Pressure Sensors Gage Unamplified Compensated Flow-Through 26PC Series FEATURES 1 Measure positive and negative gage pressures 1 Flow-through port design fits in-line with application 1 Popular port sizes: - 8 mm (.315 in.) OD (1/4 in. ID tubing or standard connectors) - 0.144 in. OD (1/8 in. ID tubing) 1 Medical grade ISO 10993-1 (USP Class 6) port material 1 Silicon sensor chip 1 24 inch wire harness with splash proof connector 1 Minimal deadspace — efficient cleansing and disinfecting Min. Typ. Max. Units Excitation --- 10 16 VDC Repeatability & Hysteresis --- ±0.20 --- % Span Response Time --- --- 1.0 msec Input Resistance 5.5 K 7.5 K 11.5 K ohms Output Resistance 1.5 K 2.5 K 3.0 K ohms Stability over One Year --- ±0.5 --- % Span Weight --- 2 --- grams Unamplified 26PC SERIES PERFORMANCE CHARACTERISTICS at 10.0 ±0.01 VDC Excitation, 25°C Total error calculation, see page 105. ENVIRONMENTAL SPECIFICATIONS Operating Temperature −40° to 85°C (−40° to +185°F) Storage Temperature −55° to +100°C (−67° to +212°F) Compensated Temperature 0° to +50°C (32° to +122°F) Shock Qualification tested to 150 g Vibration MIL-STD-202. Method 213 (150g halfsine, 11 msec) Media (P1 & P2) Limited only to those media which will not attack polyetherimide, silicon, fluorosilicone, silicone, EPDM, and neoprene seals. 26PC SERIES ORDER GUIDE Catalog Listing Pressure Range (psi) Typ. Max Typ. Max Min. Typ. Max. Typ. Max. Min. Typ. 26PCA TYPE 1 0.25 0.5 ±0.5 ±1.0 −1.5 0 +1.5 ±1.0 ±2.0 14.7 16.7 26PCB TYPE 5 0.4 0.5 ±0.5 ±1.0 −1.5 0 +1.5 ±1.0 ±1.5 47 26PCC TYPE 15 0.25 0.5 ±0.5 ±1.0 −1.5 0 +1.5 ±0.75 ±1.5 97 Linearity (% span) Null Shift (mV) Null Offset (mV) Span Shift (% span) Sensitivity mV/psi Overpressure psi Max. Typ. Max. 18.7 16.7 20 50 53 10.0 20 100 103 6.67 45 Span (mV) 26PCD TYPE 30 0.1 0.2 ±0.75 ±1.5 −1.5 0 +1.5 ±0.75 ±1.5 97 100 103 3.33 60 26PCF TYPE 100 0.1 0.2 ±1.0 ±2.0 −2.0 0 +2.0 ±0.5 ±1.5 95 100 105 1.0 200 26PCJ TYPE 38* 0.1 0.5 ±0.7 ±1.5 −1.5 0 +1.5 ±1.0 ±1.5 37.5 39.5 41.5 2.63 60 26PCK TYPE 38* 0.1 0.5 ±0.7 ±1.5 −1.5 0 +1.5 ±1.0 ±1.5 37.5 39.5 41.5 2.63 60 * Accuracy specifications calculated at 15 psi. Honeywell 1 MICRO SWITCH Sensing and Control 1 1-800-537-6945 USA 1 F1-815-235-6847 International 1 1-800-737-3360 Canada 23 Pressure Sensors Gage Unamplified Compensated Flow-Through 26PC Series SENSOR SELECTION GUIDE 2 Product Family 2 20PC Family 6 Circuit Type 6 Compensated, Calibrated PC Pressure Transducer A Pressure Range A 1 psi B 5 psi C 15 psi D 30 psi F 100 psi J 38 psi K 38 psi (passivated) F* Type of Seal E EPDM F Fluorosilicone N Neoprene S Silicone N Port Type G Small N Large (.350 dia.) P Large (.315 dia.) 5 Termination Style G Pressure Measurement 2 4-pin DIP 5 Wire harness 6 4-pin SIP G Gage Example: 26PCBFG5G Compensated, calibrated 5 psi sensor, fluorosilicone seal, small flow-through ports, wire harness, and gage pressure measurements. *Other media seal materials may be available. Note: Not all combinations are established. Contact 800 number before final design. See Accessory Guide, page 27. 24 Honeywell 1 MICRO SWITCH Sensing and Control 1 1-800-537-6945 USA 1 F1-815-235-6847 International 1 1-800-737-3360 Canada