Order this document by MHW1134/D SEMICONDUCTOR TECHNICAL DATA The RF Line . . . designed specifically for broadband applications requiring low distortion characteristics. Specified for use as return amplifiers for mid–split and high–split 2–way cable TV systems. Features all gold metallization system. • Guaranteed Broadband Power Gain @ f = 5.0– 200 MHz 13.0 dB 18.0 dB 22.0 dB 24.0 dB 5.0 – 200 MHz CATV HIGH–SPLIT REVERSE AMPLIFIERS • Guaranteed Broadband Noise Figure @ f = 5.0– 175 MHz • Superior Gain, Return Loss and DC Current Stability with Temperature • All Gold Metallization • All Ion–Implanted Arsenic Emitter Transistor Chips with 6.0 GHz fT’s • Circuit Design Optimized for Good RF Stability Under High VSWR Load Conditions • Transformers Designed to Insure Good Low Frequency Gain Stability versus Temperature CASE 714–06, STYLE 1 ABSOLUTE MAXIMUM RATINGS Rating RF Voltage Input (Single Tone) DC Supply Voltage Symbol Value Unit Vin + 65 dBmV VCC + 28 Vdc Operating Case Temperature Range TC – 20 to +100 °C Storage Temperature Range Tstg – 40 to +100 °C ELECTRICAL CHARACTERISTICS (VCC = 24 Vdc, TC = + 30°C, 75 W system) Symbol MHW1134 MHW1184 MHW1224 MHW1244 Units Power Gain @ 10 MHz GP 13.0 ± 0.5 18.5 ± 0.5 22.0 ± 0.5 24.0 ± 0.5 dB Frequency Range (Response/Return Loss) Note 1 BW 5.0–200 MHz Cable Slope Equivalent (5.0– 200 MHz) S – 0.2 Min/+ 0.8 Max dB Gain Flatness (5.0 – 200 MHz) F ± 0.2 Max dB Input/Output Return Loss (5.0– 200 MHz) Note 1 IRL/ORL 18.0 Min dB Cross Modulation Distortion @ +50 dBmV per ch. 12–Channel FLAT (5.0 – 120 MHz) 22–Channel FLAT (5.0 – 175 MHz) (2) (3) 26–Channel FLAT (5.0 – 200 MHz) XM12 XM22 XM26 Characteristic – 70 Typ – 65 Max – 65 Typ – 68 Typ – 64 Max – 64 Typ – 67 Typ – 62 Max – 62 Typ – 66 Typ – 61 Max – 61 Typ dB dB dB NOTES: 1. Response and return loss characteristics are tested and guaranteed for the full 5.0 – 200 MHz frequency range. 2. Motorola 100% distortion and noise figure testing is performed over the 5.0 – 175 MHz frequency range. Cross modulation and composite triple beat testing are with 22–channel loading; Video carriers used are: T7 – T13 7.0 – 43.0 MHz 7–Channels 2–6 55.25 – 83.25 MHz 5–Channels A–7 121.25 – 175.25 MHz 10–Channels 3. Video carriers used for 12–Channel typical performances are T7 – 6; For 26–Channel typical performance, Channels 8, 9, 10 and 11 are added to the 22–Channel carriers listed above. REV 6 RF DEVICE DATA MOTOROLA Motorola, Inc. 1994 MHW1134 MHW1184 MHW1224 MHW1244 1 ELECTRICAL CHARACTERISTICS — continued (VCC = 24 Vdc, TC = + 30°C, 75 W system) Characteristic Symbol MHW1134 MHW1184 MHW1224 MHW1244 Units Composite Triple Beat Distortion @ +50 dBmV per ch. 22–Channel FLAT (5.0 – 175 MHz) Notes 2 and 3 26–Channel FLAT (5.0 – 200 MHz) CTB22 CTB26 – 73 Max – 71 Typ – 72 Max – 70 Typ – 69 Max – 68.5 Typ – 68 Max – 67.5 Typ dB dB TB3 TB3 – 90 Typ – 87 Typ – 88 Typ – 85 Typ – 88 Typ – 85 Typ – 87 Typ – 84 Typ dB dB Second Order Distortion @ +50 dBmV per ch. High–Split (5.0– 175 MHz) CH2, CHA @ 176.5 MHz IMD – 72 Max – 72 Max – 72 Max – 72 Max dB Noise Figure High–Split (5.0– 175 MHz) Note 2 NF 7.0 Max 5.5 Max 5.5 Max 5.0 Max dB DC Current IDC Individual Triple Beat Distortion @ +50 dBmV per ch. Mid–Split (5.0– 120 MHz) T11, T12 and CH2 @ 123.25 MHz High–Split (5.0– 175 MHz) T13, CH2 and CH5 @ 175.5 MHz 210 Typ/240 Max mAdc NOTES: 1. Response and return loss characteristics are tested and guaranteed for the full 5.0 – 200 MHz frequency range. 2. Motorola 100% distortion and noise figure testing is performed over the 5.0 – 175 MHz frequency range. Cross modulation and composite triple beat testing are with 22–channel loading; Video carriers used are: T7 – T13 7.0 – 43.0 MHz 7–Channels 2–6 55.25 – 83.25 MHz 5–Channels A–7 121.25 – 175.25 MHz 10–Channels 3. Video carriers used for 12–Channel typical performances are T7 – 6; For 26–Channel typical performance, Channels 8, 9, 10 and 11 are added to the 22–Channel carriers listed above. MHW1134 MHW1184 MHW1224 MHW1244 2 MOTOROLA RF DEVICE DATA PACKAGE DIMENSIONS Q –A– 0.25 (0.010) S –Z– NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 2 PL T F M M A M V –F– R J B 6–32UNC–2B 2 PL 0.25 (0.010) M Z T A M U 1 23 5 789 C K –E– W –T– N G P D L 7 PL 0.25 (0.010) M T A M DIM A B C D E F G J K L N P Q R S U V W INCHES MIN MAX ––– 1.775 ––– 1.085 ––– 0.840 0.018 0.022 0.465 0.510 0.300 0.325 0.100 BSC 0.156 BSC 0.315 0.355 1.00 BSC 0.165 BSC 0.100 BSC 0.148 0.168 ––– 0.595 1.500 BSC 0.200 BSC 0.280 BSC 0.435 0.450 STYLE 1: PIN 1. 2. 3. 4. 5. 6. 7. 8. 9. MILLIMETERS MIN MAX ––– 45.08 ––– 27.56 ––– 21.34 0.46 0.56 11.81 12.95 7.62 8.25 2.54 BSC 3.96 BSC 8.00 8.50 25.40 BSC 4.10 BSC 2.54 BSC 3.76 4.27 ––– 15.11 38.10 BSC 5.08 BSC 7.11 BSC 11.05 11.43 RF INPUT GROUND GROUND DELETED VDC DELETED GROUND GROUND RF OUTPUT CASE 714–06 ISSUE K Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. MOTOROLA RF DEVICE DATA MHW1134 MHW1184 MHW1224 MHW1244 3 Literature Distribution Centers: USA: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. EUROPE: Motorola Ltd.; European Literature Centre; 88 Tanners Drive, Blakelands, Milton Keynes, MK14 5BP, England. JAPAN: Nippon Motorola Ltd.; 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan. ASIA PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Center, No. 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong. ◊ MHW1134 MHW1184 MHW1224 MHW1244 4 *MHW1134/D* MHW1134/D MOTOROLA RF DEVICE DATA