MA-COM MDS

Double-Balanced Mixer,
10 - 1500 MHz
Features
MD-/MDS-149
V4
FP-2 (MD-149)
Over Two-Decade Frequency Range
Conversion Loss: 6 dB Typical Midband
LO-RFIsolation: 40 dB Typical Midband
Fully Hermetic Package
Impedance: 50 Ohms Nominal
Maximum Input Power: 300 mW Max, Derated to
85°C @ 3.2 mW/°C
• IF Port Current: 50 mA Max.
• MIL-STD-883 Screening Available
•
•
•
•
•
•
Description
Transformers convert the LO and RF paths to
balanced lines connecting to a medium barrier,
Schottky diode ring quad. These transformers help
provide excellent isolation between ports.
Conversion loss is low. The direct connection of the
IF port to the diode quad allows these mixers to be
used as phase detectors and bi-phase modulators.
SF-1 (MDS-149)
Pin Configuration (MD-149)
Pin No.
Function
Pin No.
Function
1
GND
5
LO
2
GND
6
GND
3
GND
7
GND
4
IF
8
RF
Pin Configuration (MDS-149)
Pin No.
Function
Pin No.
Function
1
GND
3
LO
2
IF
4
RF
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Double-Balanced Mixer,
10 - 1500 MHz
MD-/MDS-149
V4
Electrical Specifications1: TA = -55°C to +85°C
Parameter
Test Conditions
Frequency
Units
Min
Typ
Max
Frequency Range
RF, LO Ports
IF Port
10 - 1500
DC - 1500
MHz
MHz
—
—
—
10 - 1000 MHz
1000 - 1500 MHz
dB
dB
—
—
—
—
7.5
10
LO to RF
10 - 100 MHz
100 - 1000 MHz
1000 - 1500 MHz
dB
dB
dB
35
30
20
—
—
—
—
—
—
LO to IF
10 - 100 MHz
100 - 1000 MHz
1000 - 1500 MHz
dB
dB
dB
35
20
12
—
—
—
—
—
—
RF to IF
10 - 100 MHz
100 - 1000 MHz
1000 - 1500 MHz
dB
dB
dB
30
18
8
—
—
—
—
—
—
DC Polarity
Negative
—
—
—
—
—
DC Offset
—
—
mV
—
<4
—
RF Input
1 dB Compression
1 dB Desensitization
—
—
dBm
dBm
—
—
0
-2.0
—
—
SSB Noise Figure
Within 1 dB of Conversion Loss
Max
—
—
—
—
—
Typical Two-Tone IM
Ratio
with a –10 dBm input, each input,
25 MHz and 35 MHz IF
100-500 MHz
500-1000 MHz
1000-1500 MHz
dB
dB
dB
—
—
—
48
43
35
—
—
—
Conversion Loss
Isolation
1. All specifications apply when operated at +7 dBm available LO power with 50 ohm source and load impedance.
Bottom View of SF-1
4X .016 ± .002
.506
4X .099 ± .010
6X .050 (+.020/-.000)
Typical Performance Curves
.385 Ref
.220
.381
.165
.510 Ref
.430
.367
.305
.143
.205
.080
.000
.002
.002
.000
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Double-Balanced Mixer,
10 - 1500 MHz
MD-/MDS-149
V4
Typical Performance Curves
Ordering Information
Part Number
Package
MD-149 PIN
FP-2
MDS-149 PIN
SF-1
3
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.