REVISIONS PART NO. MC6FD010-30P1 ECN # REV DESCRIPTION DRAWN DATE CHECKD DATE APPRVD DATE - 1.0 RELEASED DO 19/04/12 ER 19/04/12 ER 19/04/12 Specification Current Rating : 1Amp Dielectric withstanding Voltage : 500V AC Min. for one Min. Dimensions : Millimetres (Inches) Part Number Table Description Dual Row IDC Socket, With Strain Relief Insulation Resistance : 1,000MΩ Min. at 5,00V DC Working Temperature : -25°C to +85°C Contact Resistance : 30mΩ Max. Mated Insulator Material : Glass Filled PBT Resin, Black Contact Material : Brass Durability : 100 Cycles Wire Size : AWG 28 Stranded .050″ (1.27MM) Center Ribbon Cable A ± 0.13 (.005) B ± 0.25 (.010) Part Number 10.16(.400) 17.35(.683) MC6FD010-30P1 15.24(.600) 22.43(.883) MC6FD014-30P1 Mating Force : 5.75oz (163g.f.) per Contact Max. 17.78(.700) 24.97(.983) MC6FD016-30P1 Unmating Force : 0.70oz (20g.f.) per Contact Min. 22.86(.900) 30.05(1.183) MC6FD020-30P1 Mating Pin Length 30.48(1.200) 37.67(1.483) MC6FD026-30P1 : 200″ (5.08MM) to .250″(6.35MM) of .025″ (6.35MM) SQ. or Round Pin 40.60(1.600) 47.83(1.883) MC6FD034-30P1 48.26(1.900) 55.45(2.183) MC6FD040-30P1 60.96(2.400) 68.15(2.683) MC6FD050-30P1 Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not o perate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012. TOLERANCES: DRAWN BY: DO UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. CHECKED BY: ER APPROVED BY: ER DATE: 19/04/12 www.element14.com www.farnell.com www.newark.com DRAWING TITLE: Dual Row IDC Socket, With Strain Relief DATE: SIZE 19/04/12 A4 DATE: 19/04/12 DWG NO. ELECTRONIC FILE MC6FD010-30P1-01 SCALE: NTS REV MC6FD010-30P1-1 U.O.M.: mm (inch) SHEET: 1 of 1 1.0