Micro-D Connectors 240-030 Micro-D Filter Connectors Solder Cup Micro-D Solder Cup Basic Part Number Filter Connector Product Code Contact Type P - Pin S - Socket Shell Finish (See Table I) 240 - 030 - 2 - 25 P Number of Contacts 9, 15, 21, 25, 31, 37 Filter Class A, B, C, D, E, F or G (See Table III) P B Filter Type P - Pi Circuit C - C Circuit P Hardware (See Table II) A B PI FILTER .800 (20.32) MAX. C FILTER .500 .600 (12.70) (15.24) MAX. C D E F D .096/.088 (2.43/2.23) DIA. .093 ± .005 (2.36 ± 0.13) .125 (3.18) MAX, H .287 (7.3) .322 (8.18) Max Glenair’s Filtered Solder Cup Micro-D's provide EMI solutions in a miniaturized M83513 type connector. These connectors feature ceramic capacitor planar arrays and ferrite inductors. Solder cups accept #26 thru #30 AWG wire, or specify oversize contacts for #24 gage wire. Choose Pi or C Filter Arrays in seven filter classes and eight layouts. Glenair filtered Micro-D connectors comply with applicable MIL-DTL-83513 requirements and are 100% intermateable with standard connectors. Choose 9 to 67 Contacts, with standard cadmium or nickel plating on the connector housing or choose optional finishes such as gold or chem film. © 2008 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] D-6 www.glenair.com Micro-D Connectors 240-030 Micro-D Filter Connectors Solder Cup TABLE lll: CAPACITOR ARRAY CODE CAPACITANCE RANGE TABLE I: SHELL FINISH SYM MATERIAL 1 Aluminum CLASS PI - CIRCUIT (pF) C - CIRCUIT (pF) A 38,000 - 56,000 19,000 - 28,000 FINISH DESCRIPTION Cadmium B 32,000 - 45,000 16,000 - 22,500 18,000 - 33,000 9,000 - 16,500 2 Aluminum Nickel C 5 Aluminum Gold D 8,000 - 12,000 4,000 - 6,000 6 Aluminum Chem Film E 3,300 - 5,000 1,650 - 2,500 33 Aluminum Ni-PTFE 1000 Hour GreyTM F 800 - 1,300 400 - 650 G 400 - 600 200 - 300 table ll: MICRO-D MOUNTING HARDWARE B P M M1 S S1 L K F R D Thru-Hole Jackpost Jackscrew Jackscrew Jackscrew Jackscrew Jackscrew Jackscrew Float Mount Float Mount Order Hardware Separately Removable Includes Nut and Washer Hex Head Removable E-ring Hex Head Removable E-ring Extended Slot Head Removable E-ring Slot Head Removable E-ring Extended Hex Head NonRemovable Slot Head NonRemovable Extended For Front Panel Mounting For Rear Panel Mounting micro-d FILTER SOLDER CUP dimensions A Max. Layout 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S In . B mm. In. mm. ± .003 ± 0.08 .785 .785 .935 .935 1.085 1.085 1.185 1.185 1.335 1.335 1.485 1.485 19.94 19.94 23.75 23.75 27.56 27.56 30.01 30.01 33.91 33.91 37.72 37.72 .565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 © 2008 Glenair, Inc. C Max. D Max. E Max. In. In. mm. In. mm. In. mm. ± .004 .333 .400 .483 .551 .633 .701 .733 .801 .883 .951 1.033 1.101 8.46 10.16 12.27 14.00 16.08 17.81 18.62 20.35 22.43 24.16 26.24 27.96 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 CAGE Codes 06324 F mm. H Max. ± 0.10 In. mm. 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 .400 .400 .550 .550 .700 .700 .800 .800 .950 .950 1.100 1.100 10.16 10.16 13.97 13.97 17.78 17.78 20.32 20.32 24.13 24.13 27.94 27.94 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] D-7 www.glenair.com