05122 LP05C Only One Name Means ProTek’Tion™ STANDARD CAPACITANCE TVS ARRAY APPLICATIONS ✔ USB Port Protection ✔ Cellular Phones ✔ Control & Monitoring Systems ✔ Portable Electronics ✔ Wireless Bus Protection IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns SOT-23 FEATURES ✔ ESD Protection > 40 kilovolts ✔ Low Clamping Voltage ✔ RoHS Compliant in Lead-Free Versions MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SOT-23 ✔ Weight 8 milligrams (Approximate) ✔ Available in Tin-Lead or Lead-Free Pure-Tin Plating(Annealed) ✔ Solder Reflow Temperature: Tin-Lead - Sn/Pb, 85/15: 240-245°C Pure-Tin - Sn, 100: 260-270°C ✔ Flammability rating UL 94V-0 ✔ 8mm Tape and Reel Per EIA Standard 481 ✔ Device Marking: Marking Code PIN CONFIGURATION 1 3 2 05122.R1 4/05 1 www.protekdevices.com LP05C DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Operating Temperature Storage Temperature SYMBOL VALUE UNITS TJ -55°C to 150°C °C TSTG -55°C to 150°C °C ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER LP05C DEVICE MARKING LP5 MINIMUM BREAKDOWN VOLTAGE (See Note 2) @ 10mA (Negative) V(BR) VOLTS TYPICAL CLAMPING VOLTAGE (See Note 1) ESD = 8kV (Positive) VC VOLTS TYPICAL CLAMPING VOLTAGE (See Note 2) ESD = 8kV (Negative) VC VOLTS MAXIMUM LEAKAGE CURRENT (See Note 1) TYPICAL CAPACITANCE VWM VOLTS MINIMUM BREAKDOWN VOLTAGE (See Note 1) @ 10mA (Positive) V(BR) VOLTS @VWM ID µA 2.5V @ 1 MHz Cj pF 5.5 5.6 -1.2 12 -8 10 30 RATED STAND-OFF VOLTAGE Note 1: Pins 3 to 1 and 3 to 2. Note 2: Pins 1 to 3 and 2 to 3. 05122.R1 4/05 2 www.protekdevices.com LP05C PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE SOT-23 A L 0º - 10º 3 B 1 S PACKAGE DIMENSIONS 2 K J DIM V A B C D G H J K L S V G C D H MILLIMETERS MIN MAX 2.80 1.20 0.89 0.37 1.78 0.013 0.085 0.45 0.89 2.10 0.45 3.04 1.40 1.11 0.50 2.04 0.100 0.177 0.60 1.02 2.50 0.60 INCHES MIN MAX 0.1102 0.0472 0.0350 0.0150 0.0701 0.0005 0.0034 0.0180 0.0350 0.0830 0.0177 0.1197 0.0551 0.0440 0.0200 0.0807 0.0040 0.0070 0.0236 0.0401 0.0984 0.0236 NOTES MOUNTING PAD 1. Dimensioning and tolerances per ANSI Y14.5M, 1985. 2. Controlling Dimension: Inches 3. Pin 3 is the cathode (Unidirectional Only). 4. Dimensions are exclusive of mold flash and metal burrs. 0.037” (0.95mm) TAPE & REEL ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix -T7 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e., LP05C-T7. 3. Suffix -T13 = 13 Inch Reel - 10,000 pieces per 8mm tape, i.e., LP05C-T13. 4. Suffix - LF = Lead-Free, Pure Tin Plating, i.e., LP05C-LF-T7. 0.079” (2.00mm) 0.033” (0.85mm) 0.033” (0.85mm) Outline & Dimensions: Rev 1 - 11/01, 06012 COPYRIGHT © ProTek Devices 2005 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05122.R1 4/05 3 www.protekdevices.com