MAP, MAL, and MAV Series ¾ Industry Standard Package ¾ Wide Frequency Range ¾ RoHS Compliant Available ¾ Less than 1 pSec Jitter ELECTRICAL SPECIFICATION: LVDS LVPECL PECL 12.500MHz to 800.000MHZ (See Part Number Guide for Options) (See Part Number Guide for Options) -55°C to +125°C ±5 ppm / yr max 1.43V typ Vdd – 1.620 VDC max Vdd – 1.620 VDC max 1.10V typ Vdd- 1.025 vdc min Vdd- 1.025 vdc min 50 mA max 50 mA max N/A 60 mA max 60 mA max N/A N/A N/A 140 mA max (See Part Number Guide for Options) 2nSec max 50 Ohms into Vdd-2.00 VDC 10mSec max Less than 1 pSec Vih = 70% of Vdd min to Enable Output Vil = 30% max or grounded to Disable Output (High Impedance) Frequency Range Frequency Stability* Operating Temp.Range Storage Temp. Range Aging Logic “0” Logic “1” 2.5VDC ± 5% 3.3VDC ± 5% 5.0VDC ± 5% Symmetry (50% of waveform) Rise / Fall Time (20% to 80%) Load Start Time Phase Jitter (12kHz to 20MHz) Supply Voltage (Vdd) Supply Current Tri-State Operation * Inclusive of Temp., Load, Voltage and Aging MECHANICAL DIMENSIONS: A PACKAGE OPTION 5.08 [.200] MAX 20.70 [.815] MAX 15.24 [.600] 5.08 [.200] 2.54 [.100] 8 13.10 [.516] MAX 9 14 7.62 [.300] 1 7 .46 [.018] OPTIONAL PIN Black Dot to Denote Pin 1 DIMENSIONS IN BRACKETS ARE IN INCHES EXTERNAL BYPASS CAPACITOR IS RECOMMENDED PIN 1 NC, TRI-STATE OR COMPL. OUTPUT PIN 7 PIN 8 PIN 14 CASE GROUND OUTPUT SUPPLY VOLTAGE 5A PACKAGE OPTION TRI-STATE PIN 1 CASE GROUND PIN 7 OUTPUT PIN 8 PIN 9 COMPL. OUTPUT PIN 14 SUPPLY VOLTAGE PART NUMBERING GUIDE: FREQUENCY M Output Package Options A = 14DIP/4 5A = 14DIP/5 (Pin 9) P = PECL L = LVPECL V = LVDS Supply Voltage 2 = +2.5 VDC 3 = +3.3 VDC 5 = +5.0 VDC Frequency Stability 020 = ±20 ppm 025 = ±25 ppm 050 = ±50 ppm 100 = ±100 ppm Pin 1 Connection Blank = No connection C = Compl. Output H = Tri-state* Operating Temperature Blank = 0°C to +70°C 48 = -40°C to +85°C Symmetry Blank = 40%/60% A = 45%/55% Please Consult with MMD Sales Deparment for any other Parameters or Options * Pin 1 Connection must be Tri-state when using Pin 9 option. MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Specifications subject to change without notice Revision MAP060607H Value Added Options Blank = No Added Options G = Gull-Wing CLXXX = Cuts Lends XXX = Lead Lenght