescent Current Change
IQ
'IQ
–
2.0
45.0
TJ = 25qC, IO = 5mA to 1.0mA
–
12.0
100
IO = 5mA to 1mA
–
12.0
100
IO = 250mA to 750mA
–
5.0
50.0
TJ = 25qC
–
5.0
6.0
IO = 5mA to 1A
–
–
0.5
VI = 12V to 25V, IO = 500mA
–
–
0.8
VI = 11.7V to 25V, TJ = 25qC
–
–
0.8
mV
mA
mA
IO = 5mA
–
1.0
–
mV/qC
Output Noise Voltage
VN
f = 10Hz to 100KHz, TA = 25qC
–
10.0
–
PV/VO
Ripple Rejection (Note 27)
RR
f = 120Hz, IO = 500mA, VI = 12V to 22V
–
62.0
–
dB
IO = 1A, TJ = 25qC
–
2.0
–
V
Output Voltage Drift (Note 27)
Dropout Voltage
'VO/'T
V
mV
VI = 11.5V to 24V
VI = 12.5V to 19V
Load Regulation
Units
VDROP
Output Resistance (Note 27)
rO
f = 1KHz
–
17.0
–
m:
Short Circuit Current
ISC
VI = 35V, TA = 25qC
–
250
–
mA
Peak Current (Note 27)
IPK
TJ =25qC
–
2.2
–
A
Note 26: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with
low duty is used.
Note 27: These parameters, although guaranteed, are not 100% tested in production.
11
www.fairchildsemi.com
LM7805 • LM7806 • LM7808 • LM7809 • LM7810 • LM7812 • LM7815 • LM7818 • LM7824 • LM7805A • LM7806A • LM7808A
•LM7809A • LM7810A • LM7812A • LM7815A • LM7818A • LM7824A
Electrical Characteristics (LM7809A)
LM7805 • LM7806 • LM7808 • LM7809 • LM7810 • LM7812 • LM7815 • LM7818 • LM7824 • LM7805A • LM7806A • LM7808A
•LM7809A • LM7810A • LM7812A • LM7815A • LM7818A • LM7824A
Electrical Characteristics (LM7810A)
(Refer to the test circuits. 0qC TJ 125qC, IO = 1A, VI = 16V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified)
Parameter
Output Voltage
Line Regulation
Symbol
VO
Regline
(Note 28)
Min
Typ
Max
TJ = 25qC
Conditions
9.8
10.0
10.2
IO = 5mA to 1A, PO d 15W, VI = 12.8V to 25V
9.6
10.0
10.4
VI = 12.8V to 26V, IO = 500mA
–
8.0
100
VI = 13V to 20V
–
4.0
50.0
–
8.0
100
TJ = 25qC
Regload
(Note 28)
Quiescent Current
Quiescent Current Change
IQ
'IQ
–
3.0
50.0
TJ = 25qC, IO = 5mA to 1.5mA
–
12.0
100
IO = 5mA to 1mA
–
12.0
100
IO = 250mA to 750mA
–
5.0
50.0
TJ = 25qC
–
5.0
6.0
IO = 5mA to 1A
–
–
0.5
VI = 12.8V to 25V, IO = 500mA
–
–
0.8
VI = 13V to 26V, TJ = 25qC
–
–
0.5
mV
mA
mA
IO = 5mA
–
1.0
–
mV/qC
Output Noise Voltage
VN
f = 10Hz to 100KHz, TA = 25qC
–
10.0
–
PV/VO
Ripple Rejection (Note 29)
RR
f = 120Hz, IO = 500mA, VI = 14V to 24V
–
62.0
–
dB
IO = 1A, TJ = 25qC
–
2.0
–
V
Output Voltage Drift (Note 29)
Dropout Voltage
'VO/'T
V
mV
VI = 12.5V to 25V
VI = 13V to 20V
Load Regulation
Units
VDROP
Output Resistance (Note 29)
rO
f = 1KHz
–
17.0
–
m:
Short Circuit Current
ISC
VI = 35V, TA = 25qC
–
250
–
mA
Peak Current (Note 29)
IPK
TJ =25qC
–
2.2
–
A
Note 28: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with
low duty is used.
Note 29: These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
12
(Refer to the test circuits. 0qC TJ 125qC, IO = 1A, VI = 19V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified)
Parameter
Output Voltage
Line Regulation
Symbol
VO
Regline
(Note 30)
Min
Typ
Max
TJ = 25qC
Conditions
11.75
12.0
12.25
IO = 5mA to 1A, PO d 15W, VI = 14.8V to 27V
11.5
12.0
12.5
VI = 14.8V to 30V, IO = 500mA
–
10.0
120
VI = 16V to 22V
–
4.0
120
–
10.0
120
TJ = 25qC
Regload
(Note 30)
Quiescent Current
Quiescent Current Change
IQ
'IQ
–
3.0
60.0
TJ = 25qC, IO = 5mA to 1.5mA
–
12.0
100
IO = 5mA to 1mA
–
12.0
100
IO = 250mA to 750mA
–
5.0
50.0
TJ = 25qC
–
5.1
6.0
IO = 5mA to 1A
–
–
0.5
VI = 14V to 27V, IO = 500mA
–
–
0.8
VI = 15V to 30V, TJ = 25qC
–
–
0.8
mV
mA
mA
IO = 5mA
–
1.0
–
mV/qC
Output Noise Voltage
VN
f = 10Hz to 100KHz, TA = 25qC
–
10.0
–
PV/VO
Ripple Rejection (Note 31)
RR
f = 120Hz, IO = 500mA, VI = 14V to 24V
–
60.0
–
dB
IO = 1A, TJ = 25qC
–
2.0
–
V
Output Voltage Drift (Note 31)
Dropout Voltage
'VO/'T
V
mV
VI = 14.5V to 27V
VI = 16V to 22V
Load Regulation
Units
VDROP
Output Resistance (Note 31)
rO
f = 1KHz
–
18.0
–
m:
Short Circuit Current
ISC
VI = 35V, TA = 25qC
–
250
–
mA
Peak Current (Note 31)
IPK
TJ =25qC
–
2.2
–
A
Note 30: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with
low duty is used.
Note 31: These parameters, although guaranteed, are not 100% tested in production.
13
www.fairchildsemi.com
LM7805 • LM7806 • LM7808 • LM7809 • LM7810 • LM7812 • LM7815 • LM7818 • LM7824 • LM7805A • LM7806A • LM7808A
•LM7809A • LM7810A • LM7812A • LM7815A • LM7818A • LM7824A
Electrical Characteristics (LM7812A)
LM7805 • LM7806 • LM7808 • LM7809 • LM7810 • LM7812 • LM7815 • LM7818 • LM7824 • LM7805A • LM7806A • LM7808A
•LM7809A • LM7810A • LM7812A • LM7815A • LM7818A • LM7824A
Electrical Characteristics (LM7815A)
(Refer to the test circuits. 0qC TJ 125qC, IO = 1A, VI = 23V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified)
Parameter
Output Voltage
Line Regulation
Symbol
VO
Regline
(Note 32)
Min
Typ
Max
TJ = 25qC
Conditions
14.75
15.0
15.3
IO = 5mA to 1A, PO d 15W, VI = 17.7V to 30V
14.4
15.0
15.6
VI = 17.4V to 30V, IO = 500mA
–
10.0
150
VI = 20V to 26V
–
5.0
150
–
11.0
150
TJ = 25qC
Regload
(Note 32)
Quiescent Current
Quiescent Current Change
IQ
'IQ
–
3.0
75.0
TJ = 25qC, IO = 5mA to 1.5mA
–
12.0
100
IO = 5mA to 1mA
–
12.0
100
IO = 250mA to 750mA
–
5.0
50.0
TJ = 25qC
–
5.2
6.0
IO = 5mA to 1A
–
–
0.5
VI = 17.5V to 30V, IO = 500mA
–
–
0.8
VI = 17.5V to 30V, TJ = 25qC
–
–
0.8
mV
mA
mA
IO = 5mA
–
1.0
–
mV/qC
Output Noise Voltage
VN
f = 10Hz to 100KHz, TA = 25qC
–
10.0
–
PV/VO
Ripple Rejection (Note 33)
RR
f = 120Hz, IO = 500mA, VI = 18.5V to 28.5V
–
58.0
–
dB
IO = 1A, TJ = 25qC
–
2.0
–
V
Output Voltage Drift (Note 33)
Dropout Voltage
'VO/'T
V
mV
VI = 17.5V to 30V
VI = 20V to 26V
Load Regulation
Units
VDROP
Output Resistance (Note 33)
rO
f = 1KHz
–
19.0
–
m:
Short Circuit Current
ISC
VI = 35V, TA = 25qC
–
250
–
mA
Peak Current (Note 33)
IPK
TJ =25qC
–
2.2
–
A
Note 32: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with
low duty is used.
Note 33: These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
14
(Refer to the test circuits. 0qC TJ 125qC, IO = 1A, VI = 27V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified)
Parameter
Output Voltage
Line Regulation
Symbol
VO
Regline
(Note 34)
Min
Typ
Max
TJ = 25qC
Conditions
17.64
18.0
18.36
IO = 5mA to 1A, PO d 15W, VI = 21V to 33V
17.3
18.0
18.7
VI = 21V to 33V, IO = 500mA
–
15.0
180
VI = 21V to 33V
–
5.0
180
–
15.0
180
TJ = 25qC
Regload
(Note 34)
Quiescent Current
Quiescent Current Change
IQ
'IQ
–
5.0
90.0
TJ = 25qC, IO = 5mA to 1.5mA
–
15.0
100
IO = 5mA to 1mA
–
15.0
100
IO = 250mA to 750mA
–
7.0
50.0
TJ = 25qC
–
5.2
6.0
IO = 5mA to 1A
–
–
0.5
VI = 12V to 33V, IO = 500mA
–
–
0.8
VI = 12V to 33V, TJ = 25qC
–
–
0.8
mV
mA
mA
IO = 5mA
–
1.0
–
mV/qC
Output Noise Voltage
VN
f = 10Hz to 100KHz, TA = 25qC
–
10.0
–
PV/VO
Ripple Rejection (Note 35)
RR
f = 120Hz, IO = 500mA, VI = 22V to 32V
–
57.0
–
dB
IO = 1A, TJ = 25qC
–
2.0
–
V
Output Voltage Drift (Note 35)
Dropout Voltage
'VO/'T
V
mV
VI = 20.6V to 33V
VI = 24V to 30V
Load Regulation
Units
VDROP
Output Resistance (Note 35)
rO
f = 1KHz
–
19.0
–
m:
Short Circuit Current
ISC
VI = 35V, TA = 25qC
–
250
–
mA
Peak Current (Note 35)
IPK
TJ =25qC
–
2.2
–
A
Note 34: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with
low duty is used.
Note 35: These parameters, although guaranteed, are not 100% tested in production.
15
www.fairchildsemi.com
LM7805 • LM7806 • LM7808 • LM7809 • LM7810 • LM7812 • LM7815 • LM7818 • LM7824 • LM7805A • LM7806A • LM7808A
•LM7809A • LM7810A • LM7812A • LM7815A • LM7818A • LM7824A
Electrical Characteristics (LM7818A)
LM7805 • LM7806 • LM7808 • LM7809 • LM7810 • LM7812 • LM7815 • LM7818 • LM7824 • LM7805A • LM7806A • LM7808A
•LM7809A • LM7810A • LM7812A • LM7815A • LM7818A • LM7824A
Electrical Characteristics (LM7824A)
(Refer to the test circuits. 0qC TJ 125qC, IO = 1A, VI = 33V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified)
Parameter
Output Voltage
Line Regulation
Symbol
VO
Regline
(Note 36)
Min
Typ
Max
TJ = 25qC
Conditions
23.5
24.0
24.5
IO = 5mA to 1A, PO d 15W, VI = 27.3V to 38V
23.0
24.0
25.0
VI = 27V to 38V, IO = 500mA
–
18.0
240
VI = 21V to 33V
–
6.0
240
–
18.0
240
TJ = 25qC
Regload
(Note 36)
Quiescent Current
Quiescent Current Change
IQ
'IQ
–
6.0
120
–
15.0
100
IO = 5mA to 1mA
–
15.0
100
IO = 250mA to 750mA
–
7.0
50.0
TJ = 25qC
–
5.2
6.0
IO = 5mA to 1A
–
–
0.5
VI = 27.3V to 38V, IO = 500mA
–
–
0.8
VI = 27.3V to 38V, TJ = 25qC
–
–
0.8
TJ = 25qC, IO = 5mA to 1.5mA
mV
mA
mA
IO = 5mA
–
1.5
–
mV/qC
Output Noise Voltage
VN
f = 10Hz to 100KHz, TA = 25qC
–
10.0
–
PV/VO
Ripple Rejection (Note 37)
RR
f = 120Hz, IO = 500mA, VI = 28V to 38V
–
54.0
–
dB
IO = 1A, TJ = 25qC
–
2.0
–
V
Output Voltage Drift (Note 37)
Dropout Voltage
'VO/'T
V
mV
VI = 26.7V to 38V
VI = 30V to 36V
Load Regulation
Units
VDROP
Output Resistance (Note 37)
rO
f = 1KHz
–
20.0
–
m:
Short Circuit Current
ISC
VI = 35V, TA = 25qC
–
250
–
mA
Peak Current (Note 37)
IPK
TJ =25qC
–
2.2
–
A
Note 36: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with
low duty is used.
Note 37: These parameters, although guaranteed, are not 100% tested in production.
www.fairchildsemi.com
16
FIGURE 1. Quiescent Current
FIGURE 2. Peak Output Current
FIGURE 3. Output Voltage
FIGURE 4. Quiescent Current
www.fairchildsemi.com
17
LM7805 • LM7806 • LM7808 • LM7809 • LM7810 • LM7812 • LM7815 • LM7818 • LM7824 • LM7805A • LM7806A • LM7808A
•LM7809A • LM7810A • LM7812A • LM7815A • LM7818A • LM7824A
Typical Performance Characteristics
LM7805 • LM7806 • LM7808 • LM7809 • LM7810 • LM7812 • LM7815 • LM7818 • LM7824 • LM7805A • LM7806A • LM7808A
•LM7809A • LM7810A • LM7812A • LM7815A • LM7818A • LM7824A
Typical Applications
FIGURE 5. DC Parameters
FIGURE 6. Load Regulation
FIGURE 7. Ripple Rejection
FIGURE 8. Fixed Output Regulator
www.fairchildsemi.com
18
FIGURE 9.
Note: To specify an output voltage, substitute voltage value for “XX”. A common ground is required between the Input and the Output voltage. The input voltage must remain typically 2.0V above the output voltage even during the low point on the input ripple voltage.
Note: CI is required if regulator is located an appreciable distance from the power supply filter.
Note: CO improves stability and transient response.
IRI t 5 IQ
VO = VXX (1 R2 / R1) IQ R2
FIGURE 10. Circuit for Increasing Output Voltage
IRI t 5 IQ
VO = VXX (1 R2 / R1) IQ R2
FIGURE 11. Adjustable Output Regulator (7V to 30V)
19
www.fairchildsemi.com
LM7805 • LM7806 • LM7808 • LM7809 • LM7810 • LM7812 • LM7815 • LM7818 • LM7824 • LM7805A • LM7806A • LM7808A
•LM7809A • LM7810A • LM7812A • LM7815A • LM7818A • LM7824A
Typical Applications (continued)
LM7805 • LM7806 • LM7808 • LM7809 • LM7810 • LM7812 • LM7815 • LM7818 • LM7824 • LM7805A • LM7806A • LM7808A
•LM7809A • LM7810A • LM7812A • LM7815A • LM7818A • LM7824A
Typical Applications (continued)
FIGURE 12. High Current Voltage Regulator
FIGURE 13. High Output Current with Short Circuit Protection
FIGURE 14. Tracking Voltage Regulator
www.fairchildsemi.com
20
LM7805 • LM7806 • LM7808 • LM7809 • LM7810 • LM7812 • LM7815 • LM7818 • LM7824 • LM7805A • LM7806A • LM7808A
•LM7809A • LM7810A • LM7812A • LM7815A • LM7818A • LM7824A
Typical Applications (continued)
FIGURE 15. Split Power Supply (r15V - 1A)
FIGURE 16. Negative Output Voltage Circuit
FIGURE 17. Switching Regulator
21
www.fairchildsemi.com
LM7805 • LM7806 • LM7808 • LM7809 • LM7810 • LM7812 • LM7815 • LM7818 • LM7824 • LM7805A • LM7806A • LM7808A
•LM7809A • LM7810A • LM7812A • LM7815A • LM7818A • LM7824A
Physical Dimensions inches (millimeters) unless otherwise noted
Package Number TO-220
www.fairchildsemi.com
22
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY
ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT
CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES
OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION
As used herein:
provided in the labeling, can be reasonably expected to
result in significant injury to the user.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body, or
2. A critical component is any component of a life support
(b) support or sustain life, or (c) whose failure to perform
device or system whose failure to perform can be reasonwhen properly used in accordance with instructions for use
ably expected to cause the failure of the life support device
or system, or to affect its safety or effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of terms
Datasheet Identification Product Status
Definition
Advance Information
Formative or In Design
This datasheet contains the design specifications for product development. Specifications may change in any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and supplementary data will
be published at a later date. Fairchild Semiconductor reserves the right
to make changes at any time without notice in order to improve design.
No Identification Needed
Full Production
This datasheet contains final specifications. Fairchild Semiconductor
reserves the right to make changes at any time without notice in order
to improve design.
Obsolete
Not In Production
This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only.
23
www.fairchildsemi.com
LM7805 • LM7806 • LM7808 • LM7809 • LM7810 • LM7812 • LM7815 • LM7818 • LM7824 • LM7805A • LM7806A • LM7808A
•LM7809A • LM7810A • LM7812A • LM7815A • LM7818A • LM7824A 3-Terminal 1A Positive Voltage Regulator
DISCLAIMER
Similar pages