General Purpose Relays Miniature Power Relay LN / LNH I 1 pole 10 A / 16 A, 1 CO or 1 NO contact I High performance 10 A version (LN1) I 16 A High capacity version available (LN3) I Version for HOT-applications (LNH) I Flux proof I Plastic materials according to IEC60335-1 (domestic appliances) I RoHS compliant (Directive 2002/95/EC) as per product date code 0424 Applications F0278-A Domestic appliances Approvals V REG.-Nr. 40004596, Z E214025 Technical data of approved types on request Contact data LN1 LN3 LNH Contact configuration Contact set Type of interruption Rated current Rated voltage / max.switching voltage AC Maximum breaking capacity AC Limiting making capacity, max 4 s, df 10% Contact material 1 CO or 1 NO 1 CO or 1 NO 1 CO or 1 NO single contact micro-disconnection 10 A 16 A1) 10 A 240/400 VAC 240/400 VAC 240/400 VAC 2500 VA 4000 VA 2500 VA 35 A 35 A 35 A AgSnO2 AgSnO2 AgSnO2 (AgCdO) Mechanical endurance 10x106 cycles Rated frequency of operation with / without load 30/300 min-1 Contact ratings Type Load LN1 10 A, 250V, 85 °C, resistive, EN61810-1 LN3 16 A, 250V, 85 °C, resistive, EN61810-1 LNH NO 10 A, 250V, 105 °C, resistive, EN61810-1 LNH NO 8 A, 250V, 105 °C, resistive, EN61810-1 1) For 16 A at 85°C: coil power reduction to 50% necessary For 16A with 100% coil power: max. ambient temperature 75°C For 100% coil power at 85°C: max. contact current 15A Coil data LN1 Rated coil voltage range DC coil 6...48 VDC Coil power DC coil typ. 400 mW Operative range 2 Operative voltage range, % of rated coil voltage Coil insulation system according UL1446 class F Cycles 250x103 50x103 1) 200x103 250x103 LN3 LNH 6...48 VDC typ. 400 mW 2 6...48 VDC typ. 400 mW class F 90 - 110% class F Coil versions, DC-coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ohm mW 006 6 4.2 0.6 90+10% 400 009 9 6.3 0.9 202+10% 401 012 12 8.4 1.2 360+10% 400 024 24 16.8 2.4 1440+10% 400 036 36 25.2 3.6 3240+10% 400 048 48 33.6 4.8 5760+10% 400 All figures are given for coil without preenergization, at ambient temperature +23°C Other coil voltages on request 1 Datasheet Rev. EK1 Issued 2005/11 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. General Purpose Relays Miniature Power Relay LN / LNH (Continued) Insulation LN1 Dielectric strength coil-contact circuit open contact circuit Clearance / creepage coil-contact circuit Material group of insulation parts Tracking index of relay base Insulation to IEC 60664-1 Type of insulation coil-contact circuit open contact circuit Rated insulation voltage Pollution degree Rated voltage system Overvoltage category Other data LN3 LNH PCB layout / terminal assignment Bottom view on solder pins 2000 Vrms 1000 Vrms W 2,5/2,5 mm IIIa CTI 325 basic functional 250 V 2 240 V II LN1 S0260-AN LN3 LNH RoHS - Directive 2002/95/EC compliant per product date code 0424 Flammability class according to UL94 V-0 V-0 V-0 For WG version: GWFI to IEC 60695-2-12 850°C 850°C 850°C GWIT to IEC 60695-2-13 775°C 775°C 775°C Ambient temperature range -40...85°C -40...75 (85)°C -40...105°C Operate- / release time typ. 10/5 ms Vibration resistance (function), NO / NC contact >14 / 8 g, 30...400 Hz Shock resistance (destruction) 100 g Category of protection RTII - flux proof Mounting PCB Resistance to soldering heat flux proof 270°C / 10 s Relay weight 12 g Packaging unit 25/1000 pcs S0260-AB S0260-AC Dimensions S0486-A 2 Datasheet Rev. EK1 Issued 2005/11 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. General Purpose Relays Miniature Power Relay LN / LNH (Continued) Product key L N Type Version 1 10 A, 85°C H 10 A, 105°C Contact configuration 1 1 CO contact Contact material 0 AgCdO Coil 006 6 VDC 009 9 VDC 012 12 VDC Product key LN133006 LN133009 LN133012 LN133024 LN133036 LN133048 LN113006 LN113009 LN113012 LN113024 LN113036 LN113048 LNH33006 LNH33009 LNH33012 LNH33024 LNH33036 LNH33048 LNH13006 LNH13009 LNH13012 LNH13024 LNH13036 LNH13048 3 16 A, 85°C 3 1 NO contatct 3 AgSnO2 024 036 Version LN1 10 A 85°C 24 VDC 36 VDC Cont. material AgSnO2 Cont.configuration 1 NO contact 1 CO contact LNH 10 A 105°C 1 NO contact 1 CO contact Coil 6 VDC 9 VDC 12 VDC 24 VDC 36 VDC 48 VDC 6 VDC 9 VDC 12 VDC 24 VDC 36 VDC 48 VDC 6 VDC 9 VDC 12 VDC 24 VDC 36 VDC 48 VDC 6 VDC 9 VDC 12 VDC 24 VDC 36 VDC 48 VDC Part number 0-1721249-1 0-1721249-2 0-1721249-3 0-1721249-4 0-1721249-5 0-1721249-6 0-1721249-7 0-1721249-8 0-1721249-9 1-1721249-0 1-1721249-2 1-1721249-3 0-1721253-2 0-1721253-3 0-1721253-4 0-1721253-5 0-1721253-6 0-1721253-7 0-1721253-9 1-1721253-0 1-1721253-1 1-1721253-2 1-1721253-3 1-1721253-4 3 Datasheet Rev. EK1 Issued 2005/11 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change.