PL IA NT CO M *R oH S Features Applications ■ Fast switching ■ LED streetlights ■ Automatic reset ■ LCD backlighting ■ SMB package ■ Display lighting ■ Suitable for industrial lighting environments ■ Intrinsically safe lighting ■ RoHS compliant* LSP Series LED Shunt Protector General Information Bourns® LSP Series protectors are electronic shunts that provide a current bypass when an LED element in an LED string fails open circuit. This ensures the remaining string of LEDs will continue to function. There are many cases where high reliability of the LED lighting must be maintained, such as LCD backlighting, transport lighting, avionics, intrinsically safe and low maintenance lighting. Anode LSPxx00 Control Circuit The LSP Series is available in surface mount package DO-214AA (SMB) size format. Cathode Absolute Maximum Ratings (@ TA = 25 °C Unless Otherwise Noted) Rating LSP0600 LSP0900 LSP1300 LSP1800 Repetitive peak off-state voltage Symbol Value Unit VDRM 6 9 13 18 V Average on-state current (Note 1) IT 350 mA Operating junction temperature TJ -40 to +150 °C Storage temperature Ts -65 to +150 °C 260 °C Lead temperature, soldering (10 s) Notes: 1. Using 75 mm x 75 mm 4-Layer PCB (EIA/JESD51-7), IT = 1.0 A Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Test Conditions IDRM Repetitive peak off-state current VD = VDRM Min. V(BO) Breakover voltage dv/dt = 750 V/ms, RSOURCE = 300 IH Holding current IT = 1 A, di/dt = 30 mA/ms IBO Breakover current di/dt = 0.8 A/ms 75 mA VT On-state voltage IT = 1 A 1.2 V Max. Unit LSP0600 LSP0900 LSP1300 LSP1800 Nom. 6 9 13 18 5 Max. Unit 10 µA 16 18 26 33 V 30 mA Thermal Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Test Conditions Junction to free air thermal resistance EIA/JESD51-3 PCB, IT= 350 mA, TA= 25 °C 170 °C/W Junction to free air thermal resistance EIA/JESD51-7, 75 mm x 75 mm 4-Layer PCB, IT = 1.0 A, TA= 25 °C 90 °C/W JANUARY 2011 *RoHS Directive 2002/95/EC Jan 27, 2003 including Annex. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Min. Nom. LSP Series LED Shunt Protector V-I Characteristic On-state Voltage vs. Junction Temperature +i 1.05 VT IT I(BO) IH IDRM ID -v VD +v VDRM On-State Voltage (V) 1.00 V(BO) 0.95 0.90 0.85 Characteristics not defined in this quadrant. 0.80 25 75 100 125 TJ - Junction Temperature (°C) -i Normalized Breakover Voltage vs. Junction Temperature 1.06 Normalized Breakover Voltage (V) 50 Typical Application DC Supply 1.05 Current Source 1.04 1.03 LED1 1.02 LSP0600 Control Circuit 1.01 1.00 LED2 0.99 LSP0600 Control Circuit 0.98 25 50 75 100 125 150 TJ - Junction Temperature (°C) LSP0600 Control Circuit LEDn LSP0600 Control Circuit JANUARY 2011 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 150 LSP Series LED Shunt Protector Product Specifications Typical Part Marking Top Side Marking LSP0600BJR-S ....................................................................LSP060 LSP0900BJR-S ....................................................................LSP090 LSP1300BJR-S ....................................................................LSP130 LSP1800BJR-S ....................................................................LSP180 K A How to Order LSP 0600 BJ R - S Model Series LED Shunt Protector Cathode Bar Unit ................................... Epoxy molded SMB D0-214AA package Mold Material.......................................................................UL94V-0 Terminations ....................100 % matte tin-plated over copper alloy Unit Weight .......................................................................... 102 mg. Off-State Voltage 0600 = 6 V 0900 = 9 V 1300 = 13 V 1800 = 18 V Package BJ = SMB DO-214AA Package Standard Packaging R = Tape and Reel Packaging (3,000 pcs./reel) Packaging Specifications Standard ........................................................................... EIA-481-1 Tape Width ..............................................................12 mm (.472 in.) Reel Diameter ......................................................330 mm (12.99 in.) Part Alignment .....................Cathode bar adjacent to sprocket hole Quantity per Reel.......................................................... 3,000 pieces Termination S = Pb Free Termination (RoHS Compliant) Asia-Pacific: Tel: +886-2 2562-4117 • Fax: +886-2 2562-4116 Europe: Tel: +41-41 768 5555 • Fax: +41-41 768 5510 The Americas: Tel: +1-951 781-5500 • Fax: +1-951 781-5700 www.bourns.com JANUARY 2011 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. BOURNS® THYRISTOR SURGE PROTECTOR PRODUCTS PACKAGE MECHANICAL INFORMATION SMB (DO-214AA) Package Outline Dimensions This surface mount two terminal package consists of a circuit mounted on a lead frame and encapsulated within a plastic compound. The compound is designed to withstand normal soldering temperatures with no deformation and circuit performance characteristics will remain stable when operated in most high humidity conditions. Terminals require no additional cleaning or processing when used in soldered assembly. SMB (DO-214AA) Package 4.06 - 4.57 (.160 - .180) 3.30 - 3.94 (.130 - .155) Index Mark (if needed) 2.00 - 2.40 (.079 - .094) 1.90 - 2.10 (.075 - .083) 0.76 - 1.52 (.030 - .060) 5.21 - 5.59 (.205 - .220) 0.10 - 0.20 (.004 - .008) 1.96 - 2.32 (.077 - .091) DIMENSIONS ARE : MILLIMETERS (INCHES) MD-SMB-001-a AUGUST 2003 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 1 SMB (DO-214AA) Tape Dimensions SMB (DO-214AA) Package Single-Sprocket Tape 3.90-4.10 (.154-.161) DIA. 1.95-2.05 (.077-.081) 1.50 MIN. (.059) DIA. 1.55-1.65 (.061-.065) 0.40 MAX. (.016) 1.65-1.85 (.065-.073) 5.45-5.55 (.215-.219) 7.90-8.10 (.311-.319) Direction of Feed Index Mark (if needed) 11.70-12.30 (.461-.484) 8.20 MAX. (.323) 0 MIN. Cover Tape Carrier Tape Embossment 20° 4.50 MAX. (.177) Maximum component rotation Typical component cavity center line DIMENSIONS ARE : MILLIMETERS (INCHES) Typical component center line MD-SMB-002-a NOTES: A. The clearance between the component and the cavity must be within 0.05 mm (.002 in) MIN. to 0.65 mm (.026 in) MAX. so that the component cannot rotate more than 20 ° within the determined cavity. B. Taped devices are supplied on a reel of the following dimensions:Reel diameter: 330 mm ±3.0 mm (12.99 in ±.118 in) Reel hub diameter: 75 mm (2.95 in) MIN. Reel axial hole: 13.0 mm ±0.5 mm (.512 in ±.020 in) C. 3000 devices are on a reel. 2 AUGUST 2003 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SMB (DO-214AA) Recommended Printed Wiring Land Pattern Dimensions SMB (DO-214AA) Land Pattern 2.54 (.100) 2.40 (.095) 2.16 (.085) DIMENSIONS ARE: MILLIMETERS (INCHES) MD-SMB-003-a AUGUST 2003 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 3