STMicroelectronics LMV324IYPT Low cost low power input/output rail-to-rail operational amplifier Datasheet

LMV321-LMV358-LMV324
Low cost low power input/output rail-to-rail
operational amplifiers
Features
■
Operating range from VCC = 2.7 V to 6 V
■
Rail-to-rail input and output
■
Extended Vicm (VDD - 0.2 V to VCC + 0.2 V)
■
Low supply current (145 µA)
■
Gain bandwidth product (1 MHz)
■
ESD tolerance (2 kV)
■
Latch-up immunity
■
Available in SOT23-5 micropackage
LMV321ILT
(SOT23-5)
Non Inverting Input 1
VDD
Two-cell battery-powered systems
■
Battery-powered electronic equipment
■
Cordless phones
■
Personal medical care (glucose meter)
■
Laptops
■
PDAs
4
Output
5
VCC
4
Inverting Input
+
_
LMV321RILT
(SOT23-5)
Output
1
VDD
2
Non Inverting Input
3
LMV358ID/IDT-LMV358IPT
(SO-8, TSSOP-8)
Output 1
Description
1
Inverting Input 1
2
_
Non Inverting Input 1
3
+
VDD
The LMV321/358/324 family (single, dual and
quad) answers the need for low cost, general
purpose operational amplifiers. They operate with
voltages as low as 2.7 V and feature both input
and output rail-to-rail, 145 µA consumption
current and 1 MHz gain bandwidth product
(GBP).
_
+
4
8
VCC
7
Output 2
6
Inverting Input 2
5
Non Inverting Input 2
LMV324ID/IDT-LMV324IPT
(SO-14, TSSOP-14)
With a such low consumption and a sufficient
GBP for many applications, these op-amps are
very well-suited for any kind of battery-supplied
and portable equipment application.
The LMV321 is housed in the space-saving 5-pin
SOT23-5 package which simplifies the board
design (overall dimensions are 2.8 mm x 2.9 mm).
The SOT23-5 has two pinning configurations to
answer all application requirements.
February 2008
VCC
Inverting Input 3
Applications
■
2
5
Rev 3
14 Output 4
Output 1
1
Inverting Input 1
2
_
_
13 Inverting Input 4
Non Inverting Input 1
3
+
+
12 Non Inverting Input 4
VCC
4
Non Inverting Input 2
5
Inverting Input 2
6
Output 2
7
11 VDD
+
_
+
_
10 Non Inverting Input 3
9
Inverting Input 3
8
Output 3
1/14
www.st.com
14
Absolute maximum ratings and operating conditions
1
LMV321-LMV358-LMV324
Absolute maximum ratings and operating conditions
Table 1.
Absolute maximum ratings
Symbol
VCC
Parameter
Supply voltage
Value
Unit
7
V
(1)
Vid
Differential input voltage
Vin
Input voltage
(2)
±1
V
VDD-0.3 to VCC+0.3
V
Toper
Operating free air temperature range
-40 to + 125
°C
Tstg
Storage temperature
-65 to +150
°C
Maximum junction temperature
150
°C
Rthja
Thermal resistance junction to ambient (3)
SOT23-5
SO-8
SO-14
TSSOP8
TSSOP14
250
125
103
120
100
Rthjc
Thermal resistance junction to case(3)
SOT23-5
SO-8
SO-14
TSSOP8
TSSOP14
81
40
31
37
32
HBM: human body model(4)
2
kV
200
V
1.5
kV
250
°C
Tj
ESD
(5)
MM: machine model
CDM: charged device model
(6)
Lead temperature (soldering, 10sec)
Output short-circuit duration
°C/W
°C/W
see note(7)
1. All voltage values, except differential voltage are with respect to network terminal.
2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. If
Vid > ±1 V, the maximum input current must not exceed ±1 mA. In this case (Vid > ±1 V), an input series
resistor must be added to limit input current.
3. Short-circuits can cause excessive heating. Destructive dissipation can result from simultaneous shortcircuits on all amplifiers. All values are typical.
4. Human body model: A 100 pF capacitor is charged to the specified voltage, then discharged through a
1.5 kΩ resistor between two pins of the device. This is done for all couples of connected pin combinations
while the other pins are floating.
5. Machine model: A 200 pF capacitor is charged to the specified voltage, then discharged directly between
two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of
connected pin combinations while the other pins are floating.
6. Charged device model: all pins and the package are charged together to the specified voltage and then
discharged directly to the ground through only one pin. This is done for all pins.
No value specified for CDM on SOT23-5L package. The value is given for SO and TSSOP packages.
7. Short-circuits from the output to VCC can cause excessive heating. The maximum output current is
approximately 48 mA, independent of the magnitude of VCC. Destructive dissipation can result from
simultaneous short-circuits on all amplifiers.
2/14
LMV321-LMV358-LMV324
Table 2.
Operating conditions
Symbol
VCC
Absolute maximum ratings and operating conditions
Parameter
Supply voltage
(1)
Value
Unit
2.7 to 6
V
Vicm
Common mode input voltage range
VDD -0.2 to VCC + 0.2
V
Vicm
Common mode input voltage range (2)
VDD to VCC
V
Toper
Operating free air temperature range
-40 to + 125
°C
1. At 25°C, for 2.7 ≤ VCC ≤ 6 V, Vicm is extended to VDD - 0.2 V, VCC + 0.2 V.
2. In full temperature range, both rails can be reached when VCC does not exceed 5.5 V.
3/14
Electrical characteristics
LMV321-LMV358-LMV324
2
Electrical characteristics
Table 3.
VCC = +2.7V, VDD = 0V, CL & RL connected to VCC/2, Tamb = 25°C (unless otherwise specified)
Symbol
Parameter
Vio
Input offset voltage
ΔVio
Input offset voltage drift
Conditions
Min.
Vicm = Vout = VCC/2
Tmin ≤ Tamb ≤ Tmax
Typ.
Max.
Unit
0.1
3
6
mV
2
(1)
µV/°C
Iio
Input offset current
Vicm = Vout = VCC/2
Tmin ≤ Tamb ≤ Tmax
Iib
Input bias current
Vicm = Vout = VCC/2(1)
Tmin ≤ Tamb ≤ Tmax
CMR
Common mode rejection ratio
0 ≤ Vicm ≤ VCC
55
85
dB
SVR
Supply voltage rejection ratio
Vicm = VCC/2
70
80
dB
Avd
Large signal voltage gain
Vout = 0.5V to 2.2V
RL = 10kΩ
RL = 2kΩ
80
70
100
88
dB
High level output voltage
Vid = 100mV
Tmin ≤ Tamb ≤ Tmax
RL = 10kΩ
RL = 2kΩ
2.6
2.55
2.65
2.6
Low level output voltage
Vid = -100mV
Tmin ≤ Tamb ≤ Tmax
RL = 10kΩ
RL = 2kΩ
Output current
Output source current
Vid = 100mV, VO = VDD
Output sink current
Vid = -100mV, VO = VCC
VOH
VOL
Io
1
9
25
nA
10
50
85
nA
15
50
5
46
5
46
V
90
100
mV
mA
Supply current (per amplifier)
Vout = VCC/2
AVCL = 1, no load
Tmin ≤ Tamb ≤ Tmax
Gain bandwidth product
RL = 10kΩ, CL = 100pF,
f = 100kHz
1
MHz
Slew rate
RL = 600Ω, CL = 100pF,
AV = 1
0.35
V/µs
φm
Phase margin
RL = 600Ω, CL = 100pF
44
Degrees
en
Input voltage noise
40
nV/√Hz
0.01
%
ICC
GBP
SR
THD
Total harmonic distortion
1. Maximum values include unavoidable inaccuracies of the industrial tests.
4/14
145
200
230
µA
LMV321-LMV358-LMV324
Table 4.
Electrical characteristics
VCC = +5V, VDD = 0V, CL & RL connected to VCC/2, Tamb = 25°C (unless otherwise specified)
Symbol
Parameter
Vio
Input offset voltage
ΔVio
Input offset voltage drift
Conditions
Min.
Vicm = Vout = VCC/2
Tmin ≤ Tamb ≤ Tmax
Typ.
Max.
Unit
0.1
3
6
mV
2
(1)
µV/°C
Iio
Input offset current
Vicm = Vout = VCC/2
Tmin ≤ Tamb ≤ Tmax
Iib
Input bias current
Vicm = Vout = VCC/2(1)
Tmin ≤ Tamb ≤ Tmax
CMR
Common mode rejection ratio
0 ≤ Vicm ≤ VCC
65
95
dB
SVR
Supply voltage rejection ratio
Vicm = VCC/2
70
90
dB
Avd
Large signal voltage gain
Vout = 0.5V to 4.5V
RL = 10kΩ
RL = 2kΩ
85
77
97
93
dB
High level output voltage
Vid = 100mV
Tmin ≤ Tamb ≤ Tmax
RL = 10kΩ
RL = 2kΩ
4.85
4.8
4.95
4.91
Low level output voltage
Vid = -100mV
Tmin ≤ Tamb ≤ Tmax
RL = 10kΩ
RL = 2kΩ
Output current
Output source current
Vid = 100mV, VO = VDD
Output sink current
Vid = -100mV, VO = VCC
VOH
VOL
Io
1
9
25
nA
16
63
95
nA
40
80
7
48
7
48
V
180
200
mV
mA
Supply current (per amplifier)
Vout = VCC/2
AVCL = 1, no load
Tmin ≤ Tamb ≤ Tmax
162
Gain bandwidth product
RL = 10kΩ, CL = 100pF,
f = 100kHz
1.3
MHz
Slew rate
RL = 600Ω, CL = 100pF,
AV = 1
0.45
V/µs
φm
Phase margin
RL = 600Ω, CL = 100pF
48
Degrees
en
Input voltage noise
40
nV/√Hz
0.01
%
ICC
GBP
SR
THD
Total harmonic distortion
220
250
µA
1. Maximum values include unavoidable inaccuracies of the industrial tests.
5/14
Electrical characteristics
Figure 1.
LMV321-LMV358-LMV324
Supply current/amplifier vs. supply Figure 2.
voltage
p
p
0
Input bias current (nA)
200
Supply Current (µA)
Input bias current vs. temperature
150
Tamb = 25°C
100
50
-4
-6
-8
-10
-12
-40 -20 0
0
0
2
4
6
Vcc = 3V
Vicm = 1.5V
-2
8
Input bias current vs. temperature
Vcc = 5V
Vicm = 2.5V
-4
-6
-8
-10
-12
-40 -20 0
20
40
Figure 4.
Common Mode Rejection (dB)
Input bias current (nA)
0
-2
60
110
Vcc = 3V
100
80 100 120 140
90
80
70
60
-50
0
Common mode rejection vs.
temperature
Figure 6.
150
Supply voltage rejection vs.
temperature
110
Supply Voltage Rejection (dB)
Common Mode Rejection (dB)
100
50
Temperature (°C)
110
Vcc = 5V
100
90
80
70
Vcc = 5V
Vicm = 2.5V
100
90
80
70
60
60
-40
0
-20
40
20
80
60
Temperature (°C)
6/14
80 100 120 140
Common mode rejection vs.
temperature
Temperature (°C)
Figure 5.
60
Temperature (°C)
Supply Voltage (V)
Figure 3.
40
20
-40
120
100
140
0
-20
40
20
80
60
Temperature (°C)
120
100
140
LMV321-LMV358-LMV324
Figure 7.
Electrical characteristics
Open loop gain vs. temperature
Figure 8.
110
110
Vcc = 3V
RL = 10 kohms
VCC = 5V
RL = 10 kohms
Open Loop Gain (dB)
Open Loop Gain (dB)
Open loop gain vs. temperature
100
RL = 2 kohms
90
80
70
100
RL = 2 kohms
90
80
70
-40
0
-20
40
20
80
120
60
100
-40
0
140
40
-20
Temperature (°C)
Figure 9.
Supply voltage rejection vs.
temperature
100
140
Figure 10. Output current vs. output voltage
80
sink
Vcc = 3V
Vicm = 1.5V
100
60
Output Current (mA)
Supply Voltage Rejection (dB)
120
60
Temperature (°C)
110
90
80
70
T = 25 °C
T = -40 °C
40
T = 125 °C
20
Vcc = 3V
Vid = 0.1V
Vicm = 1.5V
0
T = 125 °C
-20
T = -40 °C
-40
T = 25 °C
60
source
-60
-40
0
-20
40
20
80
120
60
100
0.0
140
Equivalent input noise vs Frequency
Equivalent Input Noise (nV/sqr(Hz))
T = 25 °C
60
T = 125 °C
T = -40 °C
20
Vcc = 5V
Vid = 0.1V
Vicm = 2.5V
0
T = -40 °C
-20
T = 25 °C
-40
source
T = 125 °C
-60
0.0
2.0
1.0
3.0
2.5
Figure 12. Noise versus frequency
80
40
2.0
1.5
Output Voltage (V)
Figure 11. Output current vs. output voltage
sink
1.0
0.5
Temperature (°C)
Output Current (mA)
80
20
4.0
3.0
Output Voltage (V)
5.0
50
40
30
20
10
VCC = 1.8V
gain = 100
Rs = 100 ohms
0
1E+1
1E+3
1E+2
1E+5
1E+4
Frequency (Hz)
7/14
Package information
3
LMV321-LMV358-LMV324
Package information
In order to meet environmental requirements, STMicroelectronics offers these devices in
ECOPACK® packages. These packages have a lead-free second level interconnect. The
category of second level interconnect is marked on the package and on the inner box label,
in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an STMicroelectronics
trademark. ECOPACK specifications are available at: www.st.com.
3.1
SOT23-5 package information
Figure 13. SOT23-5 package mechanical drawing
Table 5.
SOT23-5 package mechanical data
Dimensions
Ref.
Millimeters
Min.
Max.
Min.
Typ.
Max.
A
0.90
1.45
35.4
57.1
A1
0.00
0.15
0.00
5.9
A2
0.90
1.30
35.4
51.2
b
0.35
0.50
13.7
19.7
C
0.09
0.20
3.5
7.8
D
2.80
3.00
110.2
118.1
E
2.60
3.00
102.3
118.1
E1
1.50
1.75
59.0
68.8
e
0.95
37.4
e1
1.9
74.8
L
8/14
Typ.
Mils
0.35
0.55
13.7
21.6
LMV321-LMV358-LMV324
3.2
Package information
SO-8 package information
Figure 14. SO-8 package mechanical drawing
Table 6.
SO-8 package mechanical data
Dimensions
Ref.
Millimeters
Min.
Typ.
A
Inches
Max.
Min.
Typ.
1.75
0.069
A1
0.10
A2
1.25
b
0.28
0.48
0.011
0.019
c
0.17
0.23
0.007
0.010
D
4.80
4.90
5.00
0.189
0.193
0.197
E
5.80
6.00
6.20
0.228
0.236
0.244
E1
3.80
3.90
4.00
0.150
0.154
0.157
e
0.25
Max.
0.004
0.010
0.049
1.27
0.050
h
0.25
0.50
0.010
0.020
L
0.40
1.27
0.016
0.050
k
1°
8°
1°
8°
ccc
0.10
0.004
9/14
Package information
3.3
LMV321-LMV358-LMV324
TSSOP8 package information
Figure 15. TSSOP8 package mechanical drawing
Table 7.
TSSOP8 package mechanical data
Dimensions
Ref.
Millimeters
Min.
Typ.
A
Max.
Min.
Typ.
1.2
A1
0.05
A2
0.80
b
Max.
0.047
0.15
0.002
1.05
0.031
0.19
0.30
0.007
0.012
c
0.09
0.20
0.004
0.008
D
2.90
3.00
3.10
0.114
0.118
0.122
E
6.20
6.40
6.60
0.244
0.252
0.260
E1
4.30
4.40
4.50
0.169
0.173
0.177
e
10/14
Inches
1.00
0.65
k
0°
L
0.45
0.60
0.006
0.039
0.041
0.0256
8°
0°
0.75
0.018
8°
0.024
L1
1
0.039
aaa
0.1
0.004
0.030
LMV321-LMV358-LMV324
3.4
Package information
SO-14 package information
Figure 16. SO-14 package mechanical drawing
Table 8.
SO-14 package mechanical data
Dimensions
Ref.
Millimeters
Min.
Typ.
A
a1
Inches
Max.
Min.
Typ.
1.75
0.1
0.2
a2
Max.
0.068
0.003
0.007
1.65
0.064
b
0.35
0.46
0.013
0.018
b1
0.19
0.25
0.007
0.010
C
0.5
0.019
c1
45° (typ.)
D
8.55
8.75
0.336
0.344
E
5.8
6.2
0.228
0.244
e
1.27
0.050
e3
7.62
0.300
F
3.8
4.0
0.149
0.157
G
4.6
5.3
0.181
0.208
L
0.5
1.27
0.019
0.050
M
S
0.68
0.026
8° (max.)
11/14
Package information
3.5
LMV321-LMV358-LMV324
TSSOP14 package information
Figure 17. TSSOP14 package mechanical drawing
A
A2
A1
e
b
K
L
c
E
D
E1
PIN 1 IDENTIFICATION
1
Figure 18. TSSOP14 package mechanical data
Dimensions
Ref.
Millimeters
Min.
Typ.
A
Max.
Min.
Typ.
1.2
A1
0.05
A2
0.8
b
Max.
0.047
0.15
0.002
0.004
0.006
1.05
0.031
0.039
0.041
0.19
0.30
0.007
0.012
c
0.09
0.20
0.004
0.0089
D
4.9
5
5.1
0.193
0.197
0.201
E
6.2
6.4
6.6
0.244
0.252
0.260
E1
4.3
4.4
4.48
0.169
0.173
0.176
e
12/14
Inches
1
0.65 BSC
K
0°
L1
0.45
0.60
0.0256 BSC
8°
0°
0.75
0.018
8°
0.024
0.030
LMV321-LMV358-LMV324
Ordering information
4
Ordering information
Table 9.
Order codes
Order code
Temperature range
LMV321ILT
LMV321RILT
LMV321IYLT(1)
LMV321RIYLT
(1)
LMV358ID
LMV358IDT
LMV358IYD(1)
LMV358IYDT(1)
LMV358IPT
-40°C, +125 °C
LMV358IYPT(1)
LMV324ID
LMV324IDT
LMV324IYD(1)
LMV324IYDT(1)
LMV324IPT
LMV324IYPT(1)
Package
Packaging
Marking
SOT23-5
Tape & reel
SOT23-5
(Automotive grade)
Tape & reel
SO-8
Tube or
tape & reel
LMV358
SO-8
(Automotive grade)
Tube or
tape & reel
LMV358IY
TSSOP8
Tape & reel
MV358
TSSOP8
(Automotive grade)
Tape & reel
K181Y
SO-14
Tube or
tape & reel
LMV324
SO-14
(Automotive grade)
Tube or
tape & reel
V324Y
TSSOP14
Tape & reel
MV324
TSSOP14
(Automotive grade)
Tape & reel
V324IY
K177
K176
K180
K185
1. Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC
Q001 & Q 002 or equivalent are on-going.
5
Revision history
Table 10.
Document revision history
Date
Revision
Changes
1-Dec-2005
1
First release - Products in full production.
25-May-2007
2
Added automotive grade part numbers to order codes table. Moved order
codes table to Section 4 on page 13.
20-Feb-2008
3
Added Figure 12: Noise versus frequency on page 7.
Updated presentation of package information.
Corrected footnote for automotive grade part numbers in order codes table.
13/14
LMV321-LMV358-LMV324
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2008 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
14/14
Similar pages