Series 262 ® Commercial Miniature 10mm Conductive Plastic Trimmer Potentiometers Features • Miniature size • Adjustment knob slotted for front or rear screwdriver adjustment • P.C. mounting with knob parallel or perpendicular to printed circuit board • Low cost • Low height profile • Wide resistance range • Reliable screened CTS composition element • RoHS Compliant Electrical and Mechanical Specifications Resistance Range Standard: 500 ohms through 2 megohms. Special: Please consult CTS. Resistance Tolerance Standard: ±20% Special: Available ±10%, ±30% Standard Color Chart VALUE COLOR 500Ω 1KΩ 2.5KΩ 5KΩ Green Yellow Red Blue VALUE 10KΩ 25KΩ 50KΩ 100KΩ COLOR VALUE COLOR White 250KΩ Violet Black 500KΩ Brown Orange 1MΩ Light Blue Gray 2MΩ Pink Power Rating, Watts 0.15 watts @ 40°C derated to no load @ 100°C. Angle of Rotation Total Rotation: 265° ± 5° Effective Rotation: 260° (approximately) Voltage Rating Operating maximum — 350 VDC. Load not to exceed wattage rating. Rotational Torque .3 to 5 in-oz (21.6 to 360 gf-cm) Resistance Tapers Linear Stop Strength 16 inch ounces (1.2 kgf-cm) Adjustment Knob Color coded nylon knob with hex hole for top adjustment plus slot for either top or bottom screwdriver adjustment. 1-2 CTS Electronic Components © 2006 CTS Corporation. All rights reserved. Information subject to change. 9/30/06 www.ctscorp.com CTS Type U262 2.64 HEX. x 1.40 DP. .104 HEX. x .055 DP. REF. 1.02 .040 Ø1.30-Ø1.40 1.17 .046 2.79 .110 .051-.055 (3) HLS 0.30 .012 1.40 DP SLOT .055 4.44 .175 5.54 .218 REF. 9.35 .368 3.42 .135 0.89 .035 9.4 .370 10.00 .394 10.0 .394 5.4 .213 5.56 .219 2.50 .098 5.00 .197 3.6 .142 Ø2.5 x 0.8 WIDTH THRU. SLOT .098 x .031 CTS Type X262 2.64 HEX x 1.40 DP. .104 HEX x .055 DP. DIMENSION: mm INCH 4.2 1.02 .040 .165 1.40 DP SLOT .055 4.7 .185 5.54 .218 10.0 .394 3.42 .135 9.35 .368 Ø1.30-Ø1.40 (3) HLS .051-.055 7.2 .283 2.50 .098 4.4 .173 TYP. 1.02 .040 2.5 .098 2.8 .110 5.00 .197 9.4 .370 DIMENSION: CTS Series 262 trimmers are available off the shelf from Distributor Stock under the following part numbers. Distributor Stock Values 500Ω 1KΩ 2.5KΩ 5KΩ 10KΩ 25KΩ 50KΩ 100KΩ 250KΩ 500KΩ 1.0MegΩ 262X 262U Green Yellow Red Blue White Black Orange Gray Violet Brown Light Blue 262XR501B 262XR102B 262XR252B 262XR502B 262XR103B 262XR253B 262XR503B 262XR104B 262XR254B 262XR504B 252XR105B 262UR501B 262UR102B 262UR252B 262UR502B 262UR103B 262UR253B 262UR503B 262UR104B 262UR254B 262UR504B 262UR105B mm INCH Ordering Information 262 X R Type and Part Number Knob Color 2-2 CTS Electronic Components 2.5 .098 Ø2.5 x 0.8 WIDTH THRU SLOT .098 x .031 Standard Stocked Series 262 Trimmers Resistance Value ± 20% 2.50 .098 5.00 .197 0.89 .035 103 B RESISTANCE CODE EXAMPLES MOUNTING STYLE X – VERTICAL MOUNT U – HORIZONTAL MOUNT KNOB TYPE TYPE ADJUSTMENT R – SCREWDRIVER SLOTTED, SMOOTH EDGE CODE RESISTANCE 501 500 OHMS 102 1K 252 2.5K 502 5K 103 10K 253 25K 503 50K 104 100K © 2006 CTS Corporation. All rights reserved. Information subject to change. RESIST TOL A– ±10% B– ±20% C– ±30% 9/30/06 www.ctscorp.com