NEC M-521CT Dc line fileter Datasheet

Vol.10
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
Contents
Classification of NEC TOKIN's EMI suppression parts ・・・・・・・3
DIP Type
Common Mode Power Line
SH Series ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・8
SHO Series ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・10
SBT-03W Series ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・11
Common Mode Signal Line
SBT-01W Series ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・12
Toroidal Cores with Wound Cables ・・・・・・・・・・・・・・・・・・・・・・13
DIP Noise Filters D-03C, 03C1, 05N1, 07C1, 08C2, 08C2A ・14
DIP Noise Filters D-16C ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・16
DIP Noise Filters D-37C, 40C, 42C, 45C, 47C ・・・・・・・・・・・・・17
DIP Noise Filters D-55C, 58C ・・・・・・・・・・・・・・・・・・・・・・・・・・・19
Common Mode for Telephone Sets
Noise Filters for Telephone Sets ST-101, 201, 202, 202S ・・・20
Noise Filters for Telephone Sets ST-101A, 201A, 202A ・・・・・21
Noise Filters for Telephone Sets ST-110AV, 110AH, 110BV, 110BH ・・22
Noise Filters for Telephone Sets ST-101F2, 101F4 ・・・・・・・・23
Noise Filters for Telephone Sets ST-104A4, 204A Series ・・・24
Normal Mode
SBT Series ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・25
SNT Series ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・26
Bead Inductors (Lead Type) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・27
Bead Inductors(Winding Type) ・・・・・・・・・・・・・・・・・・・・・・・・・・30
EMC Filter
DFD Series ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・32
Tape and Reel Dimensions ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・33
SMD Type
Common Mode Power Line
SBS9080 Series・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・34
SBP Series ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・35
DCM Series・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・36
Common Mode Signal Line
EMC Chip Filters M-500CT/M-600T Series・・・・・・・・・・・・・・・・38
Precautions ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・40
Tape and Reel Dimensions ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・41
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
Classification of NEC TOKIN's EMI suppression parts
SMD Type
Power Inductors
DIP Type
Large-Current Power Inductors
MPC Series
P9
Large-Current Power Inductors
MPCG Series
P13
Large-Current Power Inductors
MPLC Series
P15
Large-Current Power Inductors
C • PI Series
P18
Leadless Power Inductors
PLC-0735 Series
P21
Leadless Power Inductors
PLC-0745 Series
P24
Leadless Power Inductors
PLC-0755 Series
P27
Leadless Power Inductors
PLC-0760 Series
P30
Leadless Power Inductors
PLC-1035 Series
P33
Leadless Power Inductors
PLC-1045 Series
P36
Leadless Power Inductors
PLC-1055 Series
P39
Leadless Power Inductors
PLC-1060 Series
P42
Leadless Power Inductors
PLC-1235 Series
P45
Leadless Power Inductors
PLC-1245 Series
P48
Leadless Power Inductors
PLC-1255 Series
P51
Leadless Power Inductors
P • I Series
P54
Leadless Power Inductors
P • H Series
P56
SN-S3M Series
P58
Leadless Power Inductors
H • DI-0520 Series
P60
Leadless Power Inductors
H • DI-0630 Series
P62
Leadless Power Inductors
H • DI-0740 Series
P64
Leadless Power Inductors
H • DI-0940 Series
P66
Leadless Power Inductors
H • DI-1040 Series
P68
Leadless Power Inductors
H • DI-1240 Series
P70
Leadless Power Inductors
H • DI-1245G Series
P72
Leadless Power Inductors
H • DI-1280G Series
P74
High Inductance Type SMD Inductors
H • LI Series
P76
SSB Coils
P78
OH Coils
P84
SHP Coils
P86
SBC Coils
P87
SBCP-47HY Coils
P93
SBCP-87HY Coils
P95
SBCP-80HY Coils
P97
(Continued)
DC Line Filters VOL.10
3
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
Magnetic Shields/
Absorbing Materials
EMI Core
Sheet Type
EMI suppressors
P99
SBCP-14HY Coils
P101
SBPSC Coils
P103
FLEX SUPPRESSOR®
Film ImpedorTM
New Products
RingType
Toroidal Cores for Round Cables with High Heat
Resistance and Cable Holding Mechanism
ESD-R-H Series
P6
Snap-on Cores for Round Cables with High Heat
Resistance and Cable Holding Mechanism
ESD-SR-H Series
P7
Toroidal Cores (Bare Type)
P8
Toroidal Cores (Coated Type)
P12
Toroidal Cores with Case
P14
Toroidal Cores with Snail-shaped Case
P16
Snap-on Type
Snap-on Cores for Round Cables
P18
Flat Type
Solid / Split Cores
for Round Cables
P20
Bead Type
Bead Cores
P28
SH Series
P8
SHO Series
P10
SBT-03 W Series
P11
SBT-01 W Series
P12
DIP Type
DC Line Filters
SBCP-11HY Coils
Common Mode
Power Line
Common Mode
Signal Line
Common Mode
for Telephone Sets
Normal Mode
Toroidal Cores with Wound Cables
P13
DIP Noise Filters D-03C, 03C1, 05N1,
07C1, 08C2, 08C2A
P14
DIP Noise Filters
D-16C
P16
DIP Noise Filters
D-37C, 40C, 42C, 45C, 47C
P17
DIP Noise Filters
D-55C, 58C
P19
Noise Filters for Telephone Sets
ST-101, 201, 202, 202S
P20
Noise Filters for Telephone Sets
ST-101A, 201A, 202A
P21
Noise Filters for Telephone Sets
ST-110AV, 110AH, 110BV, 110BH
P22
Noise Filters for Telephone Sets
ST-101F2, 101F4
P23
Noise Filters for Telephone Sets
ST-104A4, 204A series
P24
SBT Series
P25
SNT Series
P26
Bead Inductors (Lead Type)
P27
Bead Inductors (Winding Type)
P30
(Continued)
DC Line Filters VOL.10
4
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
SMD Type
EMC Filter
DFD Series
P32
Common Mode
Power Line
SBS9080 Series
P34
SBP Series
P35
DCM Series
P36
EMC Chip Filters
M-500CT/M-600T Series
P38
SCR Coils
High Impedance Type
P4
SCR Coils
Low Height Type
P5
Earth inductors
SNG series
P6
Common mode
SC Coils — Standard Type
P8
SC Coils — Case Type
SC-E, F, V Type
P10
SC Coils — Case Type
SC-A Type
P12
SC Coils — Terminal Base Type
SC-J Type
P13
SC Coils — Terminal Base Type
SC-GJ Type
P15
SC Coils — Terminal Base Type
SC-JV Type
P16
SC Coils — Terminal Base Type
SC-JS Type
P17
SC Coils — Terminal Base Type
SC-JH Type
P18
SC Coils — Small Type
SC-G/GS Type
P19
SC Coils — Compact, High-Inductance
Type, SCF Type
P21
SC Coils — High Frequency Type
SC-D Type
P22
SU Coils
SU 7VC Type
P23
SU Coils
SU 9V/9H Type
P24
SU Coils
SU 9VF/9HF Type
P26
SU Coils
SU 10VFC-R Type
P27
SU Coils — High Frequency Type
SU 9VD Type
P28
SU Coils — High Frequency Type
SU 10VD Type
P29
SU Coils — High Frequency Type
SU 16VD Type
P30
SS Coils
SS11VL Type
P31
SS Coils
SS11V/H-CH Type
P33
SS Coils
SSB11V-R/11H-R Type
P35
SS Coils
SS17 HB Type
P36
Common Mode
Signal Line
AC Line Filters
New Products
(Continued)
DC Line Filters VOL.10
5
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
SS Coils
SS17VA/HA Type
P39
SS Coils
SS20H Type
P42
SS Coils
SS21V Type
P44
SS Coils
SS24V/H-CH Type
P46
SS Coils
SS26V Type
P48
SS Coils
SS28V/H-CH Type
P50
SS Coils
SSB28V/H Type
P52
SS Coils
SS30V Type
P53
SS Coils
SS35V/35H Type
P55
SS Coils
SS38V Type
P56
HHB Coils
High μ and Low Core loss Type
P59
SN Coils
Small and Standard Type
P63
SN Coils
Terminal Base Type — J Type
P66
SN Coils
Terminal Base Type — JA Type
P67
SN Coils
Terminal Base Type — JB Type
P68
SN Coils
Terminal Base Type — W Type
P69
SN Coils
Terminal Base Type — P1 Type
P70
SN Coils
Terminal Base Type — P2 Type
P71
High frequency type
SHB Coils
(Booster Coils for Active Filters)
P72
New Products
LF-SF Series
Plastic Case Three-Phase Noise Filter
P8
GT-SF Series
Plastic Case Single-Phase Noise Filter
P9
LF Series
Small Current Type
P10
LF Series Small Current Type with
Screw Terminal
P11
LF Series
Screw Terminal Type
P13
LF Series
Large Current Type
P15
LF Series
Three-Phase Type
P16
LF Series
For Inverters
P18
LF Series Compliance with
CE Marking(LF-3000 Series)
P21
LH Series Low-Frequency
Inverters
P23
LH Series Compliance with
CE Marking(LH-4 Series)
P25
Normal mode
Noise Filters
Casing Type
Metal box
(Continued)
DC Line Filters VOL.10
6
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
Metal cylinder
Plastic box
Inlet Type
HFP Series
P26
GT Series
Screw Terminal
P28
GT Series
Faston® Terminal
P30
GT Series
For VCCI
P32
GF Series
P33
VU Series
P34
VC Series
P36
VG-FPZ Series for inverter installed
home appliances' surge control
P37
RG Series
P38
MR Series
P40
MA Series
P42
GL Series
C Type
P43
GL Series
F,FV,FVP Type
P45
GL Series
H Type
P47
GL Series
M Type
P49
DC Line Filters VOL.10
7
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
DIP Type
Common Mode Power Line
SH Series
[RoHS Compliant]
Model
for 2 lines
for 3 lines
SH-101
SH-102
SH-201
SH-202
SH-301
SH-302
SH-211
SH-212
SH-311
SH-312
SH-121
SH-122
SH-321
SH-322
SH-132
SH-432
SH-S132
Rated voltage
DC (V)
Rated current
(A)
Inductance
(µH) min.
DC resistance
(m/line) max.
150
150
150
150
150
150
150
150
150
150
50
50
50
50
50
50
50
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
2.4
2.4
1.0
0.35
1.5
0.5
1.5
3.2
7.5
0.5
1.5
3.2
7.5
0.35
1.5
3.5
7.5
2.6
30.0
1.7
16
26
16
20
22
26
18
23
25
30
11
20
14
20
51
51
81
Operating
temperature range
(˚C)
–25 to +80
–25 to +80
–25 to +80
–25 to +80
–25 to +80
–25 to +80
–25 to +80
–25 to +80
–25 to +80
–25 to +80
–25 to +80
–25 to +80
–25 to +80
–25 to +80
–25 to +60
–25 to +60
–25 to +80
Shape and
dimensions
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
DC Line Filters VOL.10
8
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
DIP Type
Common Mode Power Line
Shape and Dimensions/Circuit Diagram
12.5 max.
10 max.
Fig. 2
14 max.
12 max.
ø0.6
ø0.7
10±0.5
7.5±0.5
10±0.5
12.5 max.
Fig. 3
Circuit diagram
10
7.5
4.0±1.0
7.5
12 max.
Circuit diagram
10
4.0±1.0 9.5 max.
Fig. 1
7.5±0.5
10 max.
10 max.
Circuit diagram
7.5
10
ø0.7
5
3
4
9.0 max.
2
Circuit diagram
6
1
2
5
3
4
Circuit diagram
1
6
2
5
3
4
1
2
3
6
5
4
(3.0)
(3.0)
10.5 max.
10.5 max.
6
10 max.
Fig.5
10 max.
1
7.5±0.5
9.0 max.
Fig.4
3.0±0.7
10±0.5
(ø0.6)
(6.5)
(2.5)
(ø0.6)
(6.5)
(2.5)
(2.5)
(2.5)
[mm]
Impedance vs. Frequency
10000
1000
302
Impedance ()
Impedance ()
10000
301
100
202
201
10
1
1000
312
311
100
211
10
1
1
10
100
1000
1
10
Frequency (MHz)
100
1000
Frequency (MHz)
10000
10000
132
102/122
Impedance ()
1000
Impedance ()
212
101/121
100
10
1
432
1000
322
100
321
S132
10
1
1
10
100
Frequency (MHz)
1000
1
10
100
1000
Frequency (MHz)
DC Line Filters VOL.10
9
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
DIP Type
Common Mode Power Line
SHO Series
[RoHS Compliant]
Model
Rated voltage
DC (V)
Rated current
(A)
Inductance
(µH) min.
SHO-101
SHO-102
SHO-301
SHO-302
SHO-303
SHO-402
SHO-501
50
50
50
50
50
50
50
4.0
4.0
4.0
4.0
5.0
0.8
0.8
2.0
0.6
12.0
3.9
6.0
99.0
17.5
DC resistance
(m/line) max.
15.5
10.0
15.5
10.0
8.0
120.0
105.0
Shape and Dimensions
Operating
temperature range
(˚C)
–25 to +70
–25 to +70
–25 to +70
–25 to +70
–25 to +75
–25 to +80
–25 to +80
D
Dimensions(mm)
T
R
11Max.
11Max.
11Max.
11Max.
11Max.
7.5Max.
6.2Max.
7.5Max.
7.5Max.
7.5Max.
7.5Max.
8Max.
5Max.
3.4Max.
10±3
10±3
10±3
10±3
10±3
4±2
4±2
Circuit Diagram
D
T
3
1
4
R
2
Soldered
4 1
2 3
[mm]
Impedance vs. Frequency
10000
Impedance ()
301
303
402
501
1000
101
100
102
10
302
1
1
10
100
1000
Frequency (MHz)
DC Line Filters VOL.10
10
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
DIP Type
Common Mode Power Line
SBT-03W Series
[RoHS Compliant]
Model
Rated voltage
DC (V)
Rated current
(A)
SBT-0308W
SBT-0310W
SBT-0315W
50
50
50
3.0
2.5
2.0
Inductance
(100kHz, 1mA)
(µH) min.
6.75
7.7
11.9
• Withstanding voltage: 200VDC (one minute, between lines)
DC resistance
(m) max.
20
30
45
Operating
temperature range
(˚C)
–25 to +85
–25 to +80
–25 to +75
Wire size
(mmø)
Packaging
0.4
0.35
0.3
Bulk (100 pcs.)
• Insulation resistance: more than 10M (100VDC, between lines)
Shape and Dimensions
Circuit Diagram
10.5 max.
7.5 max.
3
10.5max.
4-ø0.6
1
4
N1
2
7.5±0.5
N2
5.0
7.5
2
5.0
4
3.5±1.0 8.0 max.
7.5max.
7.5
1
3
5.0±0.5
[mm]
[mm]
Impedance vs. Frequency
10000
0315W
Impedance ()
1000
0308W
100
0310W
10
1
1
10
100
1000
Frequency (MHz)
DC Line Filters VOL.10
11
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
DIP Type
Common Mode Signal Line
SBT-01W Series
[RoHS Compliant]
Model
Rated voltage
DC (V)
Rated current
(mA)
SBT-0115W
SBT-0140W
SBT-0160W
SBT-0180W
50
50
50
50
500
500
500
500
Inductance
(1kHz, 70mA)
(µH)
5
40±35%
60±35%
80±35%
• Withstanding voltage: 200VDC (one minute, between lines)
(1.0)
(ø0.6)
1
3
2
2.54
3 4
N2
2.54
2 2
5.08
4.5±1.0 (1.0)
4 3
Bulk (100pcs.)
Circuit Diagram
8.0 max.
6.4 max.
6.4max.
1 1
30
40
45
55
Packaging
• Insulation resistance: more than 10M (100VDC, between lines)
Shape and Dimensions
7.5 max.
7.5max.
Operating
temperature range
(˚C)
–25 to +70
–25 to +70
–25 to +70
–25 to +70
DC resistance
(m) max.
4
N1
5.08±0.5
5.08
2.54 ±0.3
[mm]
[mm]
Impedance vs. Frequency
10000
0180W
0160W
Impedance ()
1000
0140W
0115W
100
10
1
1
10
100
1000
Frequency (MHz)
DC Line Filters VOL.10
12
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
DIP Type
Common Mode Signal Line
Toroidal Cores with
Wound Cables
[RoHS Compliant]
Model
Dimensions (mm)
Core
ESD-H-12E
ESD-H-14U
ESD-H-14NU
ESD-R-12C
ESD-R-14A
ESD-R-14C2
A
B
C
D
16
17.5
17.5
20
7
7
5
5
5
25
15
15
No. of turns
Wire
Winding status
Frequency range
(MHz)
7
10
10
UL1007 AWG26 (ø0.4)
UL1609 AWG26 (ø0.4)
UL1609 AWG26 (ø0.4)
Bi-filar winding
Bi-filar winding
Bi-filar winding
Up to 300
Up to 100
Up to 300
• Recommended soldering conditions: 350±10˚C, 2 to 3 sec. • Rated current:1A
Shape and Dimensions
• Rated Voltage: 125V
Circuit Diagram
ESD-H Series
B
C
D
A
Impedance vs. Frequency
1K
10K
5K
Impedance ()
Impedance ()
14U
100
12E
10
1
14NU
1K
500
100
50
10
1
5
10
50
Frequency (MHz)
100
500
1
5
10
50
100
500
Frequency (MHz)
DC Line Filters VOL.10
13
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
DIP Type
Common Mode Signal Line
DIP Noise Filters
D-03C, 03C1, 05N1, 07C1, 08C2, 08C2A
[RoHS Compliant]
Model
Number of
terminals/Circuits
Rated voltage
DC (V)
16P/2 circuits x 4
Common mode
50
8 cores
16P/8 circuits
Normal mode
1 core
Circuit diagram
D-03C
1
2
16
15
D-03C1
7
8
10
9
1
2
16
15
8
9
1
2
16
15
8
9
D-08C2
1
2
3
4
8
7
6
5
D-08C2A
1
2
3
4
8
7
6
5
D-05N1
D-07C1
Rated current
DC (mA/Line)
DC resistance
(m/Line) max.
Operating
temperature range
(˚C)
150
75
–20 to +70
100
150
–20 to +70
50
100
10
–20 to +70
16P/8 circuits
Common mode
50
300
100
–20 to +70
1 core
8P/4 circuits
Common mode
50
2300
25
–20 to +70
1 core
8P/4 circuits
Common mode
50
500
70
–25 to +65
4 cores
• Withstanding voltage: 200VDC (one minute, between lines)
• Insulation resistance: more than 10M (100VDC, between lines)
Shape and Dimensions
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
4.0min.
2.85±0.5
4.0min.
10 max.
(0.5)
R2 0.2
25.5 max.
2.54±0.25
16
15
14
13
12
11
10
9
9.0 max.
(0.5)
23 max.
1
2
3
4
5
6
7
8
2.54±0.25
16
15
14
13
12
11
10
9
D-07C1
12.5 max.
8.0 max.
(0.5)
25.5 max.
R2 0.2
1
2
3
4
5
6
7
8
D-05N1
25.5 max.
12.5 max.
ø0.6
2.54±0.25
D-03C, 03C1
20.32±0.25
ø0.6
ø0.6
7.62±0.25
7.62±0.25
D-08C2
D-08C2A
21 max.
12 max.
ø0.7
5.0±0.5
7.0±0.5
3.0 min.
20 max.
3.0 min.
5.0±0.5
16 max.
14 max.
21max.
ø0.7
7.0±0.5
[mm]
DC Line Filters VOL.10
14
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
DIP Type
Common Mode Signal Line
Impedance vs. Frequency
5K
Impedance ()
03C1
1K
07C1
500
03C
08C2
08C2A
100
05N1
50
10
1
5
10
50
100
500
Frequency (MHz)
DC Line Filters VOL.10
15
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
DIP Type
Common Mode Signal Line
DIP Noise Filters
D-16C
[RoHS Compliant]
Model
Circuit diagram
1
2
3
4
D-16C
8
7
6
5
Number of
terminals/ Circuits
Rated voltage
DC (V)
Rated current
DC (mA/Line)
DC resistance
(m/Line) max.
Operating
temperature range
(˚C)
8P/4 circuits
Common mode
50
100
50
–20 to +70
1 core
• Withstanding voltage: 200VDC (one minute, between lines)
• Insulation resistance: more than10M (100VDC, between lines)
Shape and Dimensions
D-16C
1
8
2
7
3
6
4
5
2.54±0.25
8.0 max.
16 max.
12.5 max.
4.0 min.
ø0.6
7.62±0.25
[mm]
Impedance vs. Frequency
Impedance ()
5K
1K
500
16C
100
50
10
1
5
10
50
100
500
Frequency (MHz)
DC Line Filters VOL.10
16
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
DIP Type
Common Mode Signal Line
DIP Noise Filters
D-37C, 40C, 42C, 45C, 47C
[RoHS Compliant]
Model
Number of
terminals/ Circuits
Rated voltage
DC (V)
Rated current
DC (mA/Line)
DC resistance
(m/Line) max.
Operating
temperature range
(˚C)
1 core
20P/10 circuits
Common mode
50
300
200
–20 to +70
1 core
6P/ 3 circuits
Common mode
50
300
200
–20 to +70
1 core
10P/ 5 circuits
Common mode
50
300
200
–20 to +70
1 core
16P/ 8 circuits
Common mode
50
300
150
–20 to +70
1 core
20P/ 10 circuits
Common mode
50
300
200
–20 to +70
Circuit diagram
1
2
20
19
10
11
1
2
3
6
5
4
1
2
10
9
5
6
1
2
16
15
8
9
1
2
20
19
10
11
D-37C
D-40C
D-42C
D-45C
D-47C
• Withstanding voltage: 200VDC (one minute, between lines)
• Insulation resistance: more than 10M (100VDC, between lines)
Shape and Dimensions
D-37C
D-40C, 42C, 45C, 47C
9.0 max.
4.5±0.5
11.5 max.
28 max.
Lot No.
a a a a a a a a a
(a=2.5±0.25)
5.0±0.25
max.
4.5 10 max.
ø0.5
2.54±0.3
(22.5)
ø0.5
7.62
2.54(n-I)=R
L
Model Number of Circuits
D-40C
3
D-42C
5
D-45C
8
D-47C
10
10.5 max.
R
5.08
10.16
17.78
22.86
L
12.7 max.
18 max.
25 max.
28 max.
[mm]
DC Line Filters VOL.10
17
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
DIP Type
Common Mode Signal Line
Impedance vs. Frequency
10000
1000
Impedance ()
Impedance ()
10000
37C
100
10
1
1000
40C
100
10
1
1
10
100
1000
1
10
Frequency (MHz)
1000
1000
Impedance ()
10000
Impedance ()
10000
42C
100
100
1000
Frequency (MHz)
10
45C/47C
100
10
1
1
1
10
100
Frequency (MHz)
1000
1
10
100
1000
Frequency (MHz)
DC Line Filters VOL.10
18
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
DIP Type
Common Mode Signal Line
DIP Noise Filters
D-55C, 58C
[RoHS Compliant]
Model
Number of
terminal/ Circuits
Rated voltage
DC (V)
Rated current
DC (mA/Line)
DC resistance
(m/Line) max.
Operating
temperature range
(˚C)
1 core
10P/5 circuits
Common mode
50
300
200
–20 to +70
1 core
16P/8 circuits
Common mode
50
300
200
–20 to +70
Circuit diagram
D-55C
D-58C
1
2
10
9
5
6
1
2
16
15
8
9
• Withstanding voltage: 200VDC (one minute, between lines)
• Insulation resistance: more than10M (100VDC, between lines)
Shape and Dimensions
max.
4.5 10max.
Lot No.
2.54±0.25
ø0.5
7.62±0.25
2.54(n-I)=R
L
10.5max.
Model Number of Circuits
D-55C
5
D-58C
8
R
10.16
17.78
L
18 max.
25 max.
[mm]
Impedance vs. Frequency
Impedance ()
5K
1K
55C
500
58C
100
50
10
1
5
10
50
100
500
Frequency (MHz)
DC Line Filters VOL.10
19
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
DIP Type
Common Mode for Telephone Sets
Noise Filters for Telephone Sets
ST-101, 201, 202, 202S
[RoHS Compliant]
Frequency range
(MHz)
Model
ST-101
ST-201
ST-202
ST-202S
Impedance
(k) min.
0.5 to 7
7 to 40
7 to 100
7 to 100
3
1.5
0.6
0.6
Rated voltage
DC (V)
Rated current
(mA)
DC resistance
(m/Line) max.
50
50
50
50
200
200
1000
1000
180
100
40
35
(at 0.5 MHz)
(at 7 MHz)
(at 100 MHz)
(at 100 MHz)
• Withstanding voltage: 500VDC (one minute, between lines)
• Recommended soldering conditions: 350±10˚C, 2 to 3 sec.
Operating
temperature range
(˚C)
–20 to +75
–20 to +75
–20 to +75
–20 to +75
Remarks
AM band
FM band
FM band
FM band
• Insulation resistance: more than10M (250VDC, between lines)
Shape and Dimensions/Circuit Diagram
ST-101, 201
ST-202
11 max.
18 max.
ST-202S
16 max.
13 max.
9.0 max.
Circuit diagram
7.0 max.
Installation Examples
10±2.0
2.0 max.
ø0.4
10±2.0
5.0±2.0
15.0±2.0
ø0.32
2.0 max.
ø0.32
[mm]
Design Examples
Installation position
Telephone set
Rosette
Installation at rosette or circuit input/output
Terminal
(facsimile, card reader, etc.)
Telephone line
Telephone
ST, LFT, HFT
Installed filter
ST-201 ST-101
ST-201A ST-101A
ST-202 ST-101F2
ST-202A ST-101F4
ST-202S ST-110AH
SZ-03
ST-110AV
ST-110BH
ST-110BV
ST-104A4
ST-204A1
ST-204A3
ST-204A4
Insertion in Driver/ Receive
circuit in telephone
Line terminal unit
L1
Installed filter LFT
HFT
Drv.
Circuit
L2
Telephone
Rec.
Impedance vs. Frequency
Impedance (k)
100
101
10
1
201
0.1
0.01
0.1
202
202S
1
10
100
500
Frequency (MHz)
DC Line Filters VOL.10
20
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
DIP Type
Common Mode for Telephone Sets
Noise Filters for Telephone Sets
ST-101A, 201A, 202A
[RoHS Compliant]
Frequency range
(MHz)
Model
ST-101A
ST-201A
ST-202A
0.5 to 7
7 to 40
7 to 100
Impedance
(k) min.
Rated voltage
DC (V)
Rated current
(mA)
DC resistance
(m/Line) max.
3 (at 0.5 MHz)
1.5 (at 7 MHz)
0.6 (at 100 MHz)
50
50
50
200
200
1000
250
150
50
• Withstanding voltage: 500VDC (one minute, between lines)
Operating
temperature range
(˚C)
–20 to +65
–20 to +65
–20 to +65
Remarks
AM band
FM band
FM band
• Insulation resistance: more than10M (100VDC, between lines)
Shape and Dimensions/Circuit Diagram
16 max.
10.5 max.
Circuit diagram
ø0.7
7.62±0.5
4.0 ± 0.5 20 max.
5.08±0.5
[mm]
Installation Examples
Design Examples
Installation position
Telephone set
Rosette
Installation at rosette or circuit input/output
Terminal
(facsimile, card reader, etc.)
Telephone line
Telephone
ST, LFT, HFT
Installed filter
ST-201 ST-101
ST-201A ST-101A
ST-202 ST-101F2
ST-202A ST-101F4
ST-202S ST-110AH
SZ-03
ST-110AV
ST-110BH
ST-110BV
ST-104A4
ST-204A1
ST-204A3
ST-204A4
Insertion in Driver/ Receive
circuit in telephone
Line terminal unit
L1
Installed filter LFT
HFT
Drv.
Circuit
L2
Telephone
Rec.
Impedance vs. Frequency
Impedance (k)
100
101A
10
1
201A
202A
0.1
0.01
0.1
1
10
100
500
Frequency (MHz)
DC Line Filters VOL.10
21
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
DIP Type
Common Mode for Telephone Sets
Noise Filters for Telephone Sets
ST-110AV, 110AH, 110BV, 110BH
[RoHS Compliant]
Model
Frequency range
(MHz)
ST-110AV
ST-110AH
ST-110BV
ST-110BH
0.5 to 7
0.5 to 7
0.5 to 7
0.5 to 7
Impedance
(k) min.
Rated voltage
DC (V)
Rated current
(mA)
DC resistance
(/Line) max.
50
50
50
50
300
300
150
150
3
3
7.5
7.5
27 (at 0.5 MHz)
27 (at 0.5 MHz)
150 (Resonant)
150 (Resonant)
• Withstanding voltage: 500VDC (one minute, between lines)
Operatings
temperature range
(˚C)
–20 to +75
–20 to +75
–20 to +75
–20 to +75
Remarks
AM band
AM band
AM band
AM band
• Insulation resistance: more than 10M (250VDC,between lines)
Shape and Dimensions/Circuit Diagram
ST-110AV, ST-110BV
17 max.
ST-110AH, ST-110BH
11max.
17 max.
15.5 max.
8.0
4.0 min. 12 max.
ø0.6
4.0 min.
ø0.6
Circuit diagram
8.0
17 max.
Circuit diagram
7.0
8.0±0.5
7.0
7.0±0.5
8.0±0.5
Installation Examples
[mm]
7.0±0.5
Design Examples
Installation position
Telephone set
Rosette
Installation at rosette or circuit input/output
Terminal
(facsimile, card reader, etc.)
Telephone line
Telephone
ST, LFT, HFT
Installed filter
ST-201 ST-101
ST-201A ST-101A
ST-202 ST-101F2
ST-202A ST-101F4
ST-202S ST-110AH
SZ-03
ST-110AV
ST-110BH
ST-110BV
ST-104A4
ST-204A1
ST-204A3
ST-204A4
Insertion in Driver/ Receive
circuit in telephone
Line terminal unit
L1
Installed filter LFT
HFT
Drv.
Circuit
L2
Telephone
Rec.
Impedance vs. Frequency
Impedance (k)
1000
100
10
110BH BV
110AH AV
1
0.1
0.01
0.1
1
10
500
Frequency (MHz)
DC Line Filters VOL.10
22
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
DIP Type
Common Mode for Telephone Sets
Noise Filters for Telephone Sets
ST-101F2, 101F4
[RoHS Compliant]
Model
Frequency range
(MHz)
Impedance
(k) min.
Rated voltage
DC (V)
Rated current
(mA)
DC resistance
(/Line) max.
ST-101F2
ST-101F4
0.5 to 7
0.5 to 7
40 (at 600 kHz)
60 (at 600 kHz)
50
50
200
200
2.7
3.5
• Withstanding voltage: 500VDC (one minute, between lines)
Operating
temperature range
(˚C)
–20 to +75
–20 to +75
Remarks
AM band
AM band
• Insulation resistance: more than 10M (250VDC between lines)
Shape and Dimensions/Circuit Diagram
Bottom view
Bottom view
13 max.
ø0.6
5.0±0.5
7.5±0.5
2.0 min. *10.5 max.
Circuit diagram
7.5±0.5
14 max.
5.0±0.5 *11.5 max. with ST-101F4
[mm]
Installation Examples
Design Examples
Installation position
Telephone set
Rosette
Installation at rosette or circuit input/output
Terminal
(facsimile, card reader, etc.)
Telephone line
Telephone
ST, LFT, HFT
Installed filter
ST-201 ST-101
ST-201A ST-101A
ST-202 ST-101F2
ST-202A ST-101F4
ST-202S ST-110AH
SZ-03
ST-110AV
ST-110BH
ST-110BV
ST-104A4
ST-204A1
ST-204A3
ST-204A4
Insertion in Driver/ Receive
circuit in telephone
Line terminal unit
L1
Drv.
Installed filter LFT
HFT
Circuit
L2
Telephone
Rec.
Impedance vs. Frequency
Impedance (k)
1000
100
10
101F4
101F2
1
0.1
0.01
0.1
1
10
500
Frequency (MHz)
DC Line Filters VOL.10
23
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
DIP Type
Common Mode for Telephone Sets
Noise Filters for Telephone Sets
ST-104A4, 204A Series
[RoHS Compliant]
Model
Frequency range
(MHz)
Impedance
(k) min.
Rated voltage
DC (V)
Rated current
(mA)
DC resistance
(/Line) max.
ST-104A4
ST-204A1
ST-204A3
ST-204A4
0.5 to 7
7 to 100
7 to 40
7 to 40
3.0 (at 0.5 MHz)
0.25 (at 10 MHz)
1.0 (at 7 MHz)
0.6 (at 7 MHz) REF
50
50
50
50
500
500
500
500
0.36
0.10
0.17
0.12
• Withstanding voltage: 500VDC (one minute, between lines)
Remarks
AM band
FM band
FM band
FM band
• Insulation resistance: more than 10M (250VDC, between lines)
Bottom view
Shape and Dimensions/Circuit Diagram
2.54±0.53
*12 max. with ST-104A4
13 max.
Operating
temperature range
(˚C)
–20 to +75
–20 to +75
–20 to +75
–20 to +75
*11max. 3.5±1.0
ø0.7
13 max.
7.62±0.5
Circuit diagram
Installation Examples
1
5
2
6
3
7
4
8
[mm]
Design Examples
Installation position
Telephone set
Rosette
Installation at rosette or circuit input/output
Terminal
(facsimile, card reader, etc.)
Telephone line
Telephone
ST, LFT, HFT
Installed filter
ST-201 ST-101
ST-201A ST-101A
ST-202 ST-101F2
ST-202A ST-101F4
ST-202S ST-110AH
SZ-03
ST-110AV
ST-110BH
ST-110BV
ST-104A4
ST-204A1
ST-204A3
ST-204A4
Insertion in Driver/ Receive
circuit in telephone
Line terminal unit
L1
Drv.
Installed filter LFT
HFT
Circuit
L2
Telephone
Rec.
Impedance vs. Frequency
Impedance (k)
100
104A4
10
1
204A3
204A4
0.1
204A1
0.01
0.1
1
10
100
500
Frequency (MHz)
DC Line Filters VOL.10
24
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
DIP Type
Normal Mode
SBT Series
[RoHS Compliant]
• Tape and Reel Dimensions (see page 39)
•
T
Model
Rated voltage
DC (V)
Rated current
(mA)
Inductance
(1kHz, 70mA)
(µH)
DC resistance
(m) max.
Operating
temperature range
(˚C)
Packaging
SBT-0208
SBT-0210
SBT-0240
SBT-0260
50
50
50
50
500
500
500
500
8±50%
10±50%
40±35%
60±35%
20
20
34
50
–25 to +70
–25 to +70
–25 to +70
–25 to +70
Bulk (100pcs.)
Taping (2000 pcs./ reel x 6),
Flat taping (1000pcs./ box x 10)
TF
Shape and Dimensions
SBT-02
3.0 max.
8.7 max.
7.5 max.
(ø0.6)
4.5±1.0
5.0±0.5
[mm]
Impedance vs. Frequency
10K
Impedance ()
5K
1K
500
0260
100
50
0240
0210
0208
10
0.1
1
10
100
500
Frequency (MHz)
DC Line Filters VOL.10
25
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
DIP Type
Normal Mode
SNT Series
[RoHS Compliant]
• Tape and Reel Dimensions (see page 39)
Model
Rated current*
(A)
Inductance
(µH) min.
DC resistance
(m) max.
Operating
temperature range
(˚C)
Packaging
3.0
1.5
0.5
3.0
1.5
0.5
1.5
6
13
2.5
10
20
25
35
95
25
45
98
–20 to +60
–20 to +60
–20 to +60
–20 to +60
–20 to +60
–20 to +60
Bulk (100 pcs.)
SNT-S10
SNT-S20
SNT-S30
SNT-D10
SNT-D20
SNT-D30
*The rated current is for the wire and it is different from the inductance guaranteeing values.
• T Taping (1000 pcs./ reel) • TF Flat taping (SNT-S type: 1000 pcs./ reel), (SNT-D type: 500 pcs./ reel)
Shape and Dimensions
Design Example
5.0 max. (S type)
6.0 max. (D type)
9.5 max.
5.0±1.0 12.7 max.
For noise suppression in the secondary
low-voltage power supply circuit
(ø0.5)
Vcc
GND
DC power supply circuits
5.0±0.2
[mm]
10K
10K
5K
5K
Impedance ()
Impedance ()
Impedance vs. Frequency
1K
500
S30
S20
100
50
1K
500
D30
100
D20
50
S10
10
D10
10
1
5
10
50
Frequency (MHz)
100
500
1
5
10
50
100
500
Frequency (MHz)
DC Line Filters VOL.10
26
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
DIP Type
Normal Mode
Bead Inductors (Lead Type)
[RoHS Compliant]
Model
Rated current
DC (A)
Impedance
()
Operating temperature range
(˚C)
5
2 (at 1 MHz)
4 (at 1 MHz)
5 (at 1 MHz)
40 (at 10 MHz)
–20 to +70
B-01-Series
B-02-Series
B-03-Series
B-06-Series
Note: Rated current values are not guaranteed by impedance levels; these values are permissible levels when the lead wire temperature rise is 20˚C.
Model
Shape
Packaging
B-01-R
B-01-RT
B-01-RTF
B-01-RS
B-01-RTS
B-01-RTSF
B-01-A
B-01-A1
B-01-A2
B-01-AT
B-01-ATF
B-01-AT1F
B-02-R
B-02-RT
B-02-RTF
B-03-R
B-03-RT
B-06-R-25
B-06-RTF-25
B-06-R-50
B-06-RTF-50
Single-bead, radial-lead
Single-bead, radial-lead
Single-bead, radial-lead
Single-bead, radial-lead
Single-bead, radial-lead
Single-bead, radial-lead
Single-bead, axial-lead
Single-bead, axial-lead
Single-bead, axial-lead
Single-bead, axial-lead
Single-bead, axial-lead
Single-bead, axial-lead
Double-bead, radial-lead
Double-bead, radial-lead
Double-bead, radial-lead
Double-bead, radial-lead
Double-bead, radial-lead
Double-bead, radial-lead
Double-bead, radial-lead
Double-bead, radial-lead
Double-bead, radial-lead
Bulk type (100 pcs./bag)
Tape type (2000 pcs./reel)
Tape type (2000 pcs./box)
Bulk type (100 pcs./bag)
Tape type (2000 pcs./reel)
Tape type (2000 pcs./box)
Bulk type (100 pcs./bag)
Bulk type (250 pcs./bag)
Bulk type (250 pcs./bag)
Tape type (5000 pcs./reel)
Tape type (1500 pcs./box)
Tape type (2000 pcs./box)
Bulk type (100 pcs./bag)
Tape type (2000 pcs./reel)
Tape type (1500 pcs./box)
Bulk type (100 pcs./bag)
Tape type (2000 pcs./reel)
Bulk type (100 pcs./bag)
Tape type (1500 pcs./reel)
Bulk type (100 pcs./bag)
Tape type (1500 pcs./box)
Impedance Characteristics
Impedance ()
1000
100
10
1
1
10
100
1000
Frequency (MHz)
DC Line Filters VOL.10
27
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
DIP Type
Normal Mode
Shape and Dimensions
(5.0)
27±3.0
ø0.65
(Tin coated
soft copper
wire)
7.0 max.
2.5 max.
ø0.65
(Tin coated
soft copper
wire)
(2.5)
(5.0)
8.0 max.
15 min.
4.4±0.2
7.5 max.
ø0.65
(Tin coated
soft copper
wire)
2.4 max.
ø0.65
(Tin coated
soft copper
wire)
7.0 max.
2.5 max.
10 max.
8.5 max.
6.0 max.
B-06-R-50 Series
B-03-R Series
ø3.4±0.2
27±3.0
B-01-RS Series
20 min.
4.2 max.
6.0 max.
15 min.
4.4±0.2
13 max.
10±2.0
20 min.
10.5 max.
ø0.65
(Tin coated
soft copper
wire)
10±2.0
B-06-R-25 Series
B-02-R Series
ø3.4±0.2
6.0 max.
B-01-R Series
ø0.65
(Tin coated
soft copper
wire)
(5.0)
(5.0)
(5.0)
ø3.4±0.2
B-01-A Series
4.4±0.2
ø0.65
(Tin coated soft copper wire)
67±2.0
ø3.4±0.2
B-01-A1
4.4±0.2
4.5±1.0
(6.5)
12.5±0.8
ø0.65
(Tin coated soft copper wire)
ø3.4±0.2
B-01-A2
4.4±0.2
4.5±1.0
(6.5)
10±0.8
ø0.65
(Tin coated soft copper wire)
[mm]
DC Line Filters VOL.10
28
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
DIP Type
Normal Mode
Tape and Reel Dimensions
B-01-RT • RTF
B-02-RT • RTF/B-03-RT
3.85±0.7
9.0±0.5
3.85±0.7
B-06-RTF-25
B-01-AT • ATF
9.0±0.5
2.5±0.5
5.1±0.7
ø4.0±0.2
18.0 –0.5
11 max
.
+2.0
1.0 max.
18.0 –0
32.2 max.
+1.0
9.0±0.5
12.7±0.3
3.85±0.7
18.0 –0.5
11 max
.
+1.5
1.0 max.
5.0±0.5
+1.0
12.7±1.0
12.7±1.0
32.2 max.
ø4.0±0.2
12.7±0.3
B-01-RTS • RTSF
20 –1.0
12.7±0.3
+1.0
11 max.
+2
18.0 –0
1.0 max.
5.0±0.5
ø4.0±0.2
18.0 –0.5
+1.0
18.0 –0.5
9.0±0.5
5.0±0.5
32.2 max.
12.7±1.0
11 max.
32.2 max.
1.0 max. 16±1.0
12.7±1.0
ø4.0±0.2
12.7±0.3
B-06-RTF-50
6.0±1.0
9.0±0.5
+1.0
32.2 max.
11 max
.
18.0 –0.5
+2.0
52 –1.0
6.0±1.0
1.0 max. 16±1.0
5.0±0.5
12.7±1.0
5.0±0.5
3.85±0.7
12.7±0.3
ø4.0±0.2
5.0±0.5
B-01-AT1F
6.0±1.0
+1.5
26 –1.0
6.0±1.0
[mm]
DC Line Filters VOL.10
29
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
DIP Type
Normal Mode
Bead Inductors
(Winding Type)
[RoHS Compliant]
Model
Core
B-1
B-3
B-4
B-5
B-7
B-8
B-9
B-10
B-6-22B
B-6-31B
Wire
No. of turns
Teflon wire (ø0.26 : single) / Color: White
Teflon wire (ø0.51 : single) / Color: Red
Teflon wire (ø0.26 : single) / Color: White
Teflon wire (ø0.26 : single) / Color: White
Teflon wire (ø0.32 : single) / Color: Green
Teflon wire (ø0.4 : single) / Color: Blue
Teflon wire (ø0.4 : single) / Color: Yellow
Teflon wire (ø0.4 : single) / Color: Black
Soft copper wire (ø0.6)
Soft copper wire (ø0.6)
B-20F-28
B-20L-48B
B-20L-44
B-20L-44
B-20F-28
B-20L-48B
B-20L-48B
B-20L-48B
—
—
2T
2T
2T
3T
2T
2T
3T
4T
—
—
8.0max.
a a
(ø0.6)
7.62±0.2
B-6-22B
3.0 max.
40±3.0
10.0±0.5
2.5 max.
40±3.0
(ø0.6)
Model
B-1
B-3
B-4
B-5
B-7
a a
7.62±0.2
13.4 max.
3.0 max.10±0.5
40±3.0
5.08±0.2
a
ø0.4
a
5.08±0.2
a=2.54±0.3
B-6-31B
(c)max.
(Clock pulse oscillating section)
1.5max.
B-8,9,10
(a)max.
(b)±1.5 1.5max.
B-1,3,4,5,7
5.0±2.0 7.0max.
Shape and Dimensions
(a)
5.5
9
10.5
11
6
(b)
5
5
5
5
5
(c)
9
10
9
9
9
[mm]
Impedance vs. Frequency
B-1
B-3
1000
Impedance ()
Impedance ()
1000
100
10
100
10
1
1
1
10
100
Frequency (MHz)
1000
1
10
100
1000
Frequency (MHz)
DC Line Filters VOL.10
30
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
DIP Type
Normal Mode
Impedance vs. Frequency
B-4
B-5
1000
Impedance ()
Impedance ()
1000
100
10
1
100
10
1
1
10
100
1
1000
Frequency (MHz)
B-7
B-8
Impedance ()
Impedance ()
1000
1000
100
10
1
100
10
1
1
10
100
1000
1
Frequency (MHz)
10
100
1000
Frequency (MHz)
B-9
B-10
1000
1000
Impedance ()
Impedance ()
100
Frequency (MHz)
1000
100
10
1
100
10
1
1
10
100
1000
1
Frequency (MHz)
10
100
1000
Frequency (MHz)
B-6-22B
B-6-31B
1000
1000
Impedance ()
Impedance ()
10
100
10
1
100
10
1
1
10
100
Frequency (MHz)
1000
1
10
100
1000
Frequency (MHz)
DC Line Filters VOL.10
31
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
DIP Type
EMC Filter
DFD Series
[RoHS Compliant]
Model
Rated voltage
DC (V)
Rated current
DC (A)
DC resistance
(m) max.
DFD-104P
DFD-104S
50
50
2.0
2.0
100
100
• Withstanding voltage: 125VDC, 5 sec. between terminal 1 and 2
Operating
temperature range
(˚C)
–25 to +85
–25 to +85
• Insulation resistance: more than 500M (100VDC, one minute)
Shape and Dimensions/Circuit Diagram
DFD-104P
DFD-104S
11 max.
2 8.5 max.
1
(ø0.5)
1
11 max.
Circuit diagram
3
2
(ø0.5)
Circuit diagram
2 8.5 max.
4
1
4
2
3
7.62±0.3
1
3
104S
4.0 min.
104P
16 max.
4
11 max.
3
7.62±0.3 4.0 min.
4
5.08±0.3
5.08±0.3
[mm]
Attenuation Characteristics
(Output Impedance and Input Impedance: 50)
80
Attenuation (dB)
70
60
104S
50
40
104P
30
20
10
0
10
100
Frequency (MHz)
DC Line Filters VOL.10
32
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
DIP Type
Tape and Reel Dimensions
SBT Series
Tape and Reel Dimensions
3.0 max.
1.0 max.
(18)
11 max.
32.2 max.
7.5 max.
12.7±1.0
18+2.0
–0
6.35±1.3
5.0±0.5
12.7±0.3
SNT Series
Tape and Reel Dimensions
9.5 max.
5.0 max. (S type)
+1.0
18 –0.5
+2.0
18–0
1.0 max. 11 max.
12.7 max.
12.7±1.0
5.0±0.5
12.7±0.3
DC Line Filters VOL.10
33
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
SMD Type
Common Mode Power Line
SBS9080 Series
[RoHS Compliant]
• Tape and Reel Dimensions (see page 44)
• Precautions (see page 43)
Model
Rated voltage
DC (V)
Rated current
DC (A)
SBS9080-509T
SBS9080-524T
50
50
5.0
5.0
• Withstanding voltage: 125V DC for one minute between lines
Inductance
(at 100KHz)
(μH) min.
0.9
2.4
DC resistance
(m/line)
max.
15
15
Operating
temperature range
(˚C)
–25 to +50
–25 to +50
• Insulation resistance: More than 10M (100V DC, between lines)
Shape and Dimensions
Circuit Diagram
2
3
4
(0.5)
5.4 max.
1
1
2
3
4
Recommended Land Pattern
8.0±0.2
9.7 max.
8.7 max.
3.0
(6.3)
9.0±0.2
3.0
(7.2)
3.0
(1.5)
(1.5)
4.0
[mm]
2.0
4.0
[mm]
Impedance vs. Frequency
10000
Impedance ()
1000
524T
509T
100
10
1
1
10
100
1000
Frequency (MHz)
DC Line Filters VOL.10
34
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
SMD Type
Common Mode Power Line
SBP Series
[RoHS Compliant]
• Tape and Reel Dimensions (see page 44)
• Precautions (see page43)
Model
Rated voltage
DC (V)
Rated current
DC (A)
SBP-5001T
50
5.0
• Withstanding voltage: 200V DC for one minute between lines
3
4
Operating
temperature range
(˚C)
–25 to +70
Circuit Diagram
5.9 max.
2
DC resistance
(m/line)
max.
7
• Insulation resistance: More than 10M (100V DC, between lines)
Shape and Dimensions
1
Impedance
(at 100MHz)
() min.
500
1
2
3
4
3.5
Recommended Land Pattern
(4.5)
8.2 max.
3.5
2.0
9.2 max.
4.5
[mm]
2.0
4.5
[mm]
Impedance vs. Frequency
Impedance ()
1000
100
10
1
1
10
100
1000
Frequency (MHz)
DC Line Filters VOL.10
35
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
SMD Type
Common Mode Power Line
DCM Series
[RoHS Compliant]
• Tape and Reel Dimensions (see page 46)
• Precautions (see page 43)
Model
Rated voltage
(V)
Rated current
(A)
L(μH)
min
Rdc(mΩ)
max
Type
DCM5-01
DCM5-02
DCM5-03
DCM5-04
50
50
50
50
0.2
0.5
1.0
2.0
2540
520
210
30
3180
510
180
30
EE5
EE5
EE5
EE5
●Inductance measurement condition : f = 10KHZ 0.1V ※●Insulation resistance : more than 100MΩ(250V DC, 1min, between lines) ●Operating temperature range(℃) : -20 to 110 (includes the selftemp. rise.)
Look : By number-of-turns adjustment, to products other than the above-mentioned characteristic is also possible, please consult.
●Common mode winding with section bobbin. ※●Withstanding voltase : 250V DC for one minute between lines.
Shape and Dimensions
DCM5 Series
7.3 max.
5
4
1
2
3
0.2
5.8 max.
7.0 max.
6
[mm]
0.5
Recommended Land Pattern
DCM5 Series
Circuit Diagram
DCM5 Series
3
1
4
6
9.3
(Top view)
5.9
1.7
1.3
1.85 1.85
[mm]
DC Line Filters VOL.10
36
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
SMD Type
Common Mode Power Line
Impedance vs. Frequency
100000
Common-mode
Normal-mode
DCM5-01
100000
10000
Impedance ()
Impedance ()
10000
DCM5-02
1000
100
10
1
1000
100
10
1
0.1
0.001
0.01
0.1
1
10
0.1
0.001
100
0.01
Frequency (MHz)
100000
DCM5-03
100000
1
10
100
DCM5-04
10000
Impedance ()
Impedance ()
10000
1000
100
10
1
0.1
0.001
0.1
Frequency (MHz)
1000
100
10
1
0.1
0.01
0.1
1
Frequency (MHz)
10
100
1
10
100
1000
Frequency (MHz)
DC Line Filters VOL.10
37
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
SMD Type
Common Mode Signal Line
EMC Chip Filters
M-500CT/M-600T Series
[RoHS Compliant]
• Tape and Reel Dimensions (see page 44-46)
• Precautions (see page 43)
M-500CT Series
Model
Rated voltage
DC (V)
Rated current
DC (A)
Impedance
() min.
M-521CT
M-522CT
M-523CT
M-524CT
M-532CT
M-538CT
M-542CT
M-543CT
50
50
50
80
50
50
50
50
1.0
1.0
1.5
0.5
0.5
0.1
0.5
1.0
Model
Rated voltage
DC (V)
Rated current
DC (A)
Impedance
() min.
DC resistance
(m) max.
M-608T
M-614T
M-620T
50
50
50
0.1
0.1
0.1
300 (at 100 MHz)
1000 (at 50 MHz)
1000 (at 30 MHz)
80
120
160
700
200
200
700
450
800
200
700
Operating
temperature range
(˚C)
–25 to +85
–25 to +85
–25 to +85
–25 to +85
–25 to +85
–25 to +70
–20 to +75
–25 to +85
DC resistance
(m) max.
(at 10 MHz)
(at 20 MHz)
(at 20 MHz)
(at 10 MHz)
(at 100 MHz)
(at 100 MHz)
(at 10 MHz)
(at 10 MHz)
100
100
65
100
90
220
120
100
M-600T Series
Operating
temperature range
(˚C)
–20 to +80
–20 to +80
–20 to +80
• Insulation resistance: more than 10M (100V DC, between lines)
Shape and Dimensions
5
3
4
2
5
3
4
(0.25)
5.6
(0.25)
4.2
(0.2)
5.5
9.0
5.6
9.0
6
4
5
1.2
1
8
2
7
3
6
4
5
1
3
608
2
4
Lot No.
5.6
9.0
tolerance±0.2
5.5
8.9
5.0 max.
(0.25)
6.0 max.
(0.25)
3.9
±0.2
3
M-608T, M-614T, M-620T
10.0
7
9.8
8
2
2.54 2.54 2.54
1
Lot No.
5.8
9.0
2.54 2.54 2.54
M-543CT
1.2
Lot No.
3.5
Lot No.
.
Lot No.
M-542CT
1.2
6
7.5
2
1
2.54 2.54
6
7.5
3
1
2.54 2.54
2
5.0
4
2.54
1
M-538CT
1.2
M-532CT
1.2
M-521CT, M-522CT, M-523CT, M-524CT
tolerance±0.2
(1.3)
(1.5)
9.7±0.5
3.0±0.3
6.0±0.2
[mm]
DC Line Filters VOL.10
38
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
SMD Type
Common Mode Signal Line
Circuit Diagram
M-521CT, M-522CT, M-523CT, M-524CT
1
4
2
M-542CT
M-532CT, M-538CT
1
6
2
5
3
4
3
M-543CT
1
8
2
7
3
6
4
5
1
8
2
7
3
6
4
5
M-608T, M-614T, M-620T
1
3
2
4
Recommended Land Pattern
M-608T, M-614T, M-620T
6.0
14
5.5
5.5
1.2
1.8
1.7
2.543
M-542CT, M-543CT
1.7
2.542
M-538CT, M-532CT
2.54
1.5
M-521CT, M-522CT
M-523CT, M-524CT
10
5.5
10
10
[mm]
Impedance vs. Frequency
M-500CT Series
10K
1K
M-542CT
M-532CT
100
M-600T Series
M-521CT, M-543CT
M-524CT
Impedance ()
Impedance ()
10K
M-522CT,
538CT
M-523CT
M-538CT
10
1K
620T
614T
608T
100
10
10
100
Frequency (MHz)
1000
10
100
1000
Frequency (MHz)
DC Line Filters VOL.10
39
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
SMD Type
Precautions
Shelf Life
Use within 6 months. If the product is used after a
storage period of 6 months or longer, confirm its
solderability before use.
Recommended Soldering Conditions
• Soldering irons:
Tip temperature: 350±5˚C
Duration of heat: approx. 4 seconds
• Flow soldering: not suitable
• Reflow soldering: Refer to the following
temperature profile.
• Standard thickness of cream Solder = 150μm ~
200μm.
Recommended reflow profile shown below are data
obtained from reflow equipment used at NEC TOKIN.
The Solderbility may differ greatly depending on
reflow equipment type, reflow condition, land
pattern area and the amount of cream Solder.
Please check the Solderbility thoroughly before
actual reflow operation.
Reflow Profile 1 (for SBP-5001T)
TEMP. (˚C)
230
210
150
80 to 120 sec.
25 sec. max.
Reflow Profile 2 (for lead-free type)
TEMP. (˚C)
250 }3
230
150 ‘180
90 }30
30 Max.
TIME(sec)
DC Line Filters VOL.10
40
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
SMD Type
Tape and Reel Dimensions
SBS9080 (1000pcs./reel)
Dimensions of indented square-hole plastic tape
P0
K
D0
[mm]
P2
A
T2
F
B
P1
W
E
T
A0
±0.3
9.5
B0
±0.3
10.3
W
±0.3
16
F
±0.1
7.5
E
±0.1
1.75
P1
±0.1
12
P2
±0.1
2.0
P0
±0.1
4.0
D0
+0.1, –0
1.5
T1
0.6>
=
0.6
T2
7.2>
=
7.2
K
7.0>
=
7.0
Forward direction
W2
[mm]
Reel dimensions
N
330
100
W1
±0.5
17.5
W2
25>
=
25
N
A
A
W1
SBP-5001T (1000pcs./reel)
Dimensions of indented square-hole plastic tape
P0
K
D0
[mm]
P2
F
B
A
±0.3
9.0
B
±0.3
9.0
W
±0.3
16
F
±0.1
7.5
E
±0.1
1.75
P1
±0.1
12
P2
±0.1
2.0
P0
±0.1
4.0
D0
+0.1, –0
1.5
T1
0.4>
=
0.4
T2
5.7>
=
5.7
K
5.8>
=
5.8
Forward direction
P1
A
T2
W
E
T
Reel dimensions
[mm]
W2
N
330
79
W1
+6, –0
16
W2
25>
=
25
A
N
A
W1
M-521CT/M-522CT/M-523CT/M-524CT (conforms to EIAJ RC-1009) (1500pcs./reel)
Dimensions of indented square-hole plastic tape
T1
Sprocket hole
[mm]
Indented square-hole for fitting chips
øD0
F
A
±0.3
5.3
B
±0.3
9.5
W
±0.3
16
F
±0.1
7.5
E
±0.1
1.75
P1
±0.1
8.0
P2
±0.1
2.0
P0
±0.1
4.0
D0
+0.1, –0
1.5
T1
max.
0.6
T2
max.
6.5
K
max.
6.4
B
B
W
E
K
P1
A
T2
P2
P0
Forward direction
Chip fitted on square-hole
W1
Reel dimensions
[mm]
A
±3.0
330
B
±2.0
79
C
±0.2
13
D
±0.8
21
E
±0.5
2.0
r
—
1.0
W1
max.
25
W2
+6, – 0
16
B
E
C
D
r
A
W2
DC Line Filters VOL.10
41
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
SMD Type
M-532CT (conforms to EIAJ RC-1009) (1000pcs./reel)
Dimensions of indented square-hole plastic tape
T1
Sprocket hole
[mm]
Indented square-hole for fitting chips
øD0
F
A
±0.3
7.9
B
±0.3
9.4
W
±0.3
16.0
F
±0.1
7.5
E
±0.1
1.75
P1
±0.1
12.0
P2
±0.1
2.0
P0
±0.1
4.0
D0
+0.1, –0
1.5
T1
max.
0.6
T2
max.
6.9
K
max.
6.8
B
B
W
E
K
P1
A
T2
P2
P0
Forward direction
Chip fitted on square-hole
W1
Reel dimensions
[mm]
A
±3.0
330
B
±2.0
80
C
±0.2
13.0
D
±0.8
21.0
E
±0.5
2.0
r
—
1.0
W1
max.
25.0
W2
+6, – 0
16.0
B
E
C
D
r
W2
A
M-538CT (conforms to EIAJ RC-1009) (1500pcs./reel)
Dimensions of indented square-hole plastic tape
T1
Sprocket hole
[mm]
Indented square-hole for fitting chips
øD0
F
A
±0.3
7.9
B
±0.3
9.4
W
±0.3
16.0
F
±0.1
7.5
E
±0.1
1.75
P1
±0.1
12.0
P2
±0.1
2.0
P0
±0.1
4.0
D0
+0.1, –0
1.5
T1
max.
0.6
T2
max.
4.6
K
max.
4.5
B
B
W
E
K
P1
A
T2
P2
P0
Forward direction
Chip fitted on square-hole
W1
Reel dimensions
[mm]
A
±3.0
330
C
±0.2
13.0
D
±0.8
21.0
E
±0.5
2.0
r
—
1.0
W1
max.
25.0
W2
+6, – 0
16.0
B
E
C
B
±2.0
80
D
r
W2
A
M-542CT (conforms to EIAJ RC-1009) (1000pcs./reel)
Dimensions of indented square-hole plastic tape
T1
Sprocket hole
[mm]
Indented square-hole for fitting chips
øD0
F
A
±0.3
9.5
B
±0.3
10.5
W
±0.3
16.0
F
±0.1
7.5
E
±0.1
1.75
P1
±0.1
12.0
P2
±0.1
2.0
P0
±0.1
4.0
D0
+0.1, –0
1.5
T1
max.
0.6
T2
max.
7.2
K
max.
7.0
B
B
W
E
K
P1
A
T2
P2
P0
Forward direction
Chip fitted on square-hole
W1
Reel dimensions
[mm]
A
±3.0
330
C
±0.2
13.0
D
±0.8
21.0
E
±0.5
2.0
r
—
1.0
W1
max.
25.0
W2
+6, – 0
17.5±0.5
B
E
C
B
±2.0
100
D
r
A
W2
DC Line Filters VOL.10
42
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
SMD Type
M-608T/M-614T/M-620T (conforms to EIAJ RC-1009) (1500pcs./reel)
Dimensions of indented square-hole plastic tape
T1
Sprocket hole
[mm]
Indented square-hole for fitting chips
øD0
F
A
±0.3
6.4
B
±0.3
10.2
W
±0.3
16.0
F
±0.1
7.5
E
±0.1
1.75
P1
±0.1
8.0
P2
±0.1
2.0
P0
D0
T1
±0.1 +0.1, – 0 max.
4.0
1.5
0.6
T2
max.
6.5
K
max.
6.4
B
B
W
E
K
P1
A
T2
P2
Forward direction
P0
Chip fitted on square-hole
W1
Reel dimensions
[mm]
A
±3.0
330
B
±2.0
79
C
±0.2
13.0
D
±0.8
21.0
E
±0.5
2.0
r
—
1.0
W1
max.
25.0
W2
+6, – 0
16.0
G
5.2
H
0.38±0.05
B
E
C
D
r
W2
A
DCM5 Series(2000pcs. /reel)
Dimensions of indented square-hole plastic tape
±0.05
4
±0.1
±0.1
F
2
[mm]
Model
16±0.3
B
8
C
6.3
D
8.3
E
7.5
F
1.75
A
E
DCM5 Series
‘
B
H
C
D
G
DC Line Filters VOL.10
43
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
DC Line Filters VOL.10
44
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
June 2011.
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9634DCLVOL10E1106E2
Similar pages