MURATA LQH2MCN560K02p

Inductors (Coils) > Chip Inductor (Chip Coil) > Power Inductor (Wire Wound Type)
Data Sheet
Chip Inductor (Chip Coil)
1
Power Inductor (Wire Wound Type)
LQH2MC_02 Series (0806 Size)
■ Packaging
0.90±0.05
■ Dimensions
2.0±0.2
Code
Packaging
Minimum Quantity
L
180mm Embossed Tape
3000
B
Bulk(Bag)
100
1.6±0.2
0.6±0.2 0.8±0.2 0.6±0.2
(in mm)
■ Rated Value (p: packaging code)
Inductance
Rated Current
(Based on Inductance Change)
Rated Current
(Based on Temperature Rise)
DC Resistance
Self Resonance
Frequency (min.)
LQH2MCN1R0M02p
1.0µH±20%
-
485mA
0.30ohm±30%
100MHz
LQH2MCN1R5M02p
1.5µH±20%
-
445mA
0.40ohm±30%
95MHz
LQH2MCN2R2M02p
2.2µH±20%
-
425mA
0.48ohm±30%
70MHz
LQH2MCN3R3M02p
3.3µH±20%
-
375mA
0.60ohm±30%
65MHz
LQH2MCN4R7M02p
4.7µH±20%
-
300mA
0.8ohm±30%
60MHz
LQH2MCN5R6M02p
5.6µH±20%
-
280mA
0.9ohm±30%
60MHz
LQH2MCN6R8M02p
6.8µH±20%
-
255mA
1.0ohm±30%
55MHz
LQH2MCN8R2M02p
8.2µH±20%
-
235mA
1.1ohm±30%
50MHz
LQH2MCN100K02p
10µH±10%
-
225mA
1.2ohm±30%
48MHz
LQH2MCN120K02p
12µH±10%
-
210mA
1.4ohm±30%
44MHz
LQH2MCN150K02p
15µH±10%
-
200mA
1.6ohm±30%
40MHz
LQH2MCN180K02p
18µH±10%
-
190mA
1.8ohm±30%
35MHz
LQH2MCN220K02p
22µH±10%
-
185mA
2.1ohm±30%
30MHz
LQH2MCN270K02p
27µH±10%
-
180mA
2.5ohm±30%
30MHz
LQH2MCN330K02p
33µH±10%
-
160mA
2.8ohm±30%
28MHz
LQH2MCN390K02p
39µH±10%
-
125mA
4.4ohm±30%
24MHz
LQH2MCN470K02p
47µH±10%
-
120mA
5.1ohm±30%
18MHz
LQH2MCN560K02p
56µH±10%
-
110mA
5.7ohm±30%
17MHz
LQH2MCN680K02p
68µH±10%
-
100mA
6.6ohm±30%
14MHz
LQH2MCN820K02p
82µH±10%
-
90mA
7.5ohm±30%
14MHz
Part Number
Test Frequency: 1MHz
Class of Magnetic Shield: No magnetic shield
Operating Temperature Range (Self-temperature rise is not included): -40°C to +85°C
Only for reflow soldering.
Continued on the following page.
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.9.9
http://www.murata.com/
Inductors (Coils) > Chip Inductor (Chip Coil) > Power Inductor (Wire Wound Type)
Data Sheet
2
Continued from the preceding page.
■ Notice (Rated Current)
<Rated Current>
(Based on Temperature Rise)
When Rated Current is applied to the Products,
self-generation of heat will rise to 40°C or less.
■ Inductance-Frequency Characteristics (Typ.)
■ Inductance-Current Characteristics (Typ.)
1000
1000
82µH
47µH
100
100
82µH
47µH
Inductance (µH)
Inductance (µH)
22µH
10µH
4.7µH
10
1.0µH
22µH
10µH
10
4.7µH
1.0µH
1
1
0.1
0.1
1
10
Frequency (MHz)
100
0.1
10
1000
100
Current (mA)
1000
■ Temperature Rise Characteristics (Typ.)
50
47µH
10µH
4.7µH
2.2µH
1.0µH
Temperature Rise (°C)
40
30
20
10
0
0
200
400
Current (mA)
600
800
■ !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.9.9
http://www.murata.com/