MAPD-010201-8022CG E-Series Surface Mount Power Divider 1-2200 MHz Rev. V1 Features · · · · Schematic 2 Way 50Ohm Surface Mount 0 Degree Broad Band performance Description MAPD-010201-8022CG is a RoHS compliant 2 Way 0° Power Divider in a low cost, surface mount package. Component Dimensions Product Image Pin Configuration Pin No. Function 1 Input 2 Not Used (GND) 3 Output Port1 4 Output Port2 5 Not Used (GND) 6 Ground ∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPD-010201-8022CG E-Series Surface Mount Power Divider 1-2200 MHz Rev. V1 Electrical Specifications: TA = 25°C, Z 0 = 50Ω Ω Parameter Frequency (MHz) Units Min Typ Max Insertion Loss (Above 3dB) 1 - 2200 dB — 0.6 1.2 Isolation 1 - 800 800 - 1000 1000 -1800 1800 -2200 dB dB dB dB — 13.5 15 17 12 15 17 18 13 17 19 — Amplitude Balance 1 - 800 800 - 1000 1000 -1800 1800 -2200 dB dB dB dB — — — — 0.2 0.5 0.7 1.2 0.5 0.7 1.2 1.5 Phase Balance 1 - 2200 deg — 1 3 Input Return Loss 1 - 800 800 - 1000 1000 -1800 1800 -2000 dB dB dB dB 8 10 — 15 10 10.6 14 16 — — — — Output Return Loss 1 - 800 800 - 1000 1000 -1800 1800 -2000 dB dB dB dB 18 17 12 10 22 20 19 12 — — — — Absolute Maximum Ratings 1,2 Parameter Absolute Maximum RF Power 250 mW Internal Load Dissipation 50 mA Operating Temperature -40°C to +80°C Storage Temperature -55°C to +125°C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPD-010201-8022CG E-Series Surface Mount Power Divider 1-2200 MHz Rev. V1 Typical Performance Curves Insertion Loss Amplitude Unbalance 0 dB dB -0.5 -1 -1.5 -2 0 440 880 1320 1760 2.5 2 1.5 1 0.5 0 -0.5 0 2200 440 880 Phase Unbalance 2200 1320 1760 2200 1320 1760 2200 Input Return Loss 3 0 -5 1 dB Degree 1760 MHz MHz -1 -10 -15 -3 -20 0 440 880 1320 1760 2200 0 440 880 MHz MHz Output Return Loss Isolation 0 0 -5 -10 -15 -20 -25 -30 -5 dB dB 1320 -10 -15 -20 0 440 880 1320 MHz 1760 2200 0 440 880 MHz 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPD-010201-8022CG E-Series Surface Mount Power Divider 1-2200 MHz Rev. V1 Tape & Reel Information Item Dimension Ao 4.00mm +/-0.1mm Bo 4.00mm +/-0.1mm Ko 2.9mm +/-0.1mm W 12.00mm +/-0.3mm P1 8.00mm +/-0.1mm Ordering Information Part Number Package MAPD-010201-8022CG Tape and Reel (2000 piece Reel) 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.