Document 436-1 Shielded Power Inductors – LPS3015 • Very low DCR; excellent current handling • Miniature 3.0 × 3.0 mm footprint; less than 1.5 mm tall Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Environmental RoHS compliant, halogen free Terminations RoHS compliant matte tin over nickel over silver. Other terminations available at additional cost. Weight 40 – 45 mg Ambient temperature –40°C to +85°C with (40°C rise) Irms current. Maximum part temperature +125°C (ambient + temp rise). Derating. Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1000/7″ reel; 3500/13″ reel; Plastic tape: 12 mm wide, 0.26 mm thick, 8 mm pocket spacing, 1.65 mm pocket depth Recommended pick and place nozzle OD: 3 mm; ID: ≤ 1.5 mm PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. Isat (A)5 Irms (A)6 DCR SRF Inductance2 max3 typ4 10% 20% 30% 20°C 40°C Part number1 ±20% (µH) (Ohms) (MHz) drop drop drop rise rise LPS3015-102MR_ 1.0 LPS3015-152MR_ 1.5 LPS3015-182MR_ 1.8 LPS3015-222MR_ 2.2 LPS3015-332MR_ 3.3 0.075 0.100 0.100 0.110 0.130 190 140 135 110 90 2.4 2.2 2.1 2.0 1.4 2.4 2.2 2.1 2.1 1.5 2.5 2.3 2.3 2.1 1.5 1.4 1.3 1.1 1.1 1.0 2.0 1.7 1.4 1.4 1.4 LPS3015-472MR_ 4.7 LPS3015-682MR_ 6.8 LPS3015-103MR_ 10 LPS3015-153MR_ 15 LPS3015-183MR_ 18 0.200 0.300 0.440 0.700 0.750 79 58 48 35 33 1.1 0.83 0.60 0.58 0.56 1.2 0.86 0.69 0.61 0.58 1.2 0.89 0.73 0.62 0.59 0.90 0.68 0.55 0.44 0.43 1.2 0.90 0.75 0.59 0.58 LPS3015-223MR_ 22 LPS3015-333MR_ 33 LPS3015-473MR_ 47 LPS3015-683MR_ 68 LPS3015-104MR_ 100 0.825 1.30 1.55 2.35 3.40 30 23 17 14 11 0.48 0.39 0.36 0.29 0.24 0.49 0.41 0.38 0.30 0.25 0.50 0.42 0.39 0.31 0.26 0.42 0.35 0.30 0.25 0.19 0.57 0.48 0.40 0.33 0.26 LPS3015-124MR_ LPS3015-154MR_ LPS3015-184MR_ LPS3015-224MR_ 4.65 6.25 8.60 9.50 0.21 0.19 0.16 0.15 0.22 0.20 0.17 0.16 0.22 0.20 0.17 0.16 0.17 0.15 0.13 0.11 0.23 0.20 0.175 0.155 120 150 180 220 9.0 8.0 7.5 6.0 1. Please specify termination and packaging codes: LPS3015-333MRC Termination: R = RoHS compliant matte tin over nickel over silver. Special order, added cost: Q = RoHS tin-silver-copper (95.5/4/0.5) or P = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (3500 per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. Inductance at 1 MHz is the same for parts with SRF ≥10 MHz. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 8753ES or equivalent. 5. DC current at 25°C that causes the specified inductance drop from its value without current. Click for temperature derating information. 6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Coilcraft Designer’s Kit C392 contains samples of 0.80 µH to 33 µH parts (3 each) from LPS3008, LPS3010 and LPS3015. Kit C401 contains samples of 0.56 µH to 33 µH parts (3 each) from LPS4012 and LPS4018. Kit C402 contains samples of 220 µH to 3300 µH parts (3 each) from all five series. For details of kit contents and to order, contact Coilcraft or visit http://order.coilcraft.com. US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 436-1 Revised 09/02/15 © Coilcraft Inc. 2016 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 436-2 Shielded Power Inductors – LPS3015 Series Typical L vs Frequency Typical L vs Current 100 100 10 Inductance (µH) Inductance (µH) 33 µH 22 µH 10 µH 4.7 µH 3.3 µH 2.2 µH 1 0.1 1.0 µH 33 µH 22 µH 10 10 µH 4.7 µH 3.3 µH 2.2 µH 1 1.0 µH 0.1 0.01 0.1 1 Frequency (MHz) 10 0.01 0.1 Current (A) 1 10 Packaging 1000/7″ reel; 3500/13″ reel; Plastic tape: 12 mm wide, 0.26 mm thick, 8 mm pocket spacing, 1.65 mm pocket depth NOTE NEW PART ORIENTATION Parts are rotated 90° in the packaging tape compared to previous versions of this product. NEW 123 123 123 Dimensions are in OLD 123 123 123 inches mm US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 436-1 Revised 09/02/15 © Coilcraft Inc. 2016 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.