MDRC Vishay Dale Resistor/Capacitor Networks, Dual-In-Line, Molded DIP, 16 Pin FEATURES • • • • • 0.190" [4.83 mm] maximum seated height Rugged molded case construction Thick film resistive elements Reduces total assembly cost Low temperature coefficient (- 30 °C to + 85 °C) ± 100 ppm/°C • Compatible with automatic insertion equipment • Reduces PC board space • Lead (Pb)-free version is RoHS compliant Available e1 RoHS* COMPLIANT STANDARD ELECTRICAL SPECIFICATIONS POWER RATING P25 °C W GLOBAL SCHEMATIC MODEL RESISTOR CHARACTERISTICS CAPACITOR CHARACTERISTICS TEMPERATURE PACKAGE TCR RESISTANCE COEFFICIENT POWER TRACKING TOLERANCE (- 20 °C to + 85 °C) RATING ± ppm/°C ±% Typical W at + 25 °C CAPACITOR TOLERANCE CAPACITANCE VOLTAGE RATING V max. MDRC 1641 0.15 max 2.0 max. ± 2, or 2 Ω* ± 100 ppm/°C 50 0.1 µF + 40 %, - 20 % 25 MDRC 1642 0.15 max 2.0 max. ± 2, or 2 Ω* ± 100 ppm/°C 50 0.1 µF + 40 %, - 20 % 25 MDRC 1643 0.20 max 2.0 max. ± 2, or 2 Ω* ± 100 ppm/°C 50 0.1 µF + 40 %, - 20 % 25 * Whichever is greater GLOBAL PART NUMBER INFORMATION New Global Part Numbering: MDRC1641500GD04 (preferred part numbering format) M GLOBAL MODEL MDRC D R PIN COUNT 16 = 16 Pin C 1 6 4 1 5 0 0 G RESISTANCE TOLERANCE VALUE CODE 41 = ECL Terminator 2 digit G=±2% 42 = ECL Pull-Down significant figure, S = Special 00 = Special followed by a multiplier 680 = 68 Ω 511 = 510 Ω Historical Part Number example: MDRC1641500G (will continue to be accepted) D 0 SCHEMATIC 4 PACKAGING SPECIAL E04 = Lead (Pb)-free, Tube D04 = Tin/lead, Tube Blank = Standard (Dash Number) (up to 3 digits) MDRC 16 41 500 G D04 HISTORICAL MODEL PIN COUNT SCHEMATIC RESISTANCE VALUE TOLERANCE CODE PACKAGING New Global Part Numbering: MDRC1643750GD04 (preferred part numbering format) M GLOBAL MODEL MDRC D PIN COUNT 16 = 16 Pin R C 1 SCHEMATIC 43 = Thevenin Terminator 6 4 3 7 5 IMPEDENCE VALUE 2 digit significant figure, followed by a multiplier 500 = 50 Ω 0 G TOLERANCE CODE G=±2% J=±5% D 0 4 PACKAGING SPECIAL E04 = Lead (Pb)-free, Tube D04 = Tin/lead, Tube Blank = Standard (Dash Number) (up to 3 digits) Historical Part Number example: MDRC1643750G (will continue to be accepted) MDRC 16 43 750 G D04 HISTORICAL MODEL PIN COUNT SCHEMATIC IMPEDENCE VALUE TOLERANCE CODE PACKAGING * Pb containing terminations are not RoHS compliant, exemptions may apply www.vishay.com 62 For technical questions, contact: [email protected] Document Number: 31524 Revision: 09-Jan-07 MDRC Resistor/Capacitor Networks, Dual-In-Line, Molded DIP, 16 Pin Vishay Dale DIMENSIONS in inches [millimeters] 0.310 ± 0.010 [7.87 ± 0.254] 0.850 ± 0.010 [21.59 ± 0.254] 0.150 ± 0.005 [3.81 ± 0.127] 0.030 [0.762] Typ. 0.075 ± 0.015 [1.90 ± 0.381] Pin #1 Identification 0.130 + 0.015 - 0.010 [3.30 + 0.381 - 0.254] 0.018 ± 0.003 [0.457 ± 0.076] 0.100 ± 0.010 [2.54 ± 0.254] Non-Accumulative Tol. 7 Spaces Pin #1 0.700 ± 0.010 [17.78 ± 0.254] 0.250 ± 0.005 [6.35 ± 0.127] 0.010 + 0.005 - 0.002 [0.254 + 0.127 - 0.051] 0.290 [7.37] Min. 0.320 [8.13] Nom. 0.360 [9.14] Max. 0.050 ± 0.005 [1.27 ± 0.127] RESISTANCE VALUE IN OHMS (G TOLERANCE) MDRC1643 MDRC1641 50, 68, 75, 100 MDRC1642 510 R1 R2 Zo 81 130 50 121 195 75 162 260 100 TECHNICAL SPECIFICATIONS PARAMETER UNIT MDRC VAC 50 maximum % <3 ppm/V < 50 Operating Temperature Range °C - 30 to + 85 °C Storage Temperature Range °C - 30 to + 85 °C Operating Voltage (at + 25 °C) Capacitor Dissipation Factor Voltage Coefficient of Resistance (typical) MECHANICAL SPECIFICATIONS Marking Resistance to Solvents Solderability Terminals Body Weight Document Number: 31524 Revision: 09-Jan-07 Permanency testing per MIL-STD-202, Method 215 Per MIL-STD-202, Method 208E Copper alloy, solder plated Molded epoxy 1.5 grams For technical questions, contact: [email protected] www.vishay.com 63 MDRC Resistor/Capacitor Networks, Dual-In-Line, Molded DIP, 16 Pin Vishay Dale CIRCUIT APPLICATIONS MDRC1641 Schematic - 2.0 and - 5.2 Volt ECL Terminator 16 9 1 8 The MDRC1641 circuit contains 11 resistors of nominally equal value and a 0.01 microfarad decoupling capacitor. The MDRC-1641 is designed for ECL Line Termination to a - 2.0 volt buss. The 0.01 microfarad decoupling capacitor is for bypassing transients between supply voltages. MDRC1642 Schematic 16 9 1 8 The MDRC1642 circuit contains 12 resistors of 510 ohm each and a 0.01 microfarad decoupling capacitor. The MDRC-1642 is designed for ECL Pull-down to a - 5.2 volt buss. The 0.01 microfarad decoupling capacitor is for bypassing voltage transients on the voltage buss. MDRC1641 Schematic VCC LINE 1 VEE LINE 2 LINE 3 VCC Thevenin Equivalent Terminator VEE LINE 2 The MDRC1643 contains four pair of series resistors. The circuit is compatible with ECL pin configurations. Each terminator section (series pair) contains a voltage divider between VCC (0 volt) and VEE (- 5.2 volt) providing a Thevenin equivalent voltage of - 2.0 volts. A 0.01 microfarad decoupling capacitor bypasses the VEE buss. 16 R1 1 VCC R1 R2 VEE R2 VCC VEE R1 R1 R2 R2 VEE VCC VEE C VEE Power Rating (Watts) MDRC1641 and MDRC1642 MDRC1641 MDRC1642 Package 2.00 1.00 0.15 Single Resistor - 50 - 30 + 25 + 85 + 150 Ambient Temperature °C Derating Power Rating (Watts) MDRC1643 MDRC1643 Package 2.00 1.00 0.20 - 50 - 30 Derating www.vishay.com 64 Single Resistor + 25 + 85 + 150 Ambient Temperature °C For technical questions, contact: [email protected] Document Number: 31524 Revision: 09-Jan-07 MDRC Resistor/Capacitor Networks, Dual-In-Line, Molded DIP, 16 Pin Vishay Dale PERFORMANCE MAX ΔR (Typical Test Lots) TEST CONDITIONS Thermal Shock MDRC1641 and MDRC1642, 5 cycles between - 30 °C and + 85 °C MDRC1643, 5 cycles between - 65 °C and + 125 °C ± 0.50 % ΔR Short Time Overload 2.5 x rated working voltage 5 seconds ± 0.25 % ΔR Low Temperature Operation MDRC1641 and MDRC1642, 45 minutes at full rated working voltage at - 30 °C MDRC1643, 45 minutes at full rated working voltage at - 65 °C ± 0.25 % ΔR Moisture Resistance 240 hours with humidity ranging from 80 % RH to 98 % RH ± 0.50 % ΔR Resistance to Soldering Heat Leads immersed in + 350 °C solder to within 1/16" of device body for 3 seconds ± 0.25 % ΔR Shock Total of 18 shocks at 100 G's ± 0.25 % ΔR Vibration 12 hours at maximum of 20 G's between 10 and 2000 Hz ± 0.25 % ΔR Load Life 1000 hours at + 70 °C, rated power applied 1.5 hours “ON”, 0.5 hour “OFF” for full 1000 hour period. Derated according to the curve. ± 0.50 % ΔR Terminal Strength 4.5 pound pull for 30 seconds ± 0.25 % ΔR Insulation Resistance 10 000 Megohm (minimum) - Dielectric Withstanding Voltage (200 VRMS for 1 minute) - Document Number: 31524 Revision: 09-Jan-07 For technical questions, contact: [email protected] www.vishay.com 65 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1