Vishay MBRB20H100CTHE3/81 Dual common-cathode high-voltage schottky rectifier Datasheet

MBR(F,B)20H90CT & MBR(F,B)20H100CT
Vishay General Semiconductor
Dual Common-Cathode High-Voltage Schottky Rectifier
High Barrier Technology for Improved High Temperature Performance
TO-220AB
ITO-220AB
MBR20H90CT
MBR20H100CT
PIN 1
PIN 2
PIN 3
CASE
3
2
1
1
2
3
MBRF20H90CT
MBRF20H100CT
PIN 1
PIN 2
PIN 3
TO-263AB
K
FEATURES
• Guardring for overvoltage protection
• Lower power losses, high efficiency
• Low forward voltage drop
• Low leakage current
• High forward surge capability
• High frequency operation
• Meets MSL level 1, per J-STD-020, LF maximum
peak of 245 °C (for TO-263AB package)
• Solder dip 260 °C, 40 s (for TO-220AB and
ITO-220AB package)
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
2
TYPICAL APPLICATIONS
For use in high frequency rectifier of switching
mode power supplies, freewheeling diodes, dc-to-dc
converters or polarity protection application.
1
MBRB20H90CT
MBRB20H100CT
PIN 1
PIN 2
K
HEATSINK
PRIMARY CHARACTERISTICS
IF(AV)
10 A x 2
VRRM
90 V, 100 V
IFSM
250 A
IR
4.5 µA
VF
0.64 V
TJ max.
175 °C
MECHANICAL DATA
Case: TO-220AB, ITO-220AB, TO-263AB
Epoxy meets UL 94V-0 flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix for consumer grade, meets JESD 201 class
1A whisker test, HE3 suffix for high reliability grade
(AEC Q101 qualified), meets JESD 201 class 2
whisker test
Polarity: As marked
Mounting Torque: 10 in-lbs maximum
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
SYMBOL
MBR20H90CT
MBR20H100CT
UNIT
Maximum repetitive peak reverse voltage
PARAMETER
VRRM
90
100
V
Working peak reverse voltage
VRWM
90
100
V
VDC
90
100
V
Maximum DC blocking voltage
Maximum average forward rectified current
total device
per diode
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load per diode
IF(AV)
20
10
A
IFSM
250
A
Peak repetitive reverse current per diode at tp = 2 µs, 1 kHz
IRRM
1.0
A
Voltage rate of change (rated VR)
dV/dt
10 000
V/µs
TJ, TSTG
- 65 to + 175
°C
VAC
1500
V
Operating junction and storage temperature range
Isolation voltage (ITO-220AB only)
from terminal to heatsink t = 1 min
Document Number: 88673
Revision: 08-Nov-07
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
1
MBR(F,B)20H90CT & MBR(F,B)20H100CT
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
Maximum instantaneous forward voltage per diode
IF = 10 A
IF = 10 A
IF = 20 A
IF = 20 A
(1)
Maximum reverse current per diode at working peak
reverse voltage
SYMBOL
VALUE
UNIT
TC = 25 °C
TC = 125 °C
TC = 25 °C
TC = 125 °C
VF
0.77
0.64
0.88
0.73
V
TJ = 25 °C
TJ = 125 °C
IR
4.5
6.0
µA
mA
Note:
(1) Pulse test: 300 µs pulse width, 1 % duty cycle
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
Typical thermal resistance per diode
SYMBOL
MBR
MBRF
MBRB
UNIT
RθJC
2.0
5.8
2.0
°C/W
ORDERING INFORMATION (Example)
PACKAGE
PREFERRED P/N
UNIT WEIGHT (g)
PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
TO-220AB
MBR20H100CT-E3/45
1.85
45
50/tube
Tube
ITO-220AB
MBRF20H100CT-E3/45
1.99
45
50/tube
Tube
TO-263AB
MBRB20H100CT-E3/45
1.35
45
50/tube
Tube
TO-263AB
MBRB20H100CT-E3/81
1.35
81
800/reel
Tape reel
TO-220AB
MBR20H100CTHE3/45 (1)
1.85
45
50/tube
Tube
ITO-220AB
MBRF20H100CTHE3/45
(1)
1.99
45
50/tube
Tube
TO-263AB
MBRB20H100CTHE3/45 (1)
1.35
45
50/tube
Tube
TO-263AB
(1)
1.35
81
800/reel
Tape reel
MBRB20H100CTHE3/81
Note:
(1) Automotive grade AEC Q101 qualified
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
300
20
Peak Forward Surge Current (A)
Average Forward Current (A)
Resistive or Inductive Load
16
MBR
MBRB
12
8
4
MBRF
TJ = TJ Max.
8.3 ms Single Half Sine-Wave
250
200
150
100
50
0
0
0
50
100
150
180
1
10
100
Case Temperature (°C)
Number of Cycles at 60 Hz
Figure 1. Forward Current Derating Curve
Figure 2. Maximum Non-Repetitive Peak Forward Surge
Current Per Diode
www.vishay.com
2
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
Document Number: 88673
Revision: 08-Nov-07
MBR(F,B)20H90CT & MBR(F,B)20H100CT
Vishay General Semiconductor
10 000
TJ = 175 °C
Junction Capacitance (pF)
Instantaneous Forward Current (A)
100
10
TJ = 125 °C
TJ = 150 °C
TJ = 100 °C
1
TJ = 25 °C
0.1
0.01
0.1
1000
100
10
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
0.1
1
10
100
Instantaneous Forward Voltage (V)
Reverse Voltage (V)
Figure 3. Typical Instantaneous Forward Characteristics Per Diode
Figure 5. Typical Junction Capacitance Per Diode
100
Transient Thermal Impedance (°C/W)
Instantaneous Reverse Current (µA)
10 000
TJ = 150 °C
1000
TJ = 125 °C
100
TJ = 100 °C
10
1
0.1
TJ = 25 °C
0.01
20
40
60
80
100
10
1
0.1
0.01
0.1
1
10
Percent of Rated Peak Reverse Voltage (%)
t - Pulse Duration (s)
Figure 4. Typical Reverse Characteristics Per Diode
Figure 6. Typical Transient Thermal Impedance Per Diode
Document Number: 88673
Revision: 08-Nov-07
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
3
MBR(F,B)20H90CT & MBR(F,B)20H100CT
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
TO-220AB
ITO-220AB
0.370 (9.40)
0.360 (9.14)
0.185 (4.70)
0.175 (4.44)
0.154 (3.91)
0.148 (3.74)
PIN
2
3
0.160 (4.06)
0.140 (3.56)
0.350 (8.89)
0.330 (8.38)
1.148 (29.16)
1.118 (28.40)
0.105 (2.67)
0.095 (2.41)
0.104 (2.65)
0.096 (2.45)
2
0.135 (3.43) DIA.
0.122 (3.08) DIA.
7° REF.
0.350 (8.89)
0.330 (8.38)
3
7° REF.
0.191 (4.85)
0.171 (4.35)
0.560 (14.22)
0.530 (13.46)
0.560 (14.22)
0.530 (13.46)
0.035 (0.89)
0.025 (0.64)
0.025 (0.64)
0.015 (0.38)
0.105 (2.67)
0.095 (2.41)
0.022 (0.56)
0.014 (0.36)
0.110 (2.79)
0.100 (2.54)
0.057 (1.45)
0.045 (1.14)
0.057 (1.45)
0.045 (1.14)
0.035 (0.90)
0.028 (0.70)
0.205 (5.20)
0.195 (4.95)
0.671 (17.04)
0.651 (16.54)
PIN
1
0.110 (2.79)
0.100 (2.54)
0.057 (1.45)
0.045 (1.14)
0.140 (3.56) DIA.
0.125 (3.17) DIA.
0.600 (15.24)
0.580 (14.73)
0.603 (15.32)
0.573 (14.55)
7° REF.
0.076 (1.93) REF.
45° REF.
0.145 (3.68)
0.135 (3.43)
0.635 (16.13)
0.625 (15.87)
0.110 (2.79)
0.100 (2.54)
0.076 (1.93) REF.
0.055 (1.39)
0.045 (1.14)
0.113 (2.87)
0.103 (2.62)
1
0.190 (4.83)
0.170 (4.32)
0.404 (10.26)
0.384 (9.75)
0.415 (10.54) MAX.
0.028 (0.71)
0.020 (0.51)
0.205 (5.21)
0.195 (4.95)
TO-263AB
0.411 (10.45)
0.380 (9.65)
0.190 (4.83)
0.160 (4.06)
0.245 (6.22)
MIN.
0.055 (1.40)
0.045 (1.14)
Mounting Pad Layout
0.42 (10.66) MIN.
K
0.360 (9.14)
0.320 (8.13)
1
K
2
0.624 (15.85)
0.591 (15.00)
0 to 0.01 (0 to 0.254)
0.110 (2.79)
0.090 (2.29)
0.021 (0.53)
0.014 (0.36)
0.037 (0.940)
0.027 (0.686)
0.105 (2.67)
0.095 (2.41)
www.vishay.com
4
0.055 (1.40)
0.047 (1.19)
0.205 (5.20)
0.195 (4.95)
0.140 (3.56)
0.110 (2.79)
0.33 (8.38) MIN.
0.670 (17.02)
0.591 (15.00)
0.15 (3.81) MIN.
0.08 (2.032) MIN.
0.105 (2.67)
0.095 (2.41)
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
Document Number: 88673
Revision: 08-Nov-07
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages