MAXIM MAX3221EETE

MAX3221E/
LE
AVAILAB
MAX3223E/MAX3243E
±15kV ESD-Protected, 1µA, 3.0V to 5.5V, 250kbps,
RS-232 Transceivers with AutoShutdown
General Description
Next Generation Device Features
The MAX3221E/MAX3223E/MAX3243E are 3V-powered
EIA/TIA-232 and V.28/V.24 communications interfaces
with automatic shutdown/wakeup features, high datarate capabilities, and enhanced electrostatic discharge
(ESD) protection. All transmitter outputs and receiver
inputs are protected to ±15kV using IEC 1000-4-2 AirGap Discharge, to ±8kV using IEC 1000-4-2 Contact
Discharge, and to ±15kV using the Human Body Model.
The MAX3221E/MAX3223E/MAX3243E achieve a
1µA supply current with Maxim’s revolutionary
AutoShutdown™ feature. They save power without
changes to the existing BIOS or operating system by entering low-power shutdown mode when the RS-232 cable is
disconnected, or when the transmitters of the connected
peripherals are off.
o For Space-Constrained Applications:
MAX3228E/MAX3229E: ±15kV ESD-Protected, +2.5V
to +5.5V RS-232 Transceivers in UCSP™
MAX3222E/MAX3232E/MAX3237E/MAX3241E/
MAX3246E: ±15kV ESD-Protected Down to 10nA,
+3.0V to +5.5V, Up to 1Mbps, True RS-232
Transceivers (MAX3246E Available in a UCSP
Package)
The transceivers have a proprietary low-dropout transmitter output stage, delivering true RS-232 performance
from a +3.0V to +5.5V supply with a dual charge pump.
The charge pump requires only four small 0.1µF capacitors for operation from a +3.3V supply. Each device is
guaranteed to run at data rates of 250kbps while maintaining RS-232 output levels.
The MAX3221E contains just one driver and one receiver,
making it the smallest single-supply RS-232 transceiver.
The MAX3223E has two drivers and two receivers. The
MAX3243E is a complete 3-driver/5-receiver serial port
ideal for notebook or subnotebook computers. It also
includes two noninverting receiver outputs that are always
active, allowing external devices to be monitored without
Functional
Diagrams
forward biasing the protection
diodes in circuitry
that may
be powered down.
The MAX3221E, MAX3223E, and MAX3243E are available in space-saving TQFN, SSOP, and TSSOP packages.
Applications
Notebook, Subnotebook, and Palmtop Computers
Cellular Phones
Battery-Powered Equipment
Handheld Equipment
Peripherals
Printers
o For Data Cable Applications:
MAX3380E/MAX3381E: +2.35V to +5.5V, 1µA,
2Tx/2Rx RS-232 Transceivers with ±15kV ESDProtected I/O and Logic Pins
Ordering Information
PART
PIN-PACKAGE
MAX3221ECTE+
0°C to +70°C
16 TQFN-EP*
MAX3221ECUE+
0°C to +70°C
16 TSSOP
MAX3221ECAE+
0°C to +70°C
16 SSOP
MAX3221EEAE+
-40°C to +85°C
16 SSOP
MAX3221EETE+
-40°C to +85°C
16 TQFN-EP*
MAX3221EEUE+
-40°C to +85°C
MAX3223ECPP+
0°C to +70°C
20 PDIP
MAX3223ECAP+
0°C to +70°C
20 SSOP
MAX3223ECUP+
0°C to +70°C
20 TSSOP
MAX3223ECTP+
0°C to +70°C
MAX3223EEPP+
-40°C to +85°C
20 PDIP
MAX3223EEAP+
-40°C to +85°C
20 SSOP
MAX3223EEUP+
-40°C to +85°C
20 TSSOP
MAX3223EETP+
-40°C to +85°C
20 TQFN-EP*
16 TSSOP
20 TQFN-EP*
MAX3223EEUP/V+
-40°C to +85°C
20 TSSOP
*Exposed pad.
+Denotes a lead(Pb)-free/RoHS-compliant package.
/V denotes an automotive qualified part.
Ordering Information continued at end of data sheet.
Selector Guide
PART
MAX3221E
Pin Configurations appear at end of data sheet.
TEMP RANGE
NO. OF
DRIVERS/
RECEIVERS
VCC
RANGE
(V)
AutoShutdown
1/1
+3.0 to +5.5
Typical
Operating
Circuits
appear
at
end
of
data
sheet.
Pin Configurations appear at end of data sheet.
MAX3243E
3/5
+3.0 to +5.5
Functional Diagrams continued at end of data sheet.
AutoShutdown and UCSP are trademarks of Maxim Integrated Products, Inc.
UCSP is a trademark of Maxim Integrated Products, Inc.
†Covered by U.S. Patent numbers 4,636,930; 4,679,134; 4,777,577; 4,797,899; 4,809,152; 4,897,774; 4,999,761; 5,649,210; and other patents pending.
MAX3223E
2/2
+3.0 to +5.5
For pricing, delivery, and ordering information, please contact Maxim Direct
at 1-888-629-4642, or visit Maxim’s website at www.maximintegrated.com.
19-1283; Rev 7; 8/11
MAX3221E/MAX3223E/MAX3243E
±15kV ESD-Protected, 1µA, 3.0V to 5.5V, 250kbps,
RS-232 Transceivers with AutoShutdown
ABSOLUTE MAXIMUM RATINGS
VCC to GND ..............................................................-0.3V to +6V
V+ to GND (Note 1) ..................................................-0.3V to +7V
V- to GND (Note 1) ...................................................+0.3V to -7V
V+ + |V-| (Note 1) .................................................................+13V
Input Voltages
T_IN, EN, FORCEON, FORCEOFF to GND ............-0.3V to +6V
R_IN to GND ......................................................................±25V
Output Voltages
T_OUT to GND................................................................±13.2V
R_OUT, R2OUTB, INVALID to GND .........-0.3V to (VCC + 0.3V)
Short-Circuit Duration
T_OUT to GND .........................................................Continuous
Continuous Power Dissipation (TA = +70°C)
16-Pin SSOP (derate 7.14mW/°C above +70°C) ...........571mW
16-Pin TSSOP (derate 9.4mW/°C above +70°C) ........754.7mW
16-Pin TQFN (derate 20.8mW/°C above +70°C) ......1666.7mW
20-Pin Plastic DIP (derate 11.11mW/°C above +70°C)....889mW
20-Pin SSOP (derate 8.00mW/°C above +70°C) ...........640mW
20-Pin TSSOP (derate 10.9mW/°C above +70°C) .........879mW
20-Pin TQFN (derate 21.3mW/°C above +70°C) ......1702.1mW
28-Pin SSOP (derate 9.52mW/°C above +70°C)............762mW
28-Pin TSSOP (derate 12.8mW/°C above +70°C) .......1026mW
32-Pin TQFN (derate 37mW/°C above +70°C) ............2963mW
Operating Temperature Ranges
MAX32_ _EC_ _ ....................................................0°C to +70°C
MAX32_ _EE_ _..................................................-40°C to +85°C
Storage Temperature Range .............................-65°C to +160°C
Lead Temperature (soldering, 10s) .................................+300°C
Soldering Temperature (reflow) .......................................+260°C
Note 1: V+ and V- can have maximum magnitudes of 7V, but their absolute difference cannot exceed 13V.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VCC = +3.0V to +5.5V, C1–C4 = 0.1µF (Note 2), TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
DC CHARACTERISTICS (VCC = 3.3V or 5.0V, TA = +25°C)
Supply Current, AutoShutdown
FORCEON = GND,
FORCEOFF = VCC, all R_IN open
1.0
10
µA
Supply Current, Shutdown
FORCEOFF = GND, all R_IN = GND
1.0
10
µA
Supply Current,
AutoShutdown Disabled
FORCEON = FORCEOFF = VCC,
no load
0.3
1
mA
0.8
V
LOGIC INPUTS
Input Logic Threshold Low
T_IN, EN, FORCEON, FORCEOFF
Input Logic Threshold High
T_IN, EN, FORCEON,
FORCEOFF
VCC = 3.3V
2.0
VCC = 5.0V
2.4
Transmitter Input Hysteresis
V
0.5
V
T_IN, EN, FORCEON, FORCEOFF
±0.01
±1
µA
Output Leakage Current
R_OUT receivers disabled
±0.05
±10
µA
Output Voltage Low
IOUT = 1.6mA
0.4
V
Output Voltage High
IOUT = -1.0mA
Input Leakage Current
RECEIVER OUTPUTS
VCC - 0.6
VCC - 0.1
V
AutoShutdown (FORCEON = GND, FORCEOFF = VCC)
2
Receiver Input Threshold to
INVALID Output High
Figure 5a
Receiver Input Threshold to
INVALID Output Low
Figure 5a
INVALID Output Voltage Low
IOUT = 1.6mA
INVALID Output Voltage High
IOUT = -1.0mA
Positive threshold
Negative threshold
2.7
-2.7
-0.3
VCC - 0.6
V
0.3
V
0.4
V
V
Maxim Integrated
MAX3221E/MAX3223E/MAX3243E
±15kV ESD-Protected, 1µA, 3.0V to 5.5V, 250kbps,
RS-232 Transceivers with AutoShutdown
ELECTRICAL CHARACTERISTICS (continued)
(VCC = +3.0V to +5.5V, C1–C4 = 0.1µF (Note 2), TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
Receiver Positive or Negative
Threshold to INVALID High
tINVH
VCC = 5V, Figure 5b
1
µs
Receiver Positive or Negative
Threshold to INVALID Low
tINVL
VCC = 5V, Figure 5b
30
µs
Receiver or Transmitter Edge to
Transmitters Enabled
tWU
VCC = 5V, Figure 5b
100
µs
RECEIVER
INPUTS
Input Voltage
Range
-25
Input Voltage Range
-25
Input Threshold Low
TA = +25°C
Input Threshold High
TA = +25°C
VCC = 3.3V
0.6
1.2
VCC = 5.0V
0.8
1.5
25
V
25
V
V
VCC = 3.3V
1.5
2.4
VCC = 5.0V
1.8
2.4
Input Hysteresis
0.5
Input Resistance
3
5
V
V
7
kΩ
TRANSMITTER OUTPUTS
Output Voltage Swing
All transmitter outputs loaded with
3kΩ to ground
±5
±5.4
Output Resistance
VCC = V+ = V- = 0, TOUT = ±2V
300
10M
Output Short-Circuit Current
Output Leakage Current
VOUT = ±12V, VCC = 0 or 3V to
5.5V, transmitters disabled
V
Ω
±60
mA
±25
µA
MOUSE DRIVEABILITY (MAX3243E)
Transmitter Output Voltage
T1IN = T2IN = GND, T3IN = VCC,
T3OUT loaded with 3kΩ to GND,
T1OUT and T2OUT loaded with
2.5mA each
±5.0
V
ESD PROTECTION
R_IN, T_OUT
Maxim Integrated
IEC 1000-4-2 Air-Gap Discharge
±15
IEC 1000-4-2 Contact Discharge
±8
Human Body Model
±15
kV
kV
3
MAX3221E/MAX3223E/MAX3243E
±15kV ESD-Protected, 1µA, 3.0V to 5.5V, 250kbps,
RS-232 Transceivers with AutoShutdown
TIMING CHARACTERISTICS—MAX3221E/MAX3223E/MAX3243E
(VCC = +3.0V to +5.5V, C1–C4 = 0.1µF (Note 2), TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.)
PARAMETER
SYMBOL
Maximum Data Rate
tPHL
Receiver Propagation Delay
CONDITIONS
MIN
RL = 3kΩ, CL = 1000pF,
one transmitter switching
250
TYP
UNITS
kbps
0.15
CL = 150pF
tPLH
MAX
µs
0.15
Receiver Output Enable Time
Normal operation
200
ns
Receiver Output Disable Time
Normal operation
200
ns
(Note 3)
100
ns
50
ns
Transmitter Skew
⏐ tPHL - tPLH ⏐
Receiver Skew
⏐ tPHL - tPLH ⏐
VCC = 3.3V,
RL = 3kΩ to 7kΩ,
TA = +25°C,
measured from +3V
to -3V or
-3V to +3V, one
transmitter switching
Transition-Region Slew Rate
CL = 150pF to
1000pF
6
30
V/µs
Note 2: C1–C4 = 0.1µF, tested at 3.3V ±10%. C1 = 0.047µF, C2–C4 = 0.33µF, tested at 5.0V ±10%.
Note 3: Transmitter skew is measured at the transmitter zero cross points.
Typical Operating Characteristics
(VCC = +3.3V, 250kbps data rate, 0.1µF capacitors, all transmitters loaded with 3kΩ and CL, TA = +25°C, unless otherwise noted.)
VOUT+
14
SLEW RATE (V/µs)
12
T1 TRANSMITTING AT 250kbps
T2 (MAX3223E) TRANSMITTING AT 15.6kbps
-SLEW
10
+SLEW
8
6
4
-4
-5
-6
VOUT-
2
FOR DATA RATES UP TO 250kbps
0
0
1000
2000
3000
4000
LOAD CAPACITANCE (pF)
4
16
MAX3221-TOC2
6
5
4
3
2
1
0
-1
-2
-3
MAX3221E/MAX3223E
SLEW RATE vs. LOAD CAPACITANCE
MAX3221E-01
TRANSMITTER OUTPUT VOLTAGE (V)
MAX3221E/MAX3223E
TRANSMITTER OUTPUT VOLTAGE
vs. LOAD CAPACITANCE
5000
0
1000
2000
3000
4000
5000
LOAD CAPACITANCE (pF)
Maxim Integrated
MAX3221E/MAX3223E/MAX3243E
±15kV ESD-Protected, 1µA, 3.0V to 5.5V, 250kbps,
RS-232 Transceivers with AutoShutdown
Typical Operating Characteristics (continued)
(VCC = +3.3V, 250kbps data rate, 0.1µF capacitors, all transmitters loaded with 3kΩ and CL, TA = +25°C, unless otherwise noted.)
MAX3221E/MAX3223E
OPERATING SUPPLY CURRENT
vs. LOAD CAPACITANCE
250kbps
35
30
120kbps
25
20
20kbps
15
10
T1 TRANSMITTING AT 250kbps
T2 (MAX3223E) TRANSMITTING AT 15.6kbps
5
0
-1
-2
-3
-4
VOUT-
-6
0
1000
2000
3000
4000
5000
0
1000
2000
3000
4000
LOAD CAPACITANCE (pF)
LOAD CAPACITANCE (pF)
MAX3243E
SLEW RATE vs. LOAD CAPACITANCE
MAX3243E
OPERATING SUPPLY CURRENT
vs. LOAD CAPACITANCE
50
SUPPLY CURRENT (mA)
12
10
8
6
4
250kbps
40
120kbps
30
20kbps
20
10
2
0
5000
60
MAX3243E-05
14
SLEW RATE (V/µs)
1 TRANSMITTER AT 250kbps
2 TRANSMITTERS AT 15.6kbps
2
1
-5
0
T1 TRANSMITTING AT 250kbps
T2 (MAX3223E) TRANSMITTING AT 15.6kbps
0
0
1000
2000
3000
4000
LOAD CAPACITANCE (pF)
Maxim Integrated
VOUT+
4
3
MAX3243E-06
SUPPLY CURRENT (mA)
40
6
5
TRANSMITTER OUTPUT VOLTAGE (V)
MAX3224E-03
45
MAX3224E-04
MAX3243E
TRANSMITTER OUTPUT VOLTAGE
vs. LOAD CAPACITANCE
5000
0
1000
2000
3000
4000
5000
LOAD CAPACITANCE (pF)
5
MAX3221E/MAX3223E/MAX3243E
±15kV ESD-Protected, 1µA, 3.0V to 5.5V, 250kbps,
RS-232 Transceivers with AutoShutdown
Pin Description
PIN
MAX3221E
6
MAX3223E
MAX3243E
SO/
SSOP/
TSSOP
TQFNEP
NAME
FUNCTION
TQFNEP
SSOP/
TSSOP
TQFNEP
DIP/
SSOP/
TSSOP
14
1
19
1
—
22
EN
16
2
1
2
28
28
C1+
15
3
20
3
27
27
V+
+5.5V generated by the charge pump
1
4
2
4
24
23
C1-
Negative terminal of the voltage doubler Charge-Pump
Capacitor
Receiver Enable Control. Drive low for normal
operation. Drive high to force the receiver outputs
(R_OUT) into a high-impedance state.
Positive terminal of the voltage doubler Charge-Pump
Capacitor
2
5
3
5
1
29
C2+
Positive terminal of inverting Charge-Pump Capacitor
3
6
4
6
2
30
C2-
Negative terminal of inverting Charge-Pump Capacitor
4
7
5
7
3
31
V-
5
8
7, 14
9, 16
4-8
1-5
R_IN
6
9
8, 13
10, 15
15-19
13, 14,
15, 17,
18
R_OUT
TTL/CMOS Receiver Outputs
7
10
9
11
21
—
INVALID
Output of the Valid Signal Detector. INVALID is enabled
high if a valid RS-232 level is present on any receiver
input.
8
11
10, 11
12, 13
12, 13,
14
10, 11,
12
T_IN
9
12
12
14
23
—
FORCEON
10
13
6, 15
8, 17
9, 10,
11
6, 7, 8
T_OUT
—
—
—
—
20
19
R2OUTB
11
14
16
18
25
24
GND
Ground
12
15
17
19
26
26
VCC
+3.0V to +5.5V Supply Voltage
13
16
18
20
22
—
FORCEOF
F
—
—
—
—
—
21
SHDN
-5.5V generated by the charge pump
RS-232 Receiver Inputs
TTL/CMOS Transmitter Inputs
Drive high to override automatic circuitry keeping
transmitters and charge pump on (FORCEOFF must be
high) (Table 1).
RS-232 Transmitter Outputs
TTL/CMOS Noninverting Complementary Receiver
Output. Always active.
Force-Off Input, active low. Drive low to shut down
transmitters, receivers (MAX3243E, except R2OUTB),
and on-board charge pump. This overrides all
automatic circuitry and FORCEON (Table 1).
Shutdown Control, Active Low
Maxim Integrated
MAX3221E/MAX3223E/MAX3243E
±15kV ESD-Protected, 1µA, 3.0V to 5.5V, 250kbps,
RS-232 Transceivers with AutoShutdown
Pin Description (continued)
PIN
MAX3221E
MAX3223E
MAX3243E
FUNCTION
TQFNEP
SSOP/
TSSOP
TQFNEP
DIP/
SSOP/
TSSOP
SO/
SSOP/
TSSOP
TQFNEP
NAME
—
—
—
—
—
19, 20
R_OUTB
—
—
—
—
—
9, 16,
25, 32
N.C.
—
—
—
—
—
—
EP
Noninverting Complementary Receiver Outputs.
Always active.
No Connection. Not internally connected.
Exposed Paddle (TQFN package only). Solder the exposed
paddle to the ground plane or leave unconnected.
_______________Detailed Description
Dual Charge-Pump Voltage Converter
The MAX3221E/MAX3223E/MAX3243E’s internal power
supply consists of a regulated dual charge pump that
provides output voltages of +5.5V (doubling charge
pump) and -5.5V (inverting charge pump), over the
+3.0V to +5.5V VCC range. The charge pumps operate
in discontinuous mode: if the output voltages are less
than 5.5V, the charge pumps are enabled; if the output
voltages exceed 5.5V, the charge pumps are disabled.
Each charge pump requires a flying capacitor (C1, C2)
and a reservoir capacitor (C3, C4) to generate the V+
and V- supplies.
POWERMANAGEMENT
UNIT OR
KEYBOARD
CONTROLLER
FORCEOFF
FORCEON
INVALID
MAX3243E
RS-232 Transmitters
The transmitters are inverting level translators that convert CMOS-logic levels to 5.0V EIA/TIA-232 levels. They
guarantee a 250kbps data rate with worst-case loads
of 3kΩ in parallel with 1000pF, providing compatibility
with PC-to-PC communication software such as
LapLink™. Transmitters can be paralleled to drive multiple receivers. The MAX3243E has been specifically
designed to drive serial mice. Figure 1 shows a complete system connection. When FORCEOFF is driven to
ground, or the AutoShutdown circuitry senses invalid
voltage levels on all receiver inputs, the transmitters are
disabled and the outputs are forced into a high-impedance state. When powered off or shut down, the output
can be driven up to ±12V. The transmitter inputs do not
have pull-up resistors.
CPU
I/O
CHIP
WITH
UART
RS-232
Figure 1. Interface Under Control of PMU
LapLink is a trademark of Traveling Software.
Maxim Integrated
7
MAX3221E/MAX3223E/MAX3243E
±15kV ESD-Protected, 1µA, 3.0V to 5.5V, 250kbps,
RS-232 Transceivers with AutoShutdown
RS-232 Receivers
VCC
The MAX3221E/MAX3223E/MAX3243E’s receivers convert RS-232 signals to CMOS-logic output levels. All
receivers have inverting three-state outputs and can be
active or inactive. In shutdown (FORCEOFF = low) or in
AutoShutdown, the MAX3221E/MAX3223E’s receivers
are active (Table 1). Drive EN high to place the receiver(s) in a high-impedance state. The MAX3243E’s
receivers are high-impedance when the part is in shutdown (FORCEOFF = low).
PROTECTION
DIODE
5kΩ
UART
Tx
GND
a)
SHDN = GND
OLDER RS-232: POWERED-DOWN UART DRAWS CURRENT FROM ACTIVE
RECEIVER OUTPUT IN SHUTDOWN.
VCC
TO
LOGIC
µP TRANSITION
DETECTOR
AutoShutdown
The MAX3221E/MAX3223E/MAX3243E achieve a 1µA
supply current with Maxim’s new AutoShutdown feature, which operates when FORCEON is low and
FORCEOFF is high. When these devices sense no valid
signal levels on all receiver inputs for 30µs, the onboard charge pump and drivers are shut off, reducing
supply current to 1µA. This occurs if the RS-232 cable
is disconnected or the connected peripheral transmitters are turned off. The device turns on again when a
valid level is applied to any RS-232 receiver input. As a
result, the system saves power without changes to the
existing BIOS or operating system.
Table 2 and Figure 3c summarize the MAX3221E/
MAX3223E/MAX3243E operating modes. FORCEON
and FORCEOFF override AutoShutdown. When neither
control is asserted, the IC selects between these states
automatically, based on receiver input levels. Figures
3a, 3b, and 5a depict valid and invalid RS-232 receiver
levels. Figure 5 shows the input levels and timing diagram for AutoShutdown operation.
I
Rx
The MAX3243E features an extra, always-active complementary output (R2OUTB). R2OUTB monitors
receiver activity while the other receivers are highimpedance. This allows Ring Indicator to be monitored
without forward biasing other devices connected to the
receiver outputs. This is ideal for systems where VCC
drops to 0 in shutdown to accommodate peripherals
such as UARTs (Figure 2).
The MAX3221E/MAX3223E/MAX3243E feature an
INVALID output that is enabled low when no valid RS-232
signal levels have been detected on all receiver inputs.
INVALID is functional in any mode (Figures 3 and 5).
PREVIOUS
RS-232
VCC
I
PROTECTION
DIODE
MAX3243E
R2OUTB
VCC
Rx
THREE-STATED
UART
5kΩ
Tx
GND
b)
R2IN
R2OUT
T1IN
T1OUT
FORCEOFF = GND
NEW MAX3243E: IN SHUTDOWN, R2OUTB IS USED TO MONITOR EXTERNAL
DEVICES AND R2OUT IS THREE STATED, ELIMINATING A CURRENT PATH
THROUGH THE UART'S PROTECTION DIODE.
Figure 2. The MAX3243E detects RS-232 activity when the
UART and interface are shut down.
8
Maxim Integrated
MAX3221E/MAX3223E/MAX3243E
±15kV ESD-Protected, 1µA, 3.0V to 5.5V, 250kbps,
RS-232 Transceivers with AutoShutdown
Table 1. Output Control Truth Table
FORCEON
FORCEOFF
EN
(MAX3221E/
MAX3223E)
VALID
RECEIVER
LEVEL
T_OUT
R_OUT
(MAX3221E/
MAX3223E)
R_OUT
(MAX3243E)
R2OUTB
(MAX3243E)
Shutdown
(Forced Off)
X
0
0
X
High-Z
Active
High-Z
Active
X
0
1
X
High-Z
High-Z
High-Z
Active
Normal Operation
(Forced On)
1
1
0
X
Active
Active
Active
Active
1
1
1
X
Active
High-Z
Active
Active
Normal Operation
(AutoShutdown)
0
1
0
Yes
Active
Active
Active
Active
0
1
1
Yes
Active
High-Z
Active
Active
Shutdown
(AutoShutdown)
0
1
0
No
High-Z
Active
Active
Active
0
1
1
No
High-Z
High-Z
Active
Active
OPERATION
STATUS
X = Don’t Care
+2.7V
+0.3V
R_IN
-0.3V
30µs
COUNTER
R
TO MAX32_ _E
POWER SUPPLY
AND TRANSMITTERS
INVALID
* TRANSMITTERS ARE DISABLED, REDUCING SUPPLY CURRENT TO 1µA IF
ALL RECEIVER INPUTS ARE BETWEEN +0.3V AND -0.3V FOR AT LEAST 30µs.
Figure 3a. MAX32_ _E Entering 1µA Supply Mode via
AutoShutdown
A mouse or other system with AutoShutdown may need
time to wake up. Figure 4 shows a circuit that forces
the transmitters on for 100ms, allowing enough time for
the other system to realize that the MAX3221E/
MAX3223E/ MAX3243E are awake. If the other system
transmits valid RS-232 signals within that time, the RS232 ports on both systems remain enabled.
When shut down, the device’s charge pumps are off,
V+ is pulled to VCC, V- is pulled to ground, and the
transmitter outputs are high impedance. The time
required to exit shutdown is typically 100µs (Figure 5b).
Software-Controlled Shutdown
If direct software control is desired, INVALID can be
used to indicate DTR or Ring Indicator signal. Connect
FORCEOFF and FORCEON together to disable AutoShutdown so the line acts like a SHDN input.
Maxim Integrated
R_IN
-2.7V
30µs
COUNTER
R
TO MAX32_ _E
POWER SUPPLY
INVALID
*TRANSMITTERS ARE ENABLED IF:
ANY RECEIVER INPUT IS GREATER THAN +2.7V OR LESS THAN -2.7V.
ANY RECEIVER INPUT HAS BEEN BETWEEN +0.3V AND -0.3V FOR LESS THAN 30µs.
Figure 3b. MAX32_ _E with Transmitters Enabled Using
AutoShutdown
±15kV ESD Protection
As with all Maxim devices, ESD-protection structures are
incorporated on all pins to protect against electrostatic
discharges encountered during handling and assembly.
The driver outputs and receiver inputs of the
MAX3221E/MAX3223E/MAX3243E have extra protection
against static electricity. Maxim’s engineers have developed state-of-the-art structures to protect these pins
against ESD of ±15kV without damage. The ESD structures withstand high ESD in all states: normal operation,
shutdown, and powered down. After an ESD event,
Maxim’s E versions keep working without latchup,
whereas competing RS-232 products can latch and
must be powered down to remove latchup. See Table 4.
9
MAX3221E/MAX3223E/MAX3243E
±15kV ESD-Protected, 1µA, 3.0V to 5.5V, 250kbps,
RS-232 Transceivers with AutoShutdown
FORCEOFF
POWER DOWN
FORCEON
INVALID
Table 2. INVALID Truth Table
RS-232 SIGNAL PRESENT
AT ANY RECEIVER INPUT
INVALID OUTPUT
Yes
High
No
Low
INVALID IS AN INTERNALLY GENERATED SIGNAL
THAT IS USED BY THE AUTOSHUTDOWN LOGIC
AND APPEARS AS AN OUTPUT OF THE DEVICE.
POWER DOWN IS ONLY AN INTERNAL SIGNAL.
IT CONTROLS THE OPERATIONAL STATUS OF
THE TRANSMITTERS AND THE POWER SUPPLIES.
Figure 3c. MAX32_ _E AutoShutdown Logic
TRANSMITTERS ENABLED, INVALID HIGH
MASTER SHDN LINE
0.1µF
1MΩ
FORCEOFF FORCEON
MAX3221E
MAX3223E
MAX3243E
RECEIVER INPUT LEVELS
POWERMANAGEMENT
UNIT
+2.7V
INDETERMINATE
+0.3V
0
AUTOSHUTDOWN, TRANSMITTERS DISABLED,
1µA SUPPLY CURRENT, INVALID LOW
-0.3V
INDETERMINATE
-2.7V
TRANSMITTERS ENABLED, INVALID HIGH
Figure 4. AutoShutdown with Initial Turn-On to Wake Up a
Mouse or Another System
ESD protection can be tested in various ways; the transmitter outputs and receiver inputs of this product family
are characterized for protection to the following limits:
a)
1) ±15kV using the Human Body Model
2) ±8kV using the Contact Discharge Method specified
in IEC1000-4-2
3) ±15kV using IEC1000-4-2’s Air-Gap Method
RECEIVER
INPUT
VOLTAGE
(V)
INVALID
REGION
ESD Test Conditions
ESD performance depends on a variety of conditions.
Contact Maxim for a reliability report that documents
test setup, test methodology, and test results.
Human Body Model
Figure 6a shows the Human Body Model, and Figure
6b shows the current waveform it generates when discharged into a low impedance. This model consists of a
100pF capacitor charged to the ESD voltage of interest,
which is then discharged into the test device through a
1.5kΩ resistor.
IEC1000-4-2
The IEC1000-4-2 standard covers ESD testing and performance of finished equipment; it does not specifically
refer to integrated circuits. The MAX3221E/ MAX3223E/
MAX3243E help you design equipment that meets
10
VCC
INVALID
OUTPUT
(V)
0
tINVL
tINVH
tWU
V+
VCC
0
V-
b)
Figure 5. AutoShutdown Trip Levels
Maxim Integrated
MAX3221E/MAX3223E/MAX3243E
±15kV ESD-Protected, 1µA, 3.0V to 5.5V, 250kbps,
RS-232 Transceivers with AutoShutdown
RC 1MΩ
CHARGE-CURRENT
LIMIT RESISTOR
HIGHVOLTAGE
DC
SOURCE
Cs
100pF
RD 1500Ω
RC 50MΩ to 100MΩ
DISCHARGE
RESISTANCE
DISCHARGE
RESISTANCE
CHARGE CURRENT
LIMIT RESISTOR
DEVICE
UNDER
TEST
STORAGE
CAPACITOR
Figure 6a. Human Body ESD Test Models
HIGHVOLTAGE
DC
SOURCE
RD 330Ω
Cs
150pF
STORAGE
CAPACITOR
DEVICE
UNDER
TEST
Figure 7a. IEC1000-4-2 ESD Test Model
I
IP 100%
90%
Ir
100%
PEAK-TO-PEAK RINGING
(NOT DRAWN TO SCALE)
90%
I PEAK
AMPERES
36.8%
10%
0
0
tRL
TIME
tDL
CURRENT WAVEFORM
Figure 6b. Human Body Model Current Waveform
Level 4 (the highest level) of IEC1000-4-2, without the
need for additional ESD-protection components.
The major difference between tests done using the
Human Body Model and IEC1000-4-2 is higher peak
current in IEC1000-4-2, because series resistance is
lower in the IEC1000-4-2 model. Hence, the ESD withstand voltage measured to IEC1000-4-2 is generally
lower than that measured using the Human Body
Model. Figure 7a shows the IEEE1000-4-2 model and
Figure 7b shows the current waveform for the ±8kV
IEC1000-4-2 Level 4 ESD contact-discharge test.
The air-gap test involves approaching the device with a
charged probe. The contact-discharge method connects
the probe to the device before the probe is energized.
Machine Model
The Machine Model for ESD tests all pins using a 200pF
storage capacitor and zero discharge resistance. Its
objective is to emulate the stress caused by contact that
occurs with handling and assembly during manufacturing. Of course, all pins require this protection during
manufacturing, not just RS-232 inputs and outputs.
Maxim Integrated
10%
t r = 0.7ns to 1ns
t
30ns
60ns
Figure 7b. IEC1000-4-2 ESD Generator Current Waveform
Therefore, after PC board assembly, the Machine Model
is less relevant to I/O ports.
___________Applications Information
Capacitor Selection
The capacitor type used for C1–C4 is not critical for
proper operation; either polarized or nonpolarized
capacitors may be used. The charge pump requires
0.1µF capacitors for 3.3V operation. For other supply
voltages, refer to Table 3 for required capacitor values.
Do not use values smaller than those listed in Table 3.
Increasing the capacitor values (e.g., by a factor of 2)
reduces ripple on the transmitter outputs and slightly
reduces power consumption. C2, C3, and C4 can be
increased without changing C1’s value. However, do
not increase C1 without also increasing the values of
C2, C3, and C4 to maintain the proper ratios (C1 to
the other capacitors).
11
MAX3221E/MAX3223E/MAX3243E
±15kV ESD-Protected, 1µA, 3.0V to 5.5V, 250kbps,
RS-232 Transceivers with AutoShutdown
When using the minimum required capacitor values,
make sure the capacitor value does not degrade excessively with temperature. If in doubt, use capacitors with a
larger nominal value. The capacitor’s equivalent series
resistance (ESR) usually rises at low temperatures and
influences the amount of ripple on V+ and V-.
Table 3. Required Capacitor Values
VCC
(V)
C1, CBYPASS
(µF)
C2, C3, C4
(µF)
3.0 to 3.6
0.22
0.22
3.15 to 3.6
0.1
0.1
Power-Supply Decoupling
4.5 to 5.5
0.047
0.33
In most circumstances, a 0.1µF VCC bypass capacitor is
adequate. In applications that are sensitive to powersupply noise, use a capacitor of the same value as the
charge-pump capacitor C1. Connect bypass capacitors
as close to the IC as possible.
3.0 to 5.5
0.22
1
FORCEON =
FORCEOFF
T2OUT
5V/div
Transmitter Outputs
when Exiting Shutdown
Figure 8 shows two transmitter outputs when exiting
shut down mode. As they become active, the two transmitter outputs are shown going to opposite RS-232 levels (one transmitter output is high, the other is low).
Each transmitter is loaded with 3kΩ in parallel with
1000pF. The transmitter outputs display no ringing or
undesirable transients as they come out of shutdown,
and are enabled only when the magnitude of Vexceeds approximately -3V.
High Data Rates
The MAX3221E/MAX3223E/MAX3243E maintain the RS232 ±5.0V minimum transmitter output voltage even at
high data rates. Figure 9 shows a transmitter loopback
test circuit. Figure 10 shows a loopback test result at
120kbps, and Figure 11 shows the same test at 250kbps.
For Figure 10, all three transmitters were driven simultaneously at 120kbps into RS-232 loads in parallel with
1000pF. For Figure 11, a single transmitter was driven at
250kbps, and all three transmitters were loaded with an
RS-232 receiver in parallel with 1000pF.
Mouse Driveability (MAX3243E)
The MAX3243E has been specifically designed to power
serial mice while operating from low-voltage power supplies. It has been tested with leading mouse brands such
2V/div
T1OUT
VCC = 3.3V
C1–C4 = 0.1µF
40µs/div
Figure 8. Transmitter Outputs Exiting Shutdown or Powering Up
as Logitech and Microsoft. When tested, the MAX3243E
successfully drove all serial mice and met their respective
current and voltage requirements. The MAX3243E’s regulated dual charge pump ensures the transmitters will supply at least ±5V during worst-case conditions. Figure 12a
shows the transmitter outputs under increasing load current. The AutoShutdown feature does not work with a
mouse, so FORCEOFF and FORCEON should be connected to VCC. Figure 12b (on the following page) shows
a mouse driver test circuit. To achieve mouse driveability
with 1µA supply current when the port is inactive, use
parts with the AutoShutdown Plus™ feature (such as the
MAX3244E and MAX3245E).
AutoShutdown Plus is a trademark of Maxim Integrated Products, Inc.
12
Maxim Integrated
MAX3221E/MAX3223E/MAX3243E
±15kV ESD-Protected, 1µA, 3.0V to 5.5V, 250kbps,
RS-232 Transceivers with AutoShutdown
Table 4. ±15kV ESD-Protected, 3.0V to 5.5V Powered RS-232 Transceivers from Maxim
PART
SUPPLY
VOLTAGE
RANGE
(V)
NO. SUPPLY
AutoOF CURRENT Shutdown
Tx/Rx
(µA)
Plus
MAX3241E +3.0 to +5.5
3/5
300
MAX3243E +3.0 to +5.5
3/5
MAX3244E +3.0 to +5.5
3/5
MAX3245E +3.0 to +5.5
AutoShutdown
HUMAN
BODY
MODEL
(kV)
IEC 1000-4-2
CONTACT
DISCHARGE
(kV)
IEC 1000-4-2
AIR-GAP
DISCHARGE
(kV)
GUARANTEED
DATA RATE
(kbps)
—
—
±15
±8
±15
250
1
—
Yes
±15
±8
±15
250
1
Yes
—
±15
±8
±15
250
3/5
1
Yes
—
±15
±8
±15
1Mbps
MAX3232E +3.0 to +5.5
2/2
300
—
—
±15
±8
±15
250
MAX3222E +3.0 to +5.5
2/2
300
—
—
±15
±8
±15
250
MAX3223E +3.0 to +5.5
2/2
1
—
Yes
±15
±8
±15
250
MAX3224E +3.0 to +5.5
2/2
1
Yes
—
±15
±8
±15
250
MAX3225E +3.0 to +5.5
2/2
1
Yes
—
±15
±8
±15
1Mbps
MAX3221E +3.0 to +5.5
1/1
1
—
Yes
±15
±8
±15
250
MAX3226E +3.0 to +5.5
1/1
1
Yes
—
±15
±8
±15
250
MAX3227E +3.0 to +5.5
1/1
1
Yes
—
±15
±8
±15
1Mbps
VCC
0.1µF
5V/div
T1IN
C1+
VCC
V+
C3
C1
C1C2+
C2
C2-
5V/div
MAX3221E
MAX3223E
MAX3243E
T1OUT
VC4
5V/div
R1OUT
T_ OUT
T_ IN
2µs/div
R_ IN
R_ OUT
0
VCC = 3.3V
EN (MAX3221E/3E)
Figure 10. Loopback Test Result at 120kbps
5kΩ
1000pF
VCC
FORCEOFF
GND
Figure 9. Loopback Test Circuit
Maxim Integrated
13
5V/div
T1OUT
5V/div
R1OUT
VCC = 3.3V
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
VOUT+
VCC
VOUTVOUT-
0
2µs/div
VOUT+
VCC = 3.0V
MAX2343E-FIG15
5V/div
T1IN
TRANSMITTER OUTPUT VOLTAGE (V)
MAX3221E/MAX3223E/MAX3243E
±15kV ESD-Protected, 1µA, 3.0V to 5.5V, 250kbps,
RS-232 Transceivers with AutoShutdown
1
2
3
4
5
6
7
8
9
10
LOAD CURRENT PER TRANSMITTER (mA)
Figure 11. Loopback Test Result at 250kbps
Table 5. Logic Family Compatibility with
Various Supply Voltages
VCC SUPPLY
VOLTAGE
(V)
COMPATIBILITY
3.3
3.3
Compatible with all CMOS
families.
5
5
3.3
Compatible with all TTL and
CMOS-logic families.
Compatible with ACT and
HCT CMOS, and with TTL.
Incompatible with AC, HC,
or CD4000 CMOS.
Interconnection with 3V and 5V Logic
The MAX3221E/MAX3223E/MAX3243E can directly
interface with various 5V logic families, including ACT
and xHCT CMOS. See Table 5 for more information on
possible combinations of interconnections.
14
Ordering Information (continued)
PART
SYSTEM
POWERSUPPLY
VOLTAGE
(V)
5
Figure 12a. Transmitter Output Voltage vs. Load Current per
Transmitter
TEMP RANGE
PIN-PACKAGE
MAX3243ECWI+
0°C to +70°C
MAX3243ECAI+
0°C to +70°C
28 Wide SO
28 SSOP
MAX3243ECUI+
0°C to +70°C
28 TSSOP
MAX3243EEWI+
-40°C to +85°C
28 Wide SO
MAX3243EEAI+
-40°C to +85°C
28 SSOP
MAX3243EEUI+
-40°C to +85°C
28 TSSOP
MAX3243ECTJ+
0°C to +70°C
32 TQFN-EP*
MAX3243EETJ+
-40°C to +85°C
32 TQFN-EP*
*Exposed pad.
+Denotes a lead(Pb)-free/RoHS-compliant package.
___________________Chip Information
PROCESS: BiCMOS
Maxim Integrated
MAX3221E/MAX3223E/MAX3243E
±15kV ESD-Protected, 1µA, 3.0V to 5.5V, 250kbps,
RS-232 Transceivers with AutoShutdown
+3.3V
26
0.1µF
28
C1
0.1µF
24
1
C2
0.1µF
2
LOGIC
INPUTS
VCC
27
C1+
V+
C3
0.1µF
C1C2+
COMPUTER SERIAL PORT
3
MAX3243E
V-
C4
0.1µF
C2-
14
T1IN
T1OUT
9
+V
13
T2IN
T2OUT
10
+V
12
T3IN
T3OUT
11
-V
20
R2OUTB
19
R1OUT
GND
R1IN
4
R2IN
5
Tx
5kΩ
18
R2OUT
5kΩ
LOGIC
OUTPUTS
17
R3OUT
R3IN
6
RS-232
INPUTS
5kΩ
16
R4OUT
R4IN
7
5kΩ
15
VCC
VCC
TO POWERMANAGEMENT
UNIT
23
22
21
R5OUT
R5IN
8
SERIAL
MOUSE
5kΩ
FORCEON
FORCEOFF
INVALID
GND
25
Figure 12b. Mouse Driver Test Circuit
Maxim Integrated
15
MAX3221E/MAX3223E/MAX3243E
±15kV ESD-Protected, 1µA, 3.0V to 5.5V, 250kbps,
RS-232 Transceivers with AutoShutdown
Typical Operating Circuits
+3.3V
15
0.1µF
CBYPASS
2 C1+
C1
0.1µF
4
5
C2
0.1µF
6
C1-
VCC
3
V+
MAX3221E*
C2+
V-
C3
0.1µF
C4
0.1µF
C2-
11 T1IN
+3.3V
7
12
INVALID 10
FORCEOFF 16
FORCEON
GND
TO POWERMANAGEMENT
UNIT
2
LOGIC
INPUTS
VCC
14
C1
0.1µF
C2
0.1µF
0.1µF
2 C1+
4 C1-
6
C3
0.1µF
MAX3243E
V-
3
C4
0.1µF
C2-
14 T1IN
T1OUT 9
13 T2IN
T2OUT 10
12 T3IN
T3OUT 11
RS-232
OUTPUTS
R1IN 4
19
5kΩ
VCC
3
V+
MAX3223E**
C2+
V-
18 R2OUT
C3
0.1µF
7
C4
0.1µF
C2-
LOGIC
OUTPUTS
R2IN
5
5kΩ
17 R3OUT
R3IN 6
RS-232
INPUTS
5kΩ
13 T1IN
TTL/CMOS
INPUTS
C2+
19 R1OUT
5
27
V+
20 R2OUTB
+3.3V
CBYPASS
VCC
24 C1-
C2
0.1µF
5kΩ
1 EN
28 C1+
1
R1IN 8
26
0.1µF
C1
0.1µF
T1OUT 13
9 R1OUT
CBYPASS
T1OUT 17
T2OUT 8
12 T2IN
16 R4OUT
RS-232
OUTPUTS
R4IN 7
5kΩ
15 R5OUT
R1IN 16
15 R1OUT
TTL/CMOS
OUTPUTS
23
RS-232
INPUTS
5kΩ
R2IN
10 R2OUT
9
VCC
TO POWERMANAGEMENT UNIT
5kΩ
22
R5IN 8
5kΩ
FORCEON
FORCEOFF
21 INVALID
GND
25
INVALID 11
1 EN
14
FORCEOFF 20
FORCEON
GND
TO POWERMANAGEMENT
UNIT
VCC
*MAX3221E PIN OUT REFERS TO SSOP/TSSOP PACKAGES.
**MAX3223E PIN OUT REFERS TO DIP/SSOP/TSSOP PACKAGES.
18
16
Maxim Integrated
MAX3221E/MAX3223E/MAX3243E
±15kV ESD-Protected, 1µA, 3.0V to 5.5V, 250kbps,
RS-232 Transceivers with AutoShutdown
Pin Configurations
TOP VIEW
+
+
EN 1
EN 1
16 FORCEOFF
15 VCC
C1+ 2
V+ 3
14 GND
C1+ 2
19 VCC
V+ 3
18 GND
13 T1OUT
C1- 4
C2+ 5
12 FORCEON
C2+ 5
C2- 6
11 T1IN
C2- 6
MAX3221E
C1- 4
V- 7
17 T1OUT
MAX3223E
16 R1IN
15 R1OUT
V- 7
10 INVALID
9 R1OUT
R1IN 8
20 FORCEOFF
SSOP/TSSOP
14 FORCEON
T2OUT 8
13 T1IN
R2IN 9
12 T2IN
R2OUT 10
11 INVALID
EN
SHDN
R1OUTB
R2OUTB
R1OUT
R2OUT
23
22
21
20
19
18
17
C2- 2
27 V+
V- 3
26 VCC
R1IN 4
25 GND
N.C.
25
16
N.C.
R2IN 5
24 C1-
VCC
26
15
R3OUT
23 FORCEON
V+
27
14
R4OUT
R4IN 7
22 FORCEOFF
C1+
28
13
R5OUT
R5IN 8
21 INVALID
C2+
29
12
T1IN
T1OUT 9
20 R2OUTB
C2-
30
11
T2IN
T2OUT 10
19 R1OUT
V-
31
10
T3IN
T3OUT 11
18 R2OUT
N.C.
32
9
N.C.
T3IN 12
17 R3OUT
T2IN 13
16 R4OUT
1
2
3
T1IN 14
15 R5OUT
R3IN
C1-
24
28 C1+
R2IN
TOP VIEW
C2+ 1
R1IN
+
GND
DIP/SSOP/TSSOP
SO/SSOP/TSSOP
MAX3243E
4
5
6
7
8
R5IN
T1OUT
T2OUT
T3OUT
+
R4IN
MAX3243E
R3IN 6
TQFN-EP
*CONNECT EP TO GND OR LEAVE UNCONNECTED
Maxim Integrated
17
MAX3221E/MAX3223E/MAX3243E
±15kV ESD-Protected, 1µA, 3.0V to 5.5V, 250kbps,
RS-232 Transceivers with AutoShutdown
Pin Configurations (continued)
VCC
GND
T1OUT
FORCEON
T1OUT
R1IN
R1OUT
FORCEON
T1IN
TOP VIEW
12
11
10
9
15
14
13
12
11
FORCEOFF 13
8
T1IN
EN 14
7
INVALID
6
R1OUT
10
T2IN
VCC 17
9
INVALID
8
R2OUT
7
R2IN
6
T2OUT
FORCEOFF 18
MAX3221E*
V+ 15
GND 16
MAX3223E*
EN 19
3
4
1
2
C1+
C1-
TQFN
3
4
5
V-
2
C2-
1
V-
+
C2-
V+ 20
C2+
R1IN
C2+
5
+
C1-
C1+ 16
TQFN
*CONNECT EP TO GND OR LEAVE UNCONNECTED
*CONNECT EP TO GND OR LEAVE UNCONNECTED
Package Information
For the latest package outline information and land patterns (footprints), go to www.maxim-ic.com/packages. Note that a “+”, “#”, or
“-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status.
PACKAGE CODE
OUTLINE NO.
LAND
PATTERN NO.
16 TQFN-EP
T1655+2
21-0140
90-0072
16 SSOP
A16+2
21-0056
90-0106
16 TSSOP
U16+1
21-0066
90-0117
20 TQFN-EP
T2055+5
21-0140
90-0010
20 SSOP
A20+2
21-0056
90-0094
20 TSSOP
U20+2
21-0066
90-0116
PACKAGE TYPE
18
20 PDIP
P20+3
21-0043
—
28 Wide SO
W28+6
21-0042
90-0109
28 SSOP
A28+1
21-0056
90-0095
28 TSSOP
U28+2
21-0066
90-0171
32 TQFN-EP
T3277+2
21-0144
90-0125
Maxim Integrated
MAX3221E/MAX3223E/MAX3243E
±15kV ESD-Protected, 1µA, 3.0V to 5.5V, 250kbps,
RS-232 Transceivers with AutoShutdown
Revision History
REVISION
NUMBER
REVISION
DATE
7
8/11
DESCRIPTION
Added MAX3223EEUP/V+ automotive qualified part and updated Ordering
Information to show lead-free versions
PAGES
CHANGED
1, 2, 14, 17, 18
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied.
Maxim reserves the right to change the circuitry and specifications without notice at any time. The parametric values (min and max limits) shown in the Electrical
Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance.
Maxim Integrated 160 Rio Robles, San Jose, CA 95134 USA 1-408-601-1000
© Maxim Integrated
19
The Maxim logo and Maxim Integrated are trademarks of Maxim Integrated Products, Inc.