VS-MBRS360TRPbF Vishay High Power Products Schottky Rectifier, 3.0 A FEATURES • Small foot print, surface mountable • Very low forward voltage drop • High frequency operation Cathode • Guard ring for enhanced ruggedness and long term reliability Anode • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C SMC • Compliant to RoHS directive 2002/95/EC • Designed and qualified for industrial level DESCRIPTION PRODUCT SUMMARY IF(AV) The VS-MBRS360TRPbF surface mount Schottky rectifier has been designed for applications requiring low forward drop and small foot prints on PC boards. Typical applications are in disk drives, switching power supplies, converters, freewheeling diodes, battery charging, and reverse battery protection. 3.0 A VR 60 V IRM 30 mA at 125 °C MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) CHARACTERISTICS VALUES UNITS 3.0 A 60 V 790 A Rectangular waveform VRRM IFSM tp = 5 μs sine VF 3.0 Apk, TJ = 125 °C TJ Range 0.61 V - 55 to 150 °C VOLTAGE RATINGS PARAMETER SYMBOL Maximum DC reverse voltage VS-MBRS360TRPbF UNITS 60 V VR Maximum working peak reverse voltage VRWM ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current SYMBOL IF(AV) TEST CONDITIONS VALUES 50 % duty cycle at TL = 118 °C, rectangular waveform 3.0 50 % duty cycle at TL = 105 °C, rectangular waveform 4.0 5 μs sine or 3 μs rect. pulse Following any rated load condition and with rated VRRM applied 790 UNITS A Maximum peak one cycle non-repetitive surge current IFSM Non-repetitive avalanche energy EAS TJ = 25 °C, IAS = 1.0 A, L = 10 mH 5.0 mJ Repetitive avalanche current IAR Current decaying linearly to zero in 1 μs Frequency limited by TJ maximum VA = 1.5 x VR typical 1.0 A Document Number: 94322 Revision: 05-Mar-10 10 ms sine or 6 ms rect. pulse For technical questions, contact: [email protected] 80 www.vishay.com 1 VS-MBRS360TRPbF Vishay High Power Products Schottky Rectifier, 3.0 A ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS 3A VFM (1) Maximum forward voltage drop TJ = 25 °C 6A 3A TJ = 125 °C 6A TJ = 25 °C Maximum reverse leakage current Typical series inductance Maximum voltage rate of change TJ = 100 °C VR = Rated VR MAX. 0.57 0.74 0.72 0.9 0.51 0.61 0.62 0.77 - 0.5 UNITS V mA - 20 TJ = 125 °C - 30 CT VR = 5 VDC (test signal range 100 kHz to 1 MHz), 25 °C - 180 LS Measured lead to lead 5 mm from package body - 3.0 nH Rated VR - 10 000 V/μs IRM Maximum junction capacitance (1) TYP. dV/dt pF Note (1) Pulse width < 300 μs, duty cycle < 2 % THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range TJ (1), TStg Maximum thermal resistance, junction to lead RthJL (2) Maximum thermal resistance, junction to ambient RthJA TEST CONDITIONS UNITS - 55 to 150 °C 12 DC operation °C/W 46 0.24 Approximate weight Marking device VALUES g 0.008 Case style SMC (similar to DO-214AB) oz. V36 Notes (1) (2) dP tot 1 ------------- < -------------- thermal runaway condition for a diode on its own heatsink dT J R thJA Mounted 1" square PCB www.vishay.com 2 For technical questions, contact: [email protected] Document Number: 94322 Revision: 05-Mar-10 VS-MBRS360TRPbF Schottky Rectifier, 3.0 A Vishay High Power Products 100 IR - Reverse Current (mA) IF - Instantaneous Forward Current (A) 10 TJ = 150 °C TJ = 100 °C TJ = 25 °C 1.0 TJ = 150 °C 10 TJ = 125 °C 1.0 TJ = 100 °C TJ = 75 °C 0.1 TJ = 50 °C 0.01 TJ = 25 °C 0.001 0.1 0.2 0.4 0.6 0.8 1.0 1.2 0 5 10 15 20 25 30 35 40 VFM - Forward Voltage Drop (V) VR - Reverse Voltage (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics (Per Leg) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage (Per Leg) CT - Junction Capacitance (pF) 1000 TJ = 25 °C 100 10 0 10 20 30 40 50 60 70 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (°C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg) 100 10 PDM t1 1.0 Single pulse (thermal resistance) 0.1 0.00001 0.0001 0.001 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 0.01 t2 Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC 0.1 1.0 10 100 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) Document Number: 94322 Revision: 05-Mar-10 For technical questions, contact: [email protected] www.vishay.com 3 VS-MBRS360TRPbF 160 150 3.0 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 DC 140 130 RMS limit Average Power Loss (W) Allowable Case Temperature (°C) Vishay High Power Products Schottky Rectifier, 3.0 A 120 110 100 Square wave (D = 0.50) Rated VR applied 90 80 70 2.5 2.0 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 DC DC 1.5 1.0 0.5 See note (1) 60 0 0 1 2 3 4 5 0 1 2 3 4 5 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Average Forward Current vs. Allowable Lead Temperature Fig. 6 - Maximum Average Forward Dissipation vs. Average Forward Current IFSM - Non-Repetitive Surge Current (A) IF(AV) - Average Forward Current (A) 1000 100 At any rated load condition and with rated VRRM applied following surge 10 10 100 1000 10 000 tp - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Peak Surge Forward Current vs. Pulse Duration Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR (1) www.vishay.com 4 For technical questions, contact: [email protected] Document Number: 94322 Revision: 05-Mar-10 VS-MBRS360TRPbF Schottky Rectifier, 3.0 A Vishay High Power Products ORDERING INFORMATION TABLE Device code VS- MBR 1 2 S 3 60 TR PbF 3 4 5 6 7 1 - HPP product suffix 2 - Schottky MBR series 3 - S = SMC 4 - Current rating (3 = 3 A) 5 - Voltage rating (60 = 60 V) 6 - TR = Tape and reel (3000 pieces) 7 - PbF = Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95023 Part marking information www.vishay.com/doc?95029 Packaging information www.vishay.com/doc?95034 Document Number: 94322 Revision: 05-Mar-10 For technical questions, contact: [email protected] www.vishay.com 5 Outline Dimensions Vishay High Power Products SMC DIMENSIONS in millimeters (inches) 2.75 (0.108) 3.15 (0.124) 1 5.59 (0.220) 6.22 (0.245) 1 2 2 Polarity Part number 6.60 (0.260) 7.11 (0.280) 4.69 MAX. (0.185 MAX.) 0.152 (0.006) 0.305 (0.012) 3.20 MIN. (0.126 MIN.) 2.00 (0.079) 2.62 (0.103) 0.76 (0.030) 1.52 (0.060) Document Number: 95023 Revision: 05-Nov-08 0.102 (0.004) 0.203 (0.008) 7.75 (0.305) 8.13 (0.320) 1.52 MIN. (0.060 MIN.) 0.320 REF. Soldering pad For technical questions concerning discrete products, contact: [email protected] For technical questions concerning module products, contact: [email protected] www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1