Cree® P4 LED Model # LP476PBL1-90G-03 Data Sheet 90-degree, 7.6 x 7.6 LED lamp in blue color with water-transparent lens and stopper Applications • • • Advertising Signs Indicators Message Boards Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Unit IF 30 mA IFP 100 mA Reverse Voltage VR 5 V Power Dissipation PD 132 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Lead Soldering Temperature Tsol Forward Current Peak Forward Current Note Max. 260°C for 3 sec. max. (3 mm from the base of the epoxy bulb) Note: Pulse width ≤0.1 msec, duty ≤1/10. Typical Electrical & Optical Characteristics (TA = 25°C) Characteristics Symbol Condition Unit Forward Voltage VF IF = 30 mA V Reverse Current IR VR = 5 V μA Dominant Wavelength λD IF = 30 mA nm 462 470 Luminous Intensity IV IF = 30 mA mcd 390 600 2θ½H-H IF = 30 mA deg 90 2θ½V-V IF = 30 mA deg 35 Typical Maximum 3.6 4.4 100 475 D-CT121.000 Data Sheet: CL 50% Power Angle Minimum Subject to change without notice. www.cree.com/ledlamps Standard Bins for LP476PBL1-90G-03 (IF = 30 mA) Lamps are sorted to luminous intensity (IV ), VF and dominant wavelength (λD) bins shown. Orders for LP476PBL1-90G-03 may be filled with any or all bins contained as below. All luminous intensity (IV ), VF and dominant wavelength (λD) values shown and specified are at IF = 30 mA. Luminous Intensity (IV) X3 X4 X5 T or above 1100 mcd S 770 mcd R 550 mcd Q 390 mcd 460 nm 465 nm 470 nm 475 nm Dominant Wavelength (λD) Forward Voltage (VF) Rank Voltage V7 V8 V9 V10 V11 V12 V13 V14 2.8-3.0 V 3.0-3.2 V 3.2-3.4 V 3.4-3.6 V 3.6-3.8 V 3.8-4.0 V 4.0-4.2 V 4.2-4.4 V Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is ±15%. 3. Tolerance of measurement of dominant wavelength is ±1 nm. 4. Tolerance of measurement of VF is ±0.05 V. 5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document. 6. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT121.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Document No. SPE/LP476PBL1-90G-03 Rev. No. 02 Graphs Graphs -50 If (mA) 100.0 -30 -40 -10 -20 0 0.0 Vr(V) 80.0 -10.0 60.0 -20.0 40.0 -30.0 -40.0 20.0 0.0 3.0 Vf(V) 3.4 3.8 4.2 Ir(uA) 5.0 4.6 FIG.1 FORWARD CURRENT VS. -50.0 FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. FORWARD VOLTAGE. Half Power WL=28nm Domi WL= 470nm 2.5 2.0 100% 1.5 75% 1.0 50% 0.5 25% 0.0 0.0 If(mA) 20.0 40.0 60.0 0% 300 80.0 100.0 FIG.3 RELATIVE LUMINOUS INTENSITY VS. 400 500 600 WL(nm) 700 FIG.4 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT WAVELENGTH. H-H : 90 V-V : 35 50% Power Angle : IF(mA) 50 H-H V-V 40 0 100% 80% 30 60% 20 40% 10 0 20% Ta( C) 0 20 40 60 80 100 -90 120 FIG.5 MAXIMUM FORWARD DC CURRENT VS AMBIENT TEMPERATURE (Tjmax=120 C) Items Signatures Date Prepared by LiuZM 2005-07-07 Rev. No Checked by Aldosin 2005-07-07 02 Approved by David 2005-07-07 FCN# -60 -30 0 30 60 90 0% FIG.6 FAR FIELD PATTERN Revision History Date Change Description 2005-07-07 Release. IV(typ)650 to 600mcd FCN20050221 Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco International Ltd. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 4/4 CLD-CT121.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Format #: COTCO-D-074 REV.4 Mechanical Dimensions Document No. SPE/LP476PBL1-90G-03 Rev. No. 02 All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted. An epoxy meniscus may extend about 1.5 mm down the leads. Dimension Drawing Burr around bottom of epoxy may be 0.5 mm max. e maximum Unit ating 30 mA 100 mA 5 V 132 mW ~ +100 °C ~ +100 °C 0°C for 3 sec Max. Notes he base of the epoxy bulb) RoHS Compliance cs ( The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the = 25 limits) Tathreshold ) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. °C Vision Advisory Claim Condition Min. Typ. Max. Unit IF = 30mA --- 3.6 4.4 V Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. VR = 5V --- CLD-CT121.000 --- 100 PA Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color 1: Full-color distribution 2~9, A~Z . . . : special request * aaaaaaaaa-aaa-aa- x x x x x IV 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * Packing type 0: Standard = tube pack 1~9, A~Z . . . : special request * Product P/N * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number LP476PBL1-90G-03-00001 Description P4 90 Blue 470nm, FULL RANK, Tube Pack * Please contact your Cree representative about the availability of non-standard kits. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT121.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps