Coilcraft ME3220-102MLC Smt power inductor - me3220 Datasheet

Document 380-1
SMT Power Inductor – ME3220
• Miniature power inductor: 2.5 × 3.2 base × 2.0 mm tall
• Specified by NSC for their LM2830 Buck Converter
Designer’s Kit C386 contains samples of all values
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS tin-silver over tin over nickel over silver. Other
terminations available at additional cost.
Weight 56 – 65 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 2000/7″reel; 7000/13″ reel Plastic tape: 12 mm wide,
0.25 mm thick, 4 mm pocket spacing, 2.25 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf
DCR
Inductance2 max3
Part number1
(µH)
(Ohms)
ME3220-102ML_ 1.0 ±20% 0.058
ME3220-152ML_ 1.5 ±20% 0.068
ME3220-222ML_ 2.2 ±20% 0.104
ME3220-332ML_ 3.3 ±20% 0.138
ME3220-472ML_ 4.7 ±20% 0.190
ME3220-562ML_ 5.6 ±20% 0.200
ME3220-682ML_ 6.8 ±20% 0.270
ME3220-822ML_ 8.2 ±20% 0.290
ME3220-103KL_ 10 ±10%
0.434
ME3220-123KL_ 12 ±10%
0.470
ME3220-153KL_ 15 ±10%
0.520
ME3220-183KL_ 18 ±10%
0.696
ME3220-223KL_ 22 ±10%
0.787
ME3220-273KL_ 27 ±10%
1.19
ME3220-333KL_ 33 ±10%
1.27
ME3220-393KL_ 39 ±10%
1.38
ME3220-473KL_ 47 ±10%
1.80
ME3220-563KL_ 56 ±10%
2.10
ME3220-683KL_ 68 ±10%
2.30
ME3220-823KL_ 82 ±10%
3.00
ME3220-104KL_ 100 ±10%
3.50
Isat (A)5 Irms (A)6
SRF
4
typ 10% 20% 30% 20°C 40°C
(MHz) drop drop drop rise rise
170.7 2.7 3.0
3.2
2.0
2.6
138.0 2.2 2.5
2.7
1.6
2.2
92.6 1.8 2.1
2.2
1.5
2.0
75.6 1.5 1.6
1.7
1.4
1.6
58.2 1.2 1.4
1.5
1.0
1.3
52.5 1.1 1.3
1.4
1.0
1.3
46.2 1.0 1.1
1.2
0.88 1.1
45.2 0.98 1.0
1.1
0.80 1.0
39.9 0.78 1.0
1.1
0.63 0.87
37.5 0.76 0.88 0.98 0.61 0.84
32.5 0.70 0.80 0.90 0.58 0.83
31.7 0.66 0.75 0.80 0.49 0.70
29.4 0.59 0.67 0.71 0.47 0.64
26.1 0.56 0.63 0.67 0.40 0.54
23.0 0.50 0.57 0.60 0.39 0.53
22.6 0.45 0.51 0.54 0.34 0.47
20.7 0.40 0.46 0.49 0.30 0.45
20.3 0.37 0.42 0.45 0.27 0.43
16.3 0.34 0.38 0.41 0.26 0.38
13.7 0.30 0.34 0.36 0.25 0.34
13.3 0.28 0.32 0.34 0.24 0.32
1. Please specify termination and packaging codes:
ME3220-104KLC
Termination: L = RoHS tin-silver over tin over nickel
over silver.
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481
embossed plastic tape (2000 parts
per full reel).
B = Less than full reel. In tape, but not
machine ready. To have a leader and
trailer added ($25 charge), use code
letter C instead.
D = 13″ machine-ready reel. EIA-481
embossed plastic tape (7000 parts
per full reel).
2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc using
Coilcraft SMD-A fixture in Agilent/HP 4284A impedance
analyzer.
3. DCR measured on a micro-ohmmeter and Coilcraft
CCF858 test fixture.
4. SRF measured using Agilent/HP 8753D network
analyzer and Coilcraft SMD­‑D test fixture.
5. DC current at which the inductance drops the specified
amount from its value without current.
6. Current that causes the specified temperature rise from
25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 380-1
Revised 02/17/12
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 380-2
SMT Power Inductor – ME3220 Series
Typical L vs Frequency
Typical L vs Current
1000
1000
100 µH
33 µH
10 µH
10
3.3 µH
1 µH
1
0.1
0.01
100 µH
100
Inductance (µH)
Inductance (µH)
100
33 µH
10 µH
10
3.3 µH
1 µH
1
1
0.1
10
Frequency (MHz)
0.1
0.01
1
0.1
10
Current (A)
Typical Temperature Rise vs Current
0.126 ±0.012
3,2 ±0,3
10 µH
0.110
max
2,8
1.
0
µH
3.3
µH
30
33 µH
40
100 µH
Temperature rise (from 25°C)
50
0.098 ±0.008
2,5 ±0.2
20
10
0
0.079 ±0.016
2,0 ±0,4
0
0.5
1.0
1.5
2.0
2.5
Current (A rms)
0.060
1,52
0.043
1,10
Current Derating
0.120
3,05
0.098
2,5
120
110
100
90
Dimensions are in
80
0.090
2,29
inches
mm
70
60
50
40
30
20
10
0
25°C
Percent of rated current
Recommended
Land Pattern
3.0
Isat
Irms
-40
-20
0
20
40
60
80
100
120 140
Ambient temperature (°C)
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 380-2
Revised 02/17/12
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Similar pages