Inductors (Coils) > Chip Inductor (Chip Coil) > Power Inductor (Wire Wound Type) Data Sheet 1 Chip Inductor (Chip Coil) Power Inductor (Wire Wound Type) LQH5BP_T0 Series (2020 Size) c Dimensions c Packaging Code Packaging Minimum Quantity L 180mm Embossed Tape 500 K 330mm Embossed Tape 3000 (0.2) 2.0±0.2 5.0±0.2 5.0±0.2 5.0±0.2 1.5±0.2 1.5±0.2 (in mm) c Rated Value (p: packaging code) Part Number Inductance Rated Current (Based on Inductance Change) Rated Current (Based on Temperature Rise) DC Resistance Self Resonance Frequency (min.) LQH5BPNR47NT0p 0.47µH ±30% 7.7A 4.0A 0.012ohm ±20% 220MHz LQH5BPN1R0NT0p 1.0µH ±30% 5.8A 3.1A 0.019ohm ±20% 90MHz LQH5BPN1R2NT0p 1.2µH ±30% 5.4A 3.1A 0.019ohm ±20% 90MHz LQH5BPN1R5NT0p 1.5µH ±30% 5.0A 3.0A 0.024ohm ±20% 70MHz LQH5BPN2R2NT0p 2.2µH ±30% 4.0A 2.6A 0.030ohm ±20% 55MHz LQH5BPN2R7NT0p 2.7µH ±30% 3.8A 2.5A 0.035ohm ±20% 50MHz LQH5BPN3R3NT0p 3.3µH ±30% 3.5A 2.3A 0.044ohm ±20% 40MHz LQH5BPN4R7NT0p 4.7µH ±30% 3.0A 2.0A 0.058ohm ±20% 40MHz LQH5BPN6R8NT0p 6.8µH ±30% 2.5A 1.65A 0.083ohm ±20% 30MHz LQH5BPN100MT0p 10µH ±20% 2.0A 1.60A 0.106ohm ±20% 25MHz LQH5BPN150MT0p 15µH ±20% 1.6A 1.20A 0.187ohm ±20% 18MHz LQH5BPN220MT0p 22µH ±20% 1.4A 1.05A 0.259ohm ±20% 15MHz Test Frequency: 100kHz Class of Magnetic Shield: Magnetic shield of magnetic powder in resin Operating Temperature Range (Self-temperature rise is included): -40 to +125°C Operating Temperature Range (Self-temperature rise is not included): -40 to +85°C Only for reflow soldering. c Notice (Rated Current) When Rated Current is applied to the Products, Inductance will be within ±30% of nominal Inductance value. When Rated Current is applied to the Products, self-generation of heat will rise to 40°C or less. Continued on the following page. oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2011.11.2 http://www.murata.com/ Inductors (Coils) > Chip Inductor (Chip Coil) > Power Inductor (Wire Wound Type) Data Sheet 2 Continued from the preceding page. c Inductance-Frequency Characteristics (Typ.) c Inductance-Current Characteristics (Typ.) 10 10 3.3μH 2.7μH 2.2μH 1.5μH 3.3μH 2.2μH Inductance (μH) Inductance (μH) 2.7μH 1.5μH 1.0μH/1.2μH 1 0.47μH 0.1 0.1 1.0μH/1.2μH 1 0.47μH 0.1 1 10 100 1 Frequency (MHz) 10 100 Current (mA) 1000 10000 c Temperature Rise Characteristics (Typ.) 40 2.7μH 2.2μH Temperature Rise (°C) 30 3.3μH 1.5μH 1.0μH/1.2μH 0.47μH 20 10 0 0 1000 2000 3000 Current (mA) 4000 5000 c !Caution/Notice !Caution (Rating) Do not use products beyond the rated current as this may create excessive heat. Notice Solderability of Tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chip before use. oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2011.11.2 http://www.murata.com/