MAXIM MAX4060_11

19-2408; Rev 3; 4/11
Differential Microphone Preamplifiers with
Internal Bias and Complete Shutdown
The MAX4060/MAX4061/MAX4062 are differential-input
microphone preamplifiers optimized for notebook and
PDA audio systems. These devices feature adjustable
gain with excellent power-supply rejection and common-mode rejection ratios, making them ideal for lownoise applications in portable audio systems.
The MAX4060/MAX4062 are capable of switching their
output between the differential input and a singleended auxiliary microphone amplifier input. In addition,
the MAX4060/MAX4062 have a low-noise microphone
bias generator. The differential gain of the
MAX4061/MAX4062 is set with a single resistor. The
MAX4060 has a fixed gain of 10V/V and is PC99/2001
compliant. The MAX4061 includes a complete shutdown mode. In shutdown, the supply current is
reduced to 0.3µA and the current to the microphone
bias is cut off for ultimate power savings.
The MAX4060 operates from a 4.5V to 5.5V single supply and the MAX4061/MAX4062 operate from 2.4V to
5.5V. All devices are specified over the extended operating temperature range, -40°C to +85°C. The
MAX4060/MAX4061 are available in tiny 8-pin TDFN
(3mm x 3mm x 0.8mm) and 8-pin µMAX® packages.
The MAX4062 is available in a 10-pin µMAX package.
Features
o
o
o
o
o
o
o
o
o
o
o
o
2.4V to 5.5V Single-Supply Operation
Adjustable Gain or Fixed-Gain Options
High PSRR (86dB at 1kHz)
High CMRR (70dB at 1kHz)
Low Input-Referred Noise
Integrated Microphone Bias
750µA Supply Current
0.3µA Shutdown Current
±4kV ESD Protection (AUX_IN)
Rail-to-Rail Outputs
THD+N: 0.04% at 1kHz
Available in Space-Saving Packages
8-Pin TDFN (MAX4060/MAX4061)
8-Pin µMAX (MAX4060/MAX4061)
10-Pin µMAX (MAX4062)
Typical Operating Circuit
2.4V TO 5.5V
Applications
Notebook Audio
Systems
Tablet PCs
USB Audio Peripherals
PDA Audio Systems
Signal Conditioning
BIAS
4
VCC
AES-42-Compliant
Microphones
MAX4060
8 AUX_IN
x10
INT/AUX 1
Ordering Information
PART
TEMP
RANGE
PINPACKAGE
TOP
MARK
MAX4060ETA+
-40°C to +85°C
8 TDFN-EP*
ABY
MAX4060EUA+
-40°C to +85°C
8 µMAX
MAX4061ETA+
-40°C to +85°C
8 TDFN-EP*
MAX4061EUA+
-40°C to +85°C
8 µMAX
—
MAX4062EUB+
-40°C to +85°C
10 µMAX
—
—
BIAS
OUT 2
5 IN+
ABZ
*EP = Exposed pad.
+Denotes a lead(Pb)-free/RoHS-compliant package.
x10
6 IN-
BIAS
BIAS 3
VBIAS
GND
Pin Configurations and Selector Guide appear at end of
data sheet.
7
µMAX is a registered trademark of Maxim Integrated Products, Inc.
________________________________________________________________ Maxim Integrated Products
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
1
MAX4060/MAX4061/MAX4062
General Description
MAX4060/MAX4061/MAX4062
Differential Microphone Preamplifiers with
Internal Bias and Complete Shutdown
ABSOLUTE MAXIMUM RATINGS
Supply Voltage (VCC to GND). .................................-0.3V to +6V
Any Other Pin to GND ................................-0.3V to (VCC + 0.3V)
Duration of Short Circuit to GND or VCC ....................Continuous
Continuous Input Current (any pin) ................................ ±10mA
Continuous Power Dissipation (TA = +70°C)
8-Pin TDFN (derate 24.4mW/°C above +70°C) ......1951.2mW
8-Bump µMAX (derate 4.8mW/°C above +70°C) .....387.8mW
10-Bump µMAX (derate 8.8mW/°C above +70°C) ..707.3mW
Operating Temperature Range ...........................-40°C to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Soldering Temperature (reflow) .......................................+260°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(V CC = 3V for MAX4061/MAX4062, V CC = 5V for MAX4060, V GND = 0V, V SHDN = V CC , V INT/AUX = 0V, R G = 11.11kΩ,
RL = 100kΩ to 1.5V, RBIAS = ∞, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Notes 1, 2)
PARAMETER
SYMBOL
Supply Voltage Range
VCC
Supply Current
ICC
Output Common-Mode Voltage
Slew Rate
CONDITIONS
Inferred from
PSRR test
Supply Current in Shutdown
I SHDN
Output Short-Circuit Current
ISC
TYP
MAX
2.4
5.5
MAX4060
4.5
5.5
VOCM
SR
MIN
MAX4061/MAX4062
1.25
0.75
1.2
1.5
1.75
±1
AV = 10V/V
V SHDN = 0V, MAX4061
0.001
To GND
30
To VCC
30
UNITS
V
mA
V
V/µs
1
µA
mA
DIFFERENTIAL INPUT (VINT/AUX = 0V for MAX4060/MAX4062, default for MAX4061)
Input Offset Voltage
VOS
Common-Mode Input Voltage
Range
VCM
Maximum Differential Input
Voltage
Small-Signal Bandwidth
Input Resistance
Input Resistance Match
Input Noise-Voltage Density
RMS Output Noise Voltage
2
VDIFFMAX
±0.1
1
AV = 1V/V, MAX4061/MAX4062
BW-3dB
RIN
Either differential input
RMATCH
en
VNRMS
±5
mV
2
V
1
V
600
kHz
100
kΩ
1
%
AV = 10V/V, f = 1kHz
100
AV = 100V/V, f = 1kHz, MAX4061/MAX4062
only
20
AV = 10V/V, BW = 22Hz to 22kHz
125
nV/√Hz
_______________________________________________________________________________________
µVRMS
Differential Microphone Preamplifiers with
Internal Bias and Complete Shutdown
(V CC = 3V for MAX4061/MAX4062, V CC = 5V for MAX4060, V GND = 0V, V SHDN = V CC , V INT/AUX = 0V, R G = 11.11kΩ,
RL = 100kΩ to 1.5V, RBIAS = ∞, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Notes 1, 2)
PARAMETER
SYMBOL
Total Harmonic Distortion
Plus Noise
Differential Gain
THD+N
AVDIFF
CONDITIONS
AV = 10V/V, f = 1kHz, VOUT = 0.7VRMS,
BW = 22Hz to 22kHz
1V < VCM < 2V,
VOUT = 0.7VRMS,
MAX4061/MAX4062
RG = open
Power-Supply Rejection Ratio
CMRR
PSRR
TYP
MAX
0.04
1
1.13
1.3
9.6
10
10.4
RG = 1.01kΩ
96
100
104
9.6
10.0
10.4
TA = +25°C
72
89
TA = TMIN to TMAX
60
VCM = 500mVP-P, f = 1kHz
70
VCC = 5V ±100mV, f = 1kHz
UNITS
%
RG = 11.11kΩ
1V < VCM < 2V, VOUT = 0.7VRMS, MAX4060
Common-Mode Rejection Ratio
MIN
V/V
dB
dB
86
AUXILIARY INPUT (MAX4060/MAX4062, INT/AUX = VCC)
Small-Signal Bandwidth
BW-3dB
Input Resistance
RIN
Input Noise-Voltage Density
en
RMS Output Noise Voltage
Total Harmonic Distortion
Plus Noise
200
kHz
100
kΩ
f = 1kHz
45
nV/√Hz
VNRMS
BW = 22Hz to 22kHz
385
μVRMS
THD+N
f = 1kHz, BW = 22Hz to 22kHz
0.05
%
Power-Supply Rejection Ratio
PSRR
Voltage Gain
AVAUX
TA = +25°C
65
90
TA = TMIN - TMAX
50
VOUT = 0.7VRMS
-10.7
-10
IBIAS = 0.8mA to GND, MAX4060
2
2.2
IBIAS = 0.5mA to GND, MAX4062
2
2.2
IBIAS = 0.8mA to GND, MAX4060
(TA = +25°C)
2
2.5
dB
-9.3
V/V
BIAS OUTPUT (MAX4060/MAX4062)
Output Voltage
VOUT
Output Resistance
ROUT
Output Noise Voltage
VNRMS
IBIAS = 0.5mA to GND, MAX4062
(TA = +25°C)
22
IBIAS = 0.8mA to GND, BW = 22Hz to
22kHz, MAX4060
50
IBIAS = 0.5mA to GND, BW = 22Hz to
22kHz, MAX4062
20
V
kΩ
40
Ω
μVRMS
_______________________________________________________________________________________
3
MAX4060/MAX4061/MAX4062
ELECTRICAL CHARACTERISTICS (continued)
MAX4060/MAX4061/MAX4062
Differential Microphone Preamplifiers with
Internal Bias and Complete Shutdown
ELECTRICAL CHARACTERISTICS (continued)
(V CC = 3V for MAX4061/MAX4062, V CC = 5V for MAX4060, V GND = 0V, V SHDN = V CC , V INT/AUX = 0V, R G = 11.11kΩ,
RL = 100kΩ to 1.5V, RBIAS = ∞, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Notes 1, 2)
PARAMETER
SYMBOL
CONDITIONS
MAX4060
Power-Supply Rejection Ratio
IBIAS = 0.8mA to GND,
VCC = 4.5V to 5.5V
MIN
TYP
50
80
IBIAS = 0.8mA, VCC = 5V
+ 100mVP-P, f = 1kHz
PSRR
MAX4062
IBIAS = 0.5mA to GND,
VCC = 2.4V to 5.5V
MAX
UNITS
70
dB
50
IBIAS = 0.5mA, VCC = 3V
+ 100mVP-P, f = 1kHz
74
71
DIGITAL INPUTS (SHDN for MAX4061 and INT/AUX for MAX4060/MAX4062)
Input Leakage Current
IIN
Input-Voltage High
VINH
Input-Voltage Low
VINL
±1
VIN = 0V or VCC
0.7 x
VCC
μA
V
0.3 x
VCC
V
Shutdown Enable Time
tON
MAX4061
10
μs
Shutdown Disable Time
tOFF
MAX4061
10
μs
Note 1: All specifications are 100% tested at TA = +25°C. Specification limits over temperature (TA = TMIN to TMAX) are guaranteed
by design, not production tested.
Note 2: MAX4062 requires a 1μF capacitor from BIAS to ground.
4
_______________________________________________________________________________________
Differential Microphone Preamplifiers with
Internal Bias and Complete Shutdown
POWER-SUPPLY REJECTION RATIO
vs. FREQUENCY (DIFF INPUT)
-20
PSRR (dB)
-60
-9
-80
-12
-100
-15
100
1k
10k
100k
1M
VCC = 3V
0.4
0.2
AV = 100V/V
0
-120
10
10
100
1k
10k
100k
-40 -25 -10
1M
5
20
35
50
65
FREQUENCY (Hz)
FREQUENCY (Hz)
TEMPERATURE (°C)
SUPPLY CURRENT vs. SUPPLY VOLTAGE
SHUTDOWN SUPPLY CURRENT
vs. TEMPERATURE
OUTPUT-VOLTAGE HIGH
vs. TEMPERATURE
0.6
0.5
0.4
0.3
0.2
AV = 10V/V
NO LOAD
VOH = VCC - VOUT
ILOAD = 2.5mA
100
1
0.1
10
0.01
ILOAD = 50μA
0
0.001
2.5
3.0
3.5
4.0
4.5
5.0
5.5
1
-40
-15
10
35
60
85
-15
10
35
60
TEMPERATURE (°C)
TEMPERATURE (°C)
OUTPUT-VOLTAGE LOW
vs. TEMPERATURE
OUTPUT-VOLTAGE HIGH
vs. LOAD CURRENT
OUTPUT-VOLTAGE LOW
vs. LOAD CURRENT
175
MAX4060 toc07
1000
VOH = VCC - VOUT
150
ILOAD = 2.5mA
VOH (mV)
VOL (mV)
75
10
35
TEMPERATURE (°C)
60
85
VCC = 3V
150
50
25
0
0
-15
250
100
50
1
300
200
100
10
ILOAD = 50μA
85
VCC = 3V
125
100
-40
-40
SUPPLY VOLTAGE (V)
VOL (mV)
2.0
MAX4060 toc06
1000
MAX4060 toc09
0.1
10
80
VOH (mV)
0.7
100
MAX4060 toc05
MAX4060 toc04
0.8
SHUTDOWN SUPPLY CURRENT (nA)
0.9
SUPPLY CURRENT (mA)
AV = 10V/V
VCC = 5V
0.6
MAX4060 toc08
GAIN (dB)
-40
-6
0.8
SUPPLY CURRENT (mA)
0
-3
1.0
MAX4060 toc02
MAX4060 toc01
VCC = 5V
3
SUPPLY CURRENT vs. TEMPERATURE
0
MAX4060 toc03
GAIN vs. FREQUENCY
(NO LOAD)
0
1
2
3
LOAD CURRENT (mA)
4
5
0
1
2
3
4
5
LOAD CURRENT (mA)
_______________________________________________________________________________________
5
MAX4060/MAX4061/MAX4062
Typical Operating Characteristics
(VCC = 3V (MAX4061/MAX4062), VCC = 5V for MAX4060, AV = 10V/V, RL ≥ 100kΩ to 1.5V, SHDN = VCC (MAX4061 only),
TA = +25°C, unless otherwise noted.)
Typical Operating Characteristics (continued)
(VCC = 3V (MAX4061/MAX4062), VCC = 5V for MAX4060, AV = 10V/V, RL ≥ 100kΩ to 1.5V, SHDN = VCC (MAX4061 only),
2.275
TOTAL HARMONIC DISTORTION PLUS NOISE
vs. FREQUENCY (AUX INPUT)
VOUT = 2.26VP-P
1
MAX4060 toc12
IBIAS = 800μA
VOUT = 2.26VP-P
2.250
VCC = 3V
2.200
VCC = 5V
2.175
VCC = 3V
0.1
THD+N (%)
0.1
2.225
THD+N (%)
MIC BIAS VOLTAGE (V)
1
MAX4060 toc10
2.300
TOTAL HARMONIC DISTORTION PLUS NOISE
vs. FREQUENCY (DIFF INPUT)
MAX4060 toc11
MAX4060
MIC BIAS VOLTAGE vs. TEMPERATURE
VCC = 5V
0.01
0.01
2.150
2.125
2.100
0.001
-40
-15
10
35
85
60
100
1k
10k
100k
10
100
1k
10k
FREQUENCY (Hz)
TOTAL HARMONIC DISTORTION PLUS NOISE
vs. OUTPUT AMPLITUDE
(DIFF INPUT, VCC = 3V)
TOTAL HARMONIC DISTORTION PLUS NOISE
vs. OUTPUT AMPLITUDE
(DIFF INPUT, VCC = 5V)
TOTAL HARMONIC DISTORTION PLUS NOISE
vs. OUTPUT AMPLITUDE
(AUX INPUT, VCC = 3V)
f = 1kHz
THD+N (%)
f = 1kHz
0.1
BW = 22kHz
1
THD+N (%)
1
10
MAX4060 toc15
BW = 22kHz
MAX4060 toc14
MAX4060 toc13
10
1
0.1
0.1
f = 1kHz
f = 10kHz
f = 10kHz
f = 10kHz
0.01
0.01
0.01
0.001
0.001
0
0.5
1.0
1.5
2.0
2.5
0
3.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
0.001
0
0.5
1.0
1.5
2.0
2.5
OUTPUT VOLTAGE (VP-P)
OUTPUT VOLTAGE (VP-P)
OUTPUT VOLTAGE (VP-P)
TOTAL HARMONIC DISTORTION PLUS NOISE
vs. OUTPUT AMPLITUDE
(AUX INPUT, VCC = 5V)
INPUT-REFERRED NOISE
vs. FREQUENCY (DIFF INPUT)
MAX4060
MIC BIAS OUTPUT NOISE
MAX4060 toc17
BW = 22kHz
3.0
MAX4060 toc18
800
MAX4060 toc16
10
700
VCC = 5V
BW = 22Hz TO 22kHz
600
(nV/√Hz)
1
f = 1kHz
0.1
500
400
5μV/div
300
f = 10kHz
0.01
200
100
0
0.001
0
0.5
1.0
1.5
2.0
2.5
OUTPUT VOLTAGE (VP-P)
6
100k
FREQUENCY (Hz)
BW = 22kHz
THD+N (%)
0.001
10
TEMPERATURE (°C)
10
THD+N (%)
MAX4060/MAX4061/MAX4062
Differential Microphone Preamplifiers with
Internal Bias and Complete Shutdown
3.0
3.5
10
100
1k
10k
100k
100ms/div
FREQUENCY (Hz)
_______________________________________________________________________________________
Differential Microphone Preamplifiers with
Internal Bias and Complete Shutdown
SMALL-SIGNAL TRANSIENT RESPONSE
FOR DIFF INPUT
MAX4062
MIC BIAS OUTPUT NOISE
MAX4060 toc20
MAX4060 toc19
VCC = 5V
BW = 22Hz TO 22kHz
INPUT
5mV/div
5μV/div
OUTPUT
50mV/div
10μs/div
100ms/div
SMALL-SIGNAL TRANSIENT RESPONSE
FOR AUX INPUT
LARGE-SIGNAL TRANSIENT RESPONSE
FOR DIFF INPUT
MAX4060 toc21
MAX4060 toc22
INPUT
100mV/div
INPUT
5mV/div
OUTPUT
1V/div
OUTPUT
50mV/div
10μs/div
10μs/div
LARGE-SIGNAL TRANSIENT RESPONSE
FOR AUX INPUT
OUTPUT OVERDRIVEN
MAX4060 toc23
MAX4060 toc24
INPUT
200mV/div
DIFFERENTIAL INPUT
INPUT
500mV/div
OUTPUT
1V/div
10μs/div
OUTPUT
1V/div
10μs/div
_______________________________________________________________________________________
7
MAX4060/MAX4061/MAX4062
Typical Operating Characteristics (continued)
(VCC = 3V (MAX4061/MAX4062), VCC = 5V for MAX4060, AV = 10V/V, RL ≥ 100kΩ to 1.5V, SHDN = VCC (MAX4061 only),
TA = +25°C, unless otherwise noted.)
Differential Microphone Preamplifiers with
Internal Bias and Complete Shutdown
MAX4060/MAX4061/MAX4062
Pin Description
PIN
NAME
FUNCTION
2
INT/AUX
Internal (Differential) or Auxiliary (Single-Ended) Input Select. Drive INT/AUX low
to select internal or high to select auxiliary microphone input.
3
3
OUT
Amplifier Output. OUT is high impedance when in shutdown mode.
3
—
—
BIAS
External Electret Microphone Capsule Bias Output. BIAS has a greater than
2kΩ output impedance.
4
4
5
VCC
Power Supply. Bypass the VCC to GND with a 0.1µF capacitor.
5
5
6
IN+
Noninverting Differential Amplifier Input. AC-couple the audio signal into IN+.
6
6
7
IN-
Inverting Differential Amplifier Input. AC-couple the audio signal into IN-.
7
7
8
GND
8
—
9
AUX_IN
Single-Ended Input for Auxiliary Microphone. AC-couple the audio signal into
AUX_IN.
—
1
1
G2
Gain-Selectable Input. Connect an external resistor between G1 and G2 to set
the gain for the differential amplifier. (See Adjustable Differential-Gain Setting
section.)
—
2
—
SHDN
Shutdown Input. Drive SHDN high for normal operation. Drive SHDN low for
shutdown mode.
—
—
4
BIAS
External Electret Microphone Capsule Bias Output. Bypass BIAS with 1µF
capacitor to ground.
—
8
10
G1
Gain-Selectable Input. Connect an external resistor between G1 and G2 to set
the gain for the differential amplifier.
—
—
—
EP
Exposed Pad (TDFN Only). Internally connected to GND. Connect to a large
ground plane to minimize thermal performance. Not intended as an electrical
connection point.
MAX4060
MAX4061
MAX4062
1
—
2
Ground
Detailed Description
The MAX4060/MAX4061/MAX4062 are differential microphone preamplifiers providing high-quality audio, optimized for use in computer and mobile applications.
These devices feature rail-to-rail outputs, very high
power-supply rejection, and common-mode rejection,
making them ideal for low-noise applications. The
MAX4060/MAX4061/MAX4062 are particularly effective
when layout constraints force the microphone amplifier to
be physically remote from the ECM microphone and/or
the rest of the audio circuitry.
The MAX4060/MAX4062 are capable of switching their
output between the differential input and an inverting
single-ended input. INT/AUX selects either the differential input or single-ended auxiliary input. In addition, the
MAX4060 has an internal bias generator to bias the
microphone in either differential or single-ended
modes. The MAX4061 includes a complete 0.3µA shut8
down mode for ultimate power savings. The differential
gain of the MAX4061/MAX4062 is set with a single
resistor connected between the G1 and G2 pins. The
MAX4060 has a fixed gain of 10V/V.
Differential Input
The main microphone input is a low-noise, differential
input structure. This is an almost essential element
when faced with amplification of low-amplitude analog
signals in digitally intense environments such as notebook PCs or PDAs. Used correctly, the advantages
over a single-ended solution are:
• Better power-supply noise rejection.
• Less degradation from noise in PC board ground
planes.
• The microphone and preamplifier can be placed
physically further apart, easing PC board layout
restrictions.
_______________________________________________________________________________________
Differential Microphone Preamplifiers with
Internal Bias and Complete Shutdown
2.4V TO 5.5V
BIAS
4
VCC
MAX4060
8 AUX_IN
x10
INT/AUX 1
BIAS
OUT 2
5 IN+
x10
6 IN-
BIAS
BIAS 3
VBIAS
GND
7
Fixed Differential Gain (MAX4060)
The MAX4060 has an internal fixed gain of 10V/V for its
differential input. This feature simplifies design, reduces
pin count, footprint, and eliminates external gain-setting
resistors.
Adjustable Differential-Gain Setting
The MAX4061/MAX4062 allow the user to alter the gain
to optimize the signal-to-noise ratio (SNR) of their system. The gain is set by a single external resistor (RG)
connected between the G1 and G2 pins, where:
RG = 100kΩ / (AV - 1)
where AV is the required voltage gain.
Hence, an 11.11kΩ resistor yields a gain of 10V/V, or
20dB. Leaving the pins unconnected results in a gain
of 1V/V. Gain for the MAX4061/MAX4062 is defined as:
AV = VOUT / (VIN+ - VIN-)
The resistor can be either fixed or variable, allowing the
use of a digitally controlled potentiometer to alter the
gain under software control.
Input Capacitors
The two differential microphone inputs and the singleended auxiliary input of the MAX4060/MAX4061/
MAX4062 have on-chip bias components, allowing the
user to AC-couple any signals onto the input. The input
resistance is 100kΩ (typ), so the capacitor size may be
chosen accordingly to define the LF rolloff desired. This
can be calculated as:
CIN = 1 / (2πfCUTRIN)
This assumes a low source impedance driving the inputs.
A further consideration for the differential input is the
effect of these series input capacitors on low-frequency,
common-mode rejection. Any mismatch in the values of
these two capacitors degrades the CMRR at frequencies where the impedance of the capacitor is significant
compared to the input resistance of the amplifier—this is
usually most noticeable at low frequencies. One way to
avoid the need for matched or tight tolerance capacitors is to deliberately oversize the values on the differ-
_______________________________________________________________________________________
9
MAX4060/MAX4061/MAX4062
Functional Diagram
MAX4060/MAX4061/MAX4062
Differential Microphone Preamplifiers with
Internal Bias and Complete Shutdown
2.4V TO 5.5V
5
100kΩ
VCC
RBIAS
4 BIAS
VBIAS
CBIAS
MAX4062
9 AUX_IN
x10
INT/AUX 2
OUT 3
6 IN+
7 IN-
G1 10
G2 1
GND
8
Figure 1. MAX4062 with Auxiliary Input Configuration
ential inputs and to set the lower 3dB point (fCUT) of the
amplifier by sizing the output capacitor appropriately.
The input impedance matching on the differential input
is typically 1%, allowing input capacitor matching to be
effective at improving low-frequency PSRR.
Common-Mode Rejection Ratio
The common-mode rejection ratio (CMRR) refers to the
amount of rejection that the amplifier is capable of providing to any signal applied equally to the IN+ and INinputs. In the case of amplifying low-level microphone
signals in noisy digital environments, it is a key figure of
merit. In audio circuits, this is generally measured for
VIN as an AC signal:
CMRR(dB) = ADM / ACM
where ADM is the differential gain, ACM is the commonmode gain.
Input voltages are sufficiently small such that the output
is not clipped in either differential or common-mode
application. The topology used in the MAX4061/
MAX4062 means that the CMRR actually improves at
higher differential gains—another advantage of using
differential sensing.
10
Auxiliary Input
The auxiliary input is a single-ended input intended to
be used with a jack-socket-type microphone input
(Figure 1). Internal DC-bias components (as on the
main inputs) allow the input signal to be AC-coupled.
Mechanically switched jack sockets can be used in
conjunction with the INT/AUX select pin, allowing the
auxiliary microphone input to be automatically selected
when a jack socket is inserted.
Microphone Bias Voltage
MAX4060
The MAX4060 has a microphone bias voltage designed
to comply with the Microsoft/Intel PC99/2001 audio
standard. It features source impedance of greater than
2kΩ, and delivers more than 2V of bias when loaded
with a current of 800μA. This limits operation of this part
to supplies between 4.5V to 5.5V (see Figure 2).
______________________________________________________________________________________
Differential Microphone Preamplifiers with
Internal Bias and Complete Shutdown
MAX4060/MAX4061/MAX4062
4.5V TO 5.5V
4
VCC
MICROPHONE
INPUT
MAX4060
8 AUX_IN
x10
3 BIAS
INT/AUX
1
OUT
2
VBIAS
RBIAS
5 IN+
x10
6 INGND
7
Figure 2. MAX4060 Used for Biasing a Microphone
MAX4061/MAX4062
The MAX4062 has a lower bias voltage and low-impedance outputs (optimum electret bias resistor can then
be set externally). This gives a low-noise, flexible solution that can run from 2.4V to 5.5V, suitable for handheld devices such as PDAs that typically have audio
power supplies in the 3V region (see Figure 3).
In applications where the differential microphone is
placed some distance from the MAX4060/MAX4061/
MAX4062, using a remote differential bias scheme as
shown in Figure 4 can provide improved noise rejection.
Output
MAX4060/MAX4061 DC Bias
The output voltage has a DC-bias voltage independent
of the power supplies, resulting in superior PSRR performance. The MAX4061 output is high impedance
when the part is in shutdown mode. AC-coupling the
output into the next audio stage (e.g., CODEC) is recommended.
Applications Information
Shutdown Mode
The MAX4061 features a low-power, complete shutdown mode. When SHDN goes low, the supply current
drops to 0.3μA, the output enters a high-impedance
state, and the bias current to the microphone is
switched off. Driving SHDN high enables the amplifier.
SHDN should not be left unconnected.
Power Supplies and Layout
The MAX4060 operates from a 4.5V to 5.5V single supply and the MAX4061/MAX4062 operate from a 2.4V to
5.5V single supply. Bypass the power supply with a
0.1μF capacitor to ground. In systems where analog
and digital grounds are available, the MAX4060/
MAX4061 should be connected to the analog ground.
______________________________________________________________________________________
11
MAX4060/MAX4061/MAX4062
Differential Microphone Preamplifiers with
Internal Bias and Complete Shutdown
2.4V TO 5.5V
5
VCC
4 BIAS
VBIAS
MAX4062
0.1μF
9 AUX_IN
x10
0.1μF
INT/AUX 2
2.2kΩ
10 G1
RG
11kΩ
OUT 3
1 G2
2.2kΩ
0.1μF
6 IN+
7 IN0.1μF
GND
8
Figure 3. MAX4062 Used to Bias a Microphone Connected to the Auxiliary Input and the Differential Input
12
______________________________________________________________________________________
Differential Microphone Preamplifiers with
Internal Bias and Complete Shutdown
MAX4060/MAX4061/MAX4062
2.4V TO 5.5V
5
VCC
4 BIAS
VBIAS
MAX4062
0.1μF
9 AUX_IN
2.2kΩ
x10
0.1μF
INT/AUX 2
VDD
10 G1
1kΩ
RG
11kΩ
OUT 3
1 G2
1kΩ
2.2μF
0.1μF
6 IN+
7 IN1kΩ
0.1μF
GND
8
1kΩ
2.2μF
Figure 4. Remote Differential Microphone Bias Network Optimizes Noise Rejection in Long-Run, PC Board Traces
Pin Configurations
TOP VIEW
INT/AUX
1
8
AUX_IN
OUT
2
7
GND
BIAS
3
6
VCC
4
5
MAX4060
EP*
G2
1
8
G1
SHDN
2
7
GND
IN-
OUT
3
6
IN-
IN+
VCC
4
5
IN+
µMAX/TDFN
*CONNECT EP TO GND (TDFN ONLY).
MAX4061
EP*
µMAX/TDFN
G2 1
INT/AUX
10 G1
2
MAX4062
9
AUX_IN
OUT
3
8
GND
BIAS
4
7
IN-
VCC
5
6
IN+
µMAX
______________________________________________________________________________________
13
Differential Microphone Preamplifiers with
Internal Bias and Complete Shutdown
MAX4060/MAX4061/MAX4062
Block Diagrams
4.5V TO 5.5V
2.4V TO 5.5V
4
5
VCC
4
VCC
MAX4060
8
VCC
2.4V TO 5.5V
AUX_IN
MAX4062
8 AUX_IN
x10
x10
INT/AUX
3 BIAS
MAX4061
2 SHDN
1
INT/AUX 2
4 BIAS
VBIAS
VBIAS
5 IN+
OUT
5
IN+
6
IN-
2
OUT
OUT 3
3
6 IN+
6 INx10
GND
G1
G2
8
1
GND
7
7 IN-
7
G1
G2
10
1
GND
8
Selector Guide
AUXILIARY
INPUT
DIFF INPUT
GAIN
SINGLE-ENDED
INPUT
GAIN (dB)
MAX4060
✔
20dB
MAX4061
—
ADJ
MAX4062
✔
ADJ
PRODUCT*
MICROPHONE
BIAS
SHUTDOWN
MODE
SUPPLY
VOLTAGE
(V)
20
✔
—
4.5 to 5.5
—
—
✔
2.4 to 5.5
20
✔
—
2.4 to 5.5
*See Block Diagrams.
Package Information
Chip Information
PROCESS: BiCMOS
14
For the latest package outline information and land patterns
(footprints), go to www.maxim-ic.com/packages. Note that a
“+”, “#”, or “-” in the package code indicates RoHS status only.
Package drawings may show a different suffix character, but
the drawing pertains to the package regardless of RoHS status.
PACKAGE
TYPE
PACKAGE
CODE
DOCUMENT LAND PATTERN
NO.
NO.
8 TDFN
T833+2
21-0137
90-0059
8 μMAX
U8+1
21-0036
90-0092
10 μMAX
U10+2
21-0061
90-0030
______________________________________________________________________________________
Differential Microphone Preamplifiers with
Internal Bias and Complete Shutdown
REVISION
NUMBER
REVISION
DATE
3
4/11
DESCRIPTION
Added exposed pad information to Pin Description and Pin Configurations sections
PAGES
CHANGED
8, 13
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
15 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2011 Maxim Integrated Products
Maxim is a registered trademark of Maxim Integrated Products, Inc.
MAX4060/MAX4061/MAX4062
Revision History