C&K MIL Series 1-4 Pole Miniature Right Typical Applications • Telecom switching equipment • Military communications 5 banks per switch • Instrumentation • Totally sealed (insert molded contacts • Medical monitors Features/Benefits • Bushing option for panel mounting • 1 to 4 poles per bank and up to and terminals) • Low profile – 12 mm above PCB Specifications Materials CONTACT RATING: Switch: 20 mA, 1 VA max. resistive load Carry: 1 AMP. ELECTRICAL LIFE: 20,000 operations. OPERATING TORQUE: < 6 Ncm. STOP STRENGTH: > 50 Ncm. CONTACT RESISTANCE: < 40 mΩ INSULATION RESISTANCE: 109 Ω DIELECTRIC STRENGTH: 500 V rms OPERATING TEMPERATURE: –40ºC to + 85ºC STORAGE TEMPERATURE: –55ºC to + 85ºC HOUSING: Thermoplastic (nylon) and thermoset (diallyl phthalate) ACTUATOR: Steel MOVABLE CONTACTS: Brass, gold plated. ROTOR: Thermoset (polysulfone) O-RING: Silicone STATIONARY CONTACTS & TERMINALS: Brass, gold plated. TERMINAL SEAL: Totally sealed (insert molded). BUSHING: Brass STOP PIN: Stainless steel HARDWARE: Nut: Brass, nickel plated. Washer: Brass, nickel plated. Gasket: Neopren. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages K-23 thru K-25. For additional options not shown in catalog, consult Customer Service Center. Rotary K Designation MIL Number of Banks 1 (STD.) 1 Bank 2 2 Banks Switch Function 3 3 Banks 112S (STD.) SP, 30° Index, 12 pos. no stop 4 4 Banks 102B02 SP, 30° Index, 2 pos. 5 5 Banks Switching Mode 103B03 SP, 30° Index, 3 pos. N (STD.) Non-shorting BBM (break-before-make) 104B04 SP, 30° Index, 4 pos. C Shorting, MBB (make-before-break) 105B05 SP, 30° Index, 5 pos. 106B06 SP, 30° Index, 6 pos. Mounting Style 107B07 SP, 30° Index, 7 pos. SD (STD.) Without panel mount 108B08 SP, 30° Index, 8 pos. AD (STD.) With panel mount 109B09 SP, 30° Index, 9 pos. Actuator Option 110B10 SP, 30° Index, 10 pos. (NONE) (STD.) 4 mm diameter shaft 111B11 SP, 30° Index, 11 pos. M10X3 4 mm shaft with flat 112B12 (STD.) SP, 30° Index, 12 pos. F2X1 4 mm shaft with screwdriver slot 206S (STD.) DP, 30° Index, 6 pos. no stop Actuator Option Angle* 202B02 DP, 30° Index, 2 pos. (NONE) (STD.) 203B03 DP, 30° Index, 3 pos. K0 0° angle 204B04 DP, 30° Index, 4 pos. K30 30° angle 205B05 DP, 30° Index, 5 pos. K60 60° angle Actuator Option Length** 206B06 (STD.) DP, 30° Index, 6 pos. K90 90° angle 25 (STD.) 25 mm standard shaft 303S 3P, 30° Index, 3 pos. no stop 302B02 303B03 402S 402B02 K120 120° angle K180 180° angle K270 270° angle 3P, 30° Index, 2 pos. 3P, 30° Index, 3 pos. 4P, 30° Index, 2 pos. no stop 4P, 30° Index, 2 pos. * Other angles available by request ** Other lengths available by request. Dimensions are shown: IN (mm) Dimensions subject to change K-22 www.ittcannon.com C&K MIL Series 1-4 Pole Miniature Right DESIGNATION MIL NUMBER OF BANKS OPTION CODE DIM. ‘L’ WITH BUSHING DIM. ‘L’ 1 2 .770 (17,78) .897 (22,78) 1.400 (35,56) 1.597 (40,56) 3 4 2.100 (53,34) 2.297 (58,34) 2.800 (71,12) 3.00 (76,12) 5 3.500 (88,90) 3.697 (93,90) SWITCH FUNCTION 30º INDEXING NO. POLES A SWITCH FUNCTION 112S 12 Position No Stops 102B02 2 Positions 103B03 3 Positions 104B04 4 Positions 105B05 5 Positions NO. POLES Pos. 11 21 31 Pos. 6 Positions 107B07 7 Positions 108B08 8 Positions 109B09 9 Positions 110B10 10 Positions 111B11 11 Positions 112B12 12 Positions 13 2 3 3 3 DP DP MODELS SCHEMATIC 106B06 12 2 2 3 2 A1 4P MODELS SCHEMATIC A2 A1 A2 A3 A4 3P Pos. 11 21 31 41 51 61 12 22 32 42 52 62 Pos. 11 21 12 2 2 13 23 14 24 MODEL NO. SWITCH FUNCTION 206S 4 Position No Stops 202B02 2 Positions 203B03 3 Positions 204B04 4 Positions 205B05 5 Positions 206B06 6 Positions 303S 3 Positions No Stop 302B02 2 Positions 303B03 3 Positions 402S 2 Positions No Stop 402B02 2 Positions 4P Third Angle Projection Dimensions are shown: IN (mm) Dimensions subject to change K-23 www.ittcannon.com K Rotary SP MODEL NO. 30º INDEXING 3P MODELS SCHEMATIC A1 A2 A3 SP MODELS SCHEMATIC C&K MIL Series 1-4 Pole Miniature Right SWITCHING MODE N C (STD.) NON-SHORTING, BBM (break-before-make) SHORTING, MBB (make-before-break) MOUNTING STYLE SD AD WITHOUT WITH PANEL MOUNT PANEL MOUNTING Rotary K ACTUATOR OPTION (NONE) F2X1 (STD.) .157 DIA. (4,0) SCREWCRIVER SLOT .157 DIA. (4,0) .079 (2,0) .039 (1,0) M10X3 FLAT .157 DIA. (4,0) Third Angle Projection Dimensions are shown: IN (mm) Dimensions subject to change K-24 www.ittcannon.com C&K MIL Series 1-4 Pole Miniature Right ACTUATOR OPTION ANGLE (NONE) K0 (STD.) K30 (STD.) 0 ANGLE K60 30º K180 K120 60º K90 210º 120º K270 K0 90º 300º K (STD.) 0 ANGLE Rotary K30 K60 30º K90 60º 90º K120 120º ACTUATOR LENGTH 25 0,25 mm (.984) STANDARD SHAFT Other lengths available by request. Dimensions are shown: IN (mm) Dimensions subject to change K-25 www.ittcannon.com