38D2 Group Standard Characteristics M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP Standard Characteristics Example Standard characteristics described below are just examples of the 38D2 Group's characteristics and are not guaranteed. For rated values, refer to "38D2 Group Data sheet". (1) Power Source Current Standard Characteristics Example (Vcc-Icc) When system is operating in frequency/2 mode (ceramic oscillation, Ta = 25 °C, output transistor is in the cut-off state) A/D conversion not executed 7.0 f(XIN) = 12 MHz f(XIN) = 8 MHz Power Source Current Icc [mA] 6.0 f(XIN) = 4 MHz f(XIN) = 2 MHz 5.0 4.0 3.0 2.0 1.0 0.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Power Source Voltage Vcc [V] Fig. 1. Vcc-Icc (frequency/2 mode) When system is operating in frequency/4 mode (ceramic oscillation, Ta = 25 °C, output transistor is in the cut-off state) A/D conversion not executed 7.0 f(XIN) f(XIN) f(XIN) f(XIN) f(XIN) Power Source Current Icc [mA] 6.0 = 16 MHz = 12 MHz = 8 MHz = 4 MHz = 2 MHz 5.0 4.0 3.0 2.0 1.0 0.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Power Source Voltage Vcc [V] Fig. 2. Vcc-Icc (frequency/4 mode) When system is operating in frequency/8 mode (ceramic oscillation, Ta = 25 °C, output transistor is in the cut-off state) A/D conversion not executed 7.0 f(XIN) f(XIN) f(XIN) f(XIN) f(XIN) Power Source Current Icc [mA] 6.0 = 16 MHz = 12 MHz = 8 MHz = 4 MHz = 2 MHz 5.0 4.0 3.0 2.0 1.0 0.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Power Source Voltage Vcc [V] Fig. 3. Vcc-Icc (frequency/8 mode) REJ99B1154-0200 ©2007. Renesas Technology Corp., All rights reserved. November 2007 Page 1 of 26 38D2 Group Standard Characteristics M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP At WIT instruction executed (ceramic oscillation, Ta = 25 °C, output transistor is in the cut-off state) 3.0 f(XIN) f(XIN) f(XIN) f(XIN) f(XIN) Power Source Current Icc [mA] 2.5 = 16 MHz = 12 MHz = 8 MHz = 4 MHz = 2 MHz 2.0 1.5 1.0 0.5 0.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 5.0 5.5 Power Source Voltage Vcc [V] Fig. 4. Vcc-Icc (at WIT instruction executed) At STP instruction executed (Ta = 25 °C, output transistor is in the cut-off state) 30 Power Source Current Icc [nA] 27 24 21 18 15 12 9 6 3 0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 Power Source Voltage Vcc [V] Fig. 5. Vcc-Icc (at STP instruction executed) REJ99B1154-0200 ©2007. Renesas Technology Corp., All rights reserved. November 2007 Page 2 of 26 38D2 Group Standard Characteristics M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP At 12 MHz frequency/2, increment at A/D conversion executed (ceramic oscillation, Ta = 25 °C, output transistor is in the cut-off state) 7.0 A/D conversion executed A/D conversion not executed Power Source Current Icc [mA] 6.0 5.0 4.0 3.0 2.0 1.0 0.0 1.5 2 2.5 3 3.5 4 4.5 5 5.5 Power Source Voltage Vcc [V] Fig. 6. Vcc-Icc (increment at A/D conversion executed) At 16 MHz frequency/4 mode, increment at A/D conversion executed (ceramic oscillation, Ta = 25 °C, output transistor is in the cut-off state) 7.0 A/D conversion executed A/D conversion not executed Power Source Current Icc [mA] 6.0 5.0 4.0 3.0 2.0 1.0 0.0 1.5 2 2.5 3 3.5 4 4.5 5 5.5 Power Source Voltage Vcc [V] Fig. 7. Vcc-Icc (increment at A/D conversion executed) At 16 MHz frequency/8 mode, increment at A/D conversion executed (ceramic oscillation, Ta = 25 °C, output transistor is in the cut-off state) 7.0 A/D conversion executed A/D conversion not executed Power Source Current Icc [mA] 6.0 5.0 4.0 3.0 2.0 1.0 0.0 1.5 2 2.5 3 3.5 4 4.5 5 5.5 Power Source Voltage Vcc [V] Fig. 8. Vcc-Icc (increment at A/D conversion executed) REJ99B1154-0200 ©2007. Renesas Technology Corp., All rights reserved. November 2007 Page 3 of 26 38D2 Group Standard Characteristics M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP When system is operating in low-speed mode (crystal oscillation, ceramic oscillation stop, Ta = 25 °C, output transistor is in the cut-off state) A/D conversion not executed f(XCIN) = 32.768 kHz Power Source Current Icc [μA] 25 20 15 10 5 0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Power Source Voltage Vcc [V] Fig. 9. Vcc-Icc (low-speed mode) At WIT instruction executed (crystal oscillation, ceramic oscillation stop, Ta = 25 °C, output transistor is in the cut-off state) f(XCIN) = 32.768 kHz Power Source Current Icc [μA] 10 8 6 4 2 0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Power Source Voltage Vcc [V] Fig. 10. Vcc-Icc (at WIT instruction executed) REJ99B1154-0200 ©2007. Renesas Technology Corp., All rights reserved. November 2007 Page 4 of 26 38D2 Group Standard Characteristics M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP When system is operating in on-chip oscillator mode (external oscillation stop, output transistor is in the cut-off state) A/D conversion not executed 450 Ta = -20 °C Ta = 25 °C 400 Power Source Current Icc [μA] Ta = 85°C 350 300 250 200 150 100 50 0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Power Source Voltage Vcc [V] Fig. 11. Vcc-Icc (on-chip oscillator mode) On-chip oscillator operating mode, at WIT instruction executed (external oscillation stop, output transistor is in the cut-off state) 450 Ta = -20 °C Ta = 25 °C 400 Power Source Current Icc [μA] Ta = 85°C 350 300 250 200 150 100 50 0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Power Source Voltage Vcc [V] Fig. 12. Vcc-Icc (on-chip oscillator mode at WIT instruction executed) REJ99B1154-0200 ©2007. Renesas Technology Corp., All rights reserved. November 2007 Page 5 of 26 38D2 Group Standard Characteristics M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP (2) Power Supply Current Standard Characteristics Example (f(XIN) -Icc) When system is operating in frequency/2 mode (ceramic oscillation, Ta = 25 °C, output transistor is in the cut-off state) A/D conversion not executed 7.0 Vcc = 5.0V Vcc =3.0V Power Source Current Icc [mA] 6.0 5.0 4.0 3.0 2.0 1.0 0.0 0 2 4 6 8 10 12 14 16 Oscillation Frequency f(XIN) [ MHz] Fig. 13. f(XIN) -Icc (frequency/2 mode) When system is operating in frequency/4 mode (ceramic oscillation, Ta = 25 °C, output transistor is in the cut-off state) A/D conversion not executed 7.0 Vcc = 5.0V Vcc =3.0V Power Source Current Icc [mA] 6.0 5.0 4.0 3.0 2.0 1.0 0.0 0 2 4 6 8 10 12 14 16 Oscillation Frequency f(XIN) [ MHz] Fig. 14. f(XIN) -Icc (frequency/4 mode) When system is operating in frequency/8 mode (ceramic oscillation, Ta = 25 °C, output transistor is in the cut-off state) A/D conversion not executed 7.0 Vcc = 5.0V Vcc =3.0V Power Source Current Icc [mA] 6.0 5.0 4.0 3.0 2.0 1.0 0.0 0 2 4 6 8 10 12 14 16 Oscillation Frequency f(XIN) [ MHz] Fig. 15. f(XIN) -Icc (frequency/8 mode) REJ99B1154-0200 ©2007. Renesas Technology Corp., All rights reserved. November 2007 Page 6 of 26 38D2 Group Standard Characteristics M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP At WIT instruction executed (ceramic oscillation, Ta = 25 °C, output transistor is in the cut-off state) 3.0 Vcc = 5.0V Vcc =3.0V Power Source Current Icc [mA] 2.5 2.0 1.5 1.0 0.5 0.0 0 2 4 6 8 10 12 14 16 Oscillation Frequency f(XIN) [ MHz] Fig. 16. f(XIN) -Icc (at WIT instruction executed) (3) Power Supply Current Standard Characteristics Example (Ta-Icc) When system is operating in on-chip oscillator mode (external oscillation stop, output transistor is in the cut-off state) A/D conversion not executed 450 Vcc = 5.0V Vcc =3.0V Power Source Current Icc [μA] 400 350 300 250 200 150 100 50 0 -40 -20 0 20 40 60 80 100 Operating Temperature Range Ta [°C] Fig. 17. Ta-Icc (on-chip oscillator mode) On-chip oscillator operating mode at WIT instruction executed (external oscillation stop, output transistor is in the cut-off state) 450 Vcc = 5.0V Vcc =3.0V Power Source Current Icc [μA] 400 350 300 250 200 150 100 50 0 -40 -20 0 20 40 60 80 100 Operating Temperature Range Ta [°C] Fig. 18. Ta-Icc (on-chip oscillator mode at WIT instruction executed) REJ99B1154-0200 ©2007. Renesas Technology Corp., All rights reserved. November 2007 Page 7 of 26 38D2 Group Standard Characteristics M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP (4) Port Standard characteristics Example (VOH-IOH) VOH-IOH (Vcc = 5.5 V, Ports P00-P07,P10-P17,P20-P27) -50 "H" Output Current IOH [mA] -40 Ta = -20 °C Ta = 25 °C -30 Ta = 85 °C -20 -10 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 "H" Output Voltage VOH [V] Fig. 19. VOH-IOH (Vcc = 5.5 V, Ports P00-P07,P10-P17,P20-P27) VOH-IOH (Vcc = 4.0 V, Ports P00-P07,P10-P17,P20-P27) -30 "H" Output Current IOH [mA] -25 Ta = -20 °C -20 Ta = 25 °C Ta = 85 °C -15 -10 -5 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 "H" Output Voltage VOH [V] Fig. 20. VOH-IOH (Vcc = 4.0 V, Ports P00-P07,P10-P17,P20-P27) VOH-IOH (Vcc = 2.5 V, Ports P00-P07,P10-P17,P20-P27) -12 "H" Output Current IOH [mA] -10 -8 Ta = -20 °C Ta = 25 °C Ta =85 °C -6 -4 -2 0 0.0 0.5 1.0 1.5 2.0 2.5 "H" Output Voltage VOH [V] Fig. 21. VOH-IOH (Vcc = 2.5 V, Ports P00-P07,P10-P17,P20-P27) REJ99B1154-0200 ©2007. Renesas Technology Corp., All rights reserved. November 2007 Page 8 of 26 38D2 Group Standard Characteristics M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP VOH-IOH (Vcc = 5.5 V, Ports P40-P47,P50-P57,P60-P62) -50 Ta = -20 °C "H" Output Current IOH [mA] -40 Ta = 25 °C Ta = 85 °C -30 -20 -10 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 "H" Output Voltage VOH [V] Fig. 22. VOH-IOH (Vcc = 5.5 V, Ports P40-P47,P50-P57,P60-P62) VOH-IOH (Vcc = 4.0 V, Ports P40-P47,P50-P57,P60-P62) -30 "H" Output Current IOH [mA] -25 Ta = -20 °C Ta = 25 °C -20 Ta = 85 °C -15 -10 -5 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 "H" Output Voltage VOH [V] Fig. 23. VOH-IOH (Vcc = 4.0 V, Ports P40-P47,P50-P57,P60-P62) VOH-IOH (Vcc = 2.5 V, Ports P40-P47,P50-P57,P60-P62) -12 "H" Output Current IOH [mA] -10 -8 Ta = -20 °C Ta = 25 °C Ta = 85 °C -6 -4 -2 0 0.0 0.5 1.0 1.5 2.0 2.5 "H" Output Voltage VOH [V] Fig. 24. VOH-IOH (Vcc = 2.5 V, Ports P40-P47,P50-P57,P60-P62) REJ99B1154-0200 ©2007. Renesas Technology Corp., All rights reserved. November 2007 Page 9 of 26 38D2 Group Standard Characteristics M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP (5) Port Standard Characteristics Example (VOL-IOL) VOL-IOL (Vcc = 5.5 V, Ports P00-P07,P10-P17,P20-P27) 75 70 65 "L" Output Current IOL [mA] 60 55 50 45 Ta =- 20 °C Ta = 25 °C Ta = 85 °C 40 35 30 25 20 15 10 5 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 "L" Output Voltage VOL [V] Fig. 25. VOL-IOL (Vcc = 5.5 V, Ports Ports P30-P37,P52,P53) VOL-IOL (Vcc = 4.0 V, Ports P00-P07,P10-P17,P20-P27) 50 45 "L" Output Current IOL [mA] 40 35 30 Ta = -20 °C Ta = 25 °C Ta = 85 °C 25 20 15 10 5 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 "L" Output Voltage VOL [V] Fig. 26. VOL-IOL (Vcc = 4.0 V, Ports P00-P07,P10-P17,P20-P27) VOL-IOL (Vcc = 2.5 V, Ports P00-P07,P10-P17,P20-P27) 20 18 "L" Output Current IOL [mA] 16 14 12 Ta = -20 °C Ta = 25 °C 10 Ta =85 °C 8 6 4 2 0 0.0 0.5 1.0 1.5 2.0 2.5 "L" Output Voltage VOL [V] Fig. 27. VOL-IOL (Vcc = 2.5 V, Ports P00-P07,P10-P17,P20-P27) REJ99B1154-0200 ©2007. Renesas Technology Corp., All rights reserved. November 2007 Page 10 of 26 38D2 Group Standard Characteristics M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP VOL-IOL (Vcc = 5.5 V,Ports P30-P37,P52,P53) 75 Ta =- 20 °C 70 "L" Output Current IOL [mA] 65 60 Ta = 25 °C 55 Ta = 85 °C 50 45 40 35 30 25 20 15 10 5 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 "L" Output Voltage VOL [V] Fig. 28. VOL-IOL (Vcc = 5.5 V, Ports P30-P37,P52,P53) VOL-IOL (Vcc = 4.0 V, Ports P30-P37,P52,P53) 50 Ta = -20 °C 45 "L" Output Current IOL [mA] 40 Ta = 25 °C Ta = 85 °C 35 30 25 20 15 10 5 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 "L" Output Voltage VOL [V] Fig. 29. VOL-IOL (Vcc = 4.0 V, Ports P30-P37,P52,P53) VOL-IOL (Vcc = 2.5 V, Ports P30-P37,P52,P53) 20 Ta = -20 °C 18 Ta = 25 °C "L" Output Current IOL [mA] 16 Ta = 85 °C 14 12 10 8 6 4 2 0 0.0 0.5 1.0 1.5 2.0 2.5 "L" Output Voltage VOL [V] Fig. 30. VOL-IOL (Vcc = 2.5 V, Ports P30-P37,P52,P53) REJ99B1154-0200 ©2007. Renesas Technology Corp., All rights reserved. November 2007 Page 11 of 26 38D2 Group Standard Characteristics M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP VOL-IOL (Vcc = 5.5 V, Ports P40-P47,P50,P51,P54-P57,P60-P62) 75 Ta =- 20 °C 70 65 Ta = 25 °C "L" Output Current IOL [mA] 60 Ta = 85 °C 55 50 45 40 35 30 25 20 15 10 5 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 "L" Output Voltage VOL [V] Fig. 31. VOL-IOL (Vcc = 5.5 V, Ports P40-P47,P50,P51,P54-P57,P60-P62) VOL-IOL (Vcc = 4.0 V, Ports P40-P47, P51-P57, P60, P61,P62) 50 Ta = -20 °C Ta = 25 °C "L" Output Current IOL [mA] 40 Ta = 85 °C 30 20 10 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 "L" Output Voltage VOL [V] Fig. 32. VOL-IOL (Vcc = 4.0 V, Ports P40-P47,P50,P51,P54-P57,P60-P62) VOL-IOL (Vcc = 2.5 V, Ports P40-P47,P50,P51,P54-P57,P60-P62) 20 Ta = -20 °C Ta = 25 °C "L" Output Current IOL [mA] 16 Ta = 85 °C 12 8 4 0 0.0 0.5 1.0 1.5 2.0 2.5 "L" Output Voltage VOL [V] Fig. 33. VOL-IOL (Vcc = 2.5 V, Ports P40-P47,P50,P51,P54-P57,P60-P62) REJ99B1154-0200 ©2007. Renesas Technology Corp., All rights reserved. November 2007 Page 12 of 26 38D2 Group Standard Characteristics M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP (6) Port Standard Characteristics Example (Vcc-IIL) Vcc-IIL (Ports P00-P07, P10-P17, P20-P27 when connecting pull-up transistor) (clerical error revised in rev.2.00) -180 Ta = -20 °C Ta = 25 °C -160 Ta = 85°C "L" Input Current IIL [μA] -140 -120 -100 -80 -60 -40 -20 0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Power Source Voltage Vcc [V] Fig. 34. Vcc-IIL (when connecting pull-up transistor) Vcc-IIL (Ports P30-P37, P40-P47, P50-P57, P60-P62 when connecting pull-up transistor) -180 Ta = -20 °C Ta = 25 °C "L" Input Current IIL [μA] -160 Ta = 85°C -140 -120 -100 -80 -60 -40 -20 0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Power Source Voltage Vcc [V] Fig. 35. Vcc-IIL (when connecting pull-up transistor) REJ99B1154-0200 ©2007. Renesas Technology Corp., All rights reserved. November 2007 Page 13 of 26 38D2 Group Standard Characteristics M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP (7) Port Standard Characteristics Example (Vcc-VIHL) Vcc-VIHL (I/O Ports (CMOS) , Ta = 25 °C, Ports P04-P07, P10-P17, P20-P27, P30, P32, P35, P36, P40-P47, P52, P53, P61, P62) 5 Input Voltage VIHL [V] 4 3 2 1 0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Power Source Voltage Vcc [V] Fig. 36. Vcc-VIHL (I/O Port (CMOS) ) Vcc-VIHL (I/O Ports (CMOS) , Ta = 25 °C, Ports P00-P03, P31,P33, P34, P37, P50, P51, P54-P57, P60) 5 "H" input voltage <VIH> "L" input voltage <VIL> Input Voltage VIHL [V] 4 3 2 1 0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Power Source Voltage Vcc [V] Fig. 37. Vcc-VIHL (I/O Port (CMOS) ) REJ99B1154-0200 ©2007. Renesas Technology Corp., All rights reserved. November 2007 Page 14 of 26 38D2 Group Standard Characteristics M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP Vcc-VIHL (RESET pin, Ta = 25 °C) 5 "H" input voltage <VIH> "L" input voltage <VIL> Input Voltage VIHL [V] 4 3 2 1 0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 4.5 5.0 5.5 Power Source Voltage Vcc [V] Fig. 38. Vcc-VIHL (RESET pin) Vcc-VIHL (XIN pin, Ta = 25 °C) 5 Input Voltage VIHL [V] 4 3 2 1 0 1.5 2.0 2.5 3.0 3.5 4.0 Power Source Voltage Vcc [V] Fig. 39. Vcc-VIHL (XIN pin) REJ99B1154-0200 ©2007. Renesas Technology Corp., All rights reserved. November 2007 Page 15 of 26 38D2 Group Standard Characteristics M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP Vcc-HYS (RESET pin, Ta = 25 °C) 1.0 Hysteresis HYS [V] 0.8 0.6 0.4 0.2 0.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 4.5 5.0 5.5 4.5 5.0 5.5 Power Source Voltage Vcc [V] Fig. 40. Vcc-HYS (RESET pin) Vcc-HYS (SIO function pin (RXD, SCLK) , Ta = 25 °C) 1.0 Hysteresis HYS [V] 0.8 0.6 0.4 0.2 0.0 1.5 2.0 2.5 3.0 3.5 4.0 Power Source Voltage Vcc [V] Fig. 41. Vcc-HYS (SIO function pin) Vcc-HYS (INT0- INT2, CNTR0, CNTR1, KW0-KW7, Ta = 25 °C) 1.0 Hysteresis HYS [V] 0.8 0.6 0.4 0.2 0.0 1.5 2.0 2.5 3.0 3.5 4.0 Power Source Voltage Vcc [V] Fig. 42. Vcc-HYS (INT0- INT2, CNTR0, CNTR1, KW0-KW7) REJ99B1154-0200 ©2007. Renesas Technology Corp., All rights reserved. November 2007 Page 16 of 26 38D2 Group Standard Characteristics M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP (8) Port Standard Characteristics Example (VIN-IIA, A/D conversion mode = 10bit ) VIN-IIA (A/D converter operation, f(Xin) = 12 MHz, frequency/2 mode, A/D conversion clock = f(Xin), Vcc = VREF = 5.5 V, Ta = 25 °C ) 2.0 1.5 Input Current IIA [μA] 1.0 0.5 0.0 -0.5 -1.0 -1.5 -2.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Input Voltage VIN [V] Fig. 43. VIN-IIA (f(Xin) = 12 MHz frequency/2 mode ) VIN-IIA (A/D converter operation, f(Xin) = 10 MHz, frequency/2 mode, A/D conversion clock = f(Xin), Vcc = VREF = 5.5 V, Ta = 25 °C ) 2.0 1.5 Input Current IIA [μA] 1.0 0.5 0.0 -0.5 -1.0 -1.5 -2.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Input Voltage VIN [V] Fig. 44. VIN-IIA (f(Xin) = 10 MHz frequency/2 mode ) VIN-IIA (A/D converter operation, f(Xin) = 8 MHz, frequency/2 mode, A/D conversion clock = f(Xin), Vcc = VREF = 5.5 V, Ta = 25 °C ) 2.0 1.5 Input Current IIA [μA] 1.0 0.5 0.0 -0.5 -1.0 -1.5 -2.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Input Voltage VIN [V] Fig. 45. VIN-IIA (f(Xin) = 8 MHz frequency/2 mode ) REJ99B1154-0200 ©2007. Renesas Technology Corp., All rights reserved. November 2007 Page 17 of 26 38D2 Group Standard Characteristics M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP VIN-IIA (A/D converter operating, f(Xin) = 4 MHz, frequency/2 mode, A/D conversion clock = f(Xin), Vcc = VREF = 5.5 V, Ta = 25 °C ) 1.0 0.8 Input Current IIA [μA] 0.6 0.4 0.2 0.0 -0.2 -0.4 -0.6 -0.8 -1.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Input Voltage VIN [V] Fig. 46. VIN-IIA (f(Xin) = 4 MHz frequency/2 mode ) VIN-IIA (A/D converter operating, f(Xin) = 2 MHz, frequency/2 mode, A/D conversion clock = f(Xin), Vcc = VREF =5.5 V, Ta = 25 °C ) 0.5 0.4 Input Current IIA [μA] 0.3 0.2 0.1 0.0 -0.1 -0.2 -0.3 -0.4 -0.5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Input Voltage VIN [V] Fig. 47. VIN-IIA (f(Xin) = 2 MHz frequency/2 mode ) REJ99B1154-0200 ©2007. Renesas Technology Corp., All rights reserved. November 2007 Page 18 of 26 38D2 Group Standard Characteristics M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP (9) On-chip Oscillator Frequency Characteristics Example On-chip oscillator frequency characteristics (Vcc-OCO) On-chip oscillator frequency OCO [ kHz] 8000 Ta = -20 °C Ta = 25 °C 7000 Ta = 85 °C 6000 5000 4000 3000 2000 1000 0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 Power Source Voltage Vcc [V] Fig. 48. Vcc-OCO On-chip oscillator frequency characteristics (Ta-OCO) On-chip oscillator frequency OCO [ kHz] 8000 Vcc = 5.0V Vcc =3.0V 7000 6000 5000 4000 3000 2000 1000 0 -40 -20 0 20 40 60 80 100 Temperature [°C] Fig. 49. Ta-OCO REJ99B1154-0200 ©2007. Renesas Technology Corp., All rights reserved. November 2007 Page 19 of 26 38D2 Group Standard Characteristics M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP (10) A/D Conversion Accuracy Characteristics A/D conversion accuracy standard characteristics example-1 A/D CONVERTER STEP WIDTH MEASUREMENT • Temp. = 25[°C] • CPU mode = frequency/2 mode • A/D conversion clock = f(XIN) /2 • Vcc = 5.12[V] • VREF = 5.12[V] • f(XIN) = 12[MHz] • 1LSB Width = 5.12[V] / 1024 = 5[mV] • A/D conversion mode = 10bit 15.0 1LSB Width Error Absolute accuracy [mV] 10.0 5.0 1LSB 0.0 -5.0 Error -10.0 -15.0 0 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 256 400 416 432 448 464 480 496 512 656 672 688 704 720 736 752 768 912 928 944 960 976 992 1008 1024 Conversion value 15.0 Absolute accuracy [mV] 10.0 5.0 0.0 -5.0 -10.0 -15.0 256 272 288 304 320 336 352 368 384 Conversion value 15.0 Absolute accuracy [mV] 10.0 5.0 0.0 -5.0 -10.0 -15.0 512 528 544 560 576 592 608 624 640 Conversion value 15.0 Absolute accuracy [mV] 10.0 5.0 0.0 -5.0 -10.0 -15.0 768 784 800 816 832 848 864 880 896 Conversion value Fig. 50. A/D conversion accuracy standard characteristics example-1 REJ99B1154-0200 ©2007. Renesas Technology Corp., All rights reserved. November 2007 Page 20 of 26 38D2 Group Standard Characteristics M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP A/D conversion accuracy standard characteristics example-2 A/D CONVERTER STEP WIDTH MEASUREMENT • Vcc = 5.12[V] • VREF = 5.12[V] • f(XIN) = 12[MHz] • 1LSB Width = 5.12[V] / 1024 = 5[mV] • Temp. = 25[°C] • CPU mode = frequency/2 mode • A/D conversion clock = f(XIN) /8 • A/D conversion mode = 10bit 15.0 1LSB Width Error Absolute accuracy [mV] 10.0 5.0 1LSB Width 0.0 -5.0 Error -10.0 -15.0 0 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 256 400 416 432 448 464 480 496 512 656 672 688 704 720 736 752 768 912 928 944 960 976 992 1008 1024 Conversion value 15.0 Absolute accuracy [mV] 10.0 5.0 0.0 -5.0 -10.0 -15.0 256 272 288 304 320 336 352 368 384 Conversion value 15.0 Absolute accuracy [mV] 10.0 5.0 0.0 -5.0 -10.0 -15.0 512 528 544 560 576 592 608 624 640 Conversion value Absolute accuracy [LSB] 15.0 10.0 5.0 0.0 -5.0 -10.0 -15.0 768 784 800 816 832 848 864 880 896 Conversion value Fig. 51. A/D conversion accuracy standard characteristics example-2 REJ99B1154-0200 ©2007. Renesas Technology Corp., All rights reserved. November 2007 Page 21 of 26 38D2 Group Standard Characteristics M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP A/D conversion accuracy standard characteristics example-3 A/D CONVERTER STEP WIDTH MEASUREMENT • Vcc = 5.12[V] • VREF = 5.12[V] • f(XIN) = 12[MHz] • 1LSB Width = 5.12[V] / 256 = 20[mV] • Temp. = 25[°C] • CPU mode = frequency/2 mode • A/D conversion clock = f(XIN)/2 • A/D conversion mode = 8bit 60.0 1LSB Width Error Absolute accuracy [mV] 40.0 20.0 1LSB Width 0.0 Error -20.0 -40.0 -60.0 0 16 32 48 64 80 96 208 224 112 128 Conversion value 60.0 Absolute accuracy [mV] 40.0 20.0 0.0 -20.0 -40.0 -60.0 128 144 160 176 192 240 256 Conversion value Fig. 52. A/D conversion accuracy standard characteristics example-3 REJ99B1154-0200 ©2007. Renesas Technology Corp., All rights reserved. November 2007 Page 22 of 26 38D2 Group Standard Characteristics M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP A/D conversion accuracy standard characteristics example-4 A/D CONVERTER STEP WIDTH MEASUREMENT • Vcc = 5.12[V] • VREF = 5.12[V] • f(XIN) = 12[MHz] • 1LSB Width = 5.12[V] / 256 = 20[mV] • Temp. = 25[°C] • CPU mode = frequency/2 mode • A/D conversion clock = f(XIN) /8 • A/D conversion mode = 8bit 60.0 1LSB Width Error Absolute accuracy [mV] 40.0 20.0 1LSB Width 0.0 Error -20.0 -40.0 -60.0 0 16 32 48 64 80 96 208 224 112 128 Conversion value 60.0 Absolute accuracy [mV] 40.0 20.0 0.0 -20.0 -40.0 -60.0 128 144 160 176 192 240 256 Conversion value Fig. 53. A/D conversion accuracy standard characteristics example-4 REJ99B1154-0200 ©2007. Renesas Technology Corp., All rights reserved. November 2007 Page 23 of 26 38D2 Group Standard Characteristics M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP A/D conversion accuracy standard characteristics example-5 A/D CONVERTER STEP WIDTH MEASUREMENT • Vcc = 1.8[V] • VREF = 1.8[V] • OCO • 1LSB Width = 1.8[V] / 1024 = 1.76[mV] • Temp. = 25[°C] • CPU mode = OCO • A/D conversion clock = OCO • A/D conversion mode = 10bit 5.28 1LSB Width Error Absolute accuracy [mV] 3.52 1.76 1LSB Width 0.00 -1.76 Error -3.52 -5.28 0 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 256 400 416 432 448 464 480 496 512 656 672 688 704 720 736 752 768 912 928 944 960 976 992 1008 1024 Conversion value 5.28 Absolute accuracy [mV] 3.52 1.76 0.00 -1.76 -3.52 -5.28 256 272 288 304 320 336 352 368 384 Conversion value 5.28 Absolute accuracy [mV] 3.52 1.76 0.00 -1.76 -3.52 -5.28 512 528 544 560 576 592 608 624 640 Conversion value 5.28 Absolute accuracy [mV] 3.52 1.76 0.00 -1.76 -3.52 -5.28 768 784 800 816 832 848 864 880 896 Conversion value Fig. 54. A/D conversion accuracy standard characteristics example-5 REJ99B1154-0200 ©2007. Renesas Technology Corp., All rights reserved. November 2007 Page 24 of 26 38D2 Group Standard Characteristics M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP A/D conversion accuracy standard characteristics example-6 A/D CONVERTER STEP WIDTH MEASUREMENT • Vcc = 1.8[V] • VREF = 1.8[V] • OCO • 1LSB Width = 1.8[V] / 256 = 7.03[mV] • Temp. = 25[°C] • CPU mode = OCO • A/D conversion clock = OCO • A/D conversion mode = 8bit 21.09 1LSB Width Error Absolute accuracy [mV] 14.06 7.03 1LSB Width 0.00 Error -7.03 -14.06 -21.09 0 16 32 48 64 80 96 112 128 208 224 240 256 Conversion value 21.09 Absolute accuracy [mV] 14.06 7.03 0.00 -7.03 -14.06 -21.09 128 144 160 176 192 Conversion value Fig. 55. A/D conversion accuracy standard characteristics example-6 REJ99B1154-0200 ©2007. Renesas Technology Corp., All rights reserved. November 2007 Page 25 of 26 38D2 Group Standard Characteristics M38D29GF-XXXFP/HP,M38D29GC-XXXFP/HP,M38D28G8-XXXFP/HP,M38D24G6-XXXFP/HP,M38D24G4-XXXFP/HP M38D29GFFP/HP,M38D29GCFP/HP,M38D28G8FP/HP,M38D24G6FP/HP,M38D24G4FP/HP (11) Icc increment by on-chip oscillator operation at f(Xin) operation (added in rev.2.00) f(Xin)=8 MHz (high-speed mode),Vcc= 1.8V to 5.5V, Ta = 25°C, output transistor is in cut-off state, A/D converter not operating) 200 Icc Increment by OCO Operation [uA] 180 160 140 120 100 80 60 40 20 0 1.5 2 2.5 3 3.5 4 4.5 5 5.5 Power Source Voltage Vcc [V] Note:The increment changes since the on-chip oscillator frequency changes depending on the ambient temperature and VCC. Fig. 56. Icc increment by on-chio oscillator operation at f(Xin) operation REJ99B1154-0200 ©2007. Renesas Technology Corp., All rights reserved. November 2007 Page 26 of 26 To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry. Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and “Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. “Standard”: 8. 9. 10. 11. 12. Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. “High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support. “Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries. (Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.