MIMH SERIES – 5 x 7 Ceramic Oscillator ¾ 5 x 7 Ceramic SMD 4 Pads Oscillator ¾ Wide Frequency Range ¾ -55°C to +125°C Operation ¾ RoHS Compliant ELECTRICAL SPECIFICATIONS: Frequency Range Freq Tolerance @ +25°C Freq Stability (Inclusive of Temp., Load, Voltage, and Aging) Operating Temp Range Storage Temp. Range Supply Voltage (Vdd) Supply Current 1.500MHZ to 20.000MHZ 21.000MHZ to 50.000MHZ 51.000MHZ and above Waveform Logic “0” Logic “1” Symmetry (50% of wavefrom) Load Rise / Fall Time (20% to 80%) Start Time 1.500MHZ to 156.520MHZ ±25ppm (See Part Number Guide for Options) (See Part Number Guide for Options) -55°C to +125°C +3.3 VDC ±5% +5.0 VDC ±5% 12 mA max 20 mA max 15 mA max 35 mA max 40 mA max 60 mA max HCMOS 10% Vdd max 90% Vdd min (See Part Number Guide for Options) 5 TTL Gates or 30pF Load max 10 TTL Gates or 50pF Load max 6 nSec max 10 mSec max Vih = 70% of Vdd min to Enable Output Vil = 30% max or grounded to Disable Output (High Impedance) Tri-state Operation ENVIRONMENTAL/MECHANICAL SPECIFICATIONS: MARKING DETAILS: Line 1 = MXXXXX Shock Vibration Reflow Solder Hermeticity Solderability M = MMD COMPONENTS XXXXX = Frequency in MHZ Line 2 = SYYMML S = Internal Code YYMM = 4 Digit Date Code (Year / Month) L = Denotes RoHS Compliant Line 3 = XXXXX Internal use only May vary with lots Black dot to denote Pin 1 MIL-STD 883, Method 2002, Test Condition B MIL-STD 883, Method 2007, Test Condition B +160°C for 120 sec max +260°C for 10 sec. max MIL-STD 883, Method 1014, Test Condition C MIL-STD 883, Method 2003 (No Aging) MECHANICAL DIMENSIONS: 7.20 [.283] MAX 5.08 [.200] 1.70 [.067] MAX 2.88 [.113] 1.81 [.071] MARKING 5.20 [.205] MAX 1.30 [.051] 3 4 2 1 2.60 [.102] 1.40 [.055] Pin Connections Pin 1 Tri-state or N/C Pin 2 Case Ground Pin 3 Output Pin 4 Supply Voltage 2.00 [.079] Dimension in Brackets are in Inches External Bypass Capacitor is Recommended 2.20 [.087] Recommended Land Pattern PART NUMBERING GUIDE: MIM Frequency H 5 x 7 SMD 4 PADS Output H = HCMOS Supply Voltage 3 = +3.3 VDC 5 = +5.0 VDC Frequency Stability 025 = ±25 ppm* 050 = ±50 ppm 100 = ±100 ppm Operating Temperature Blank = 0°C to +70°C 48 = -40°C to +85°C 50 = -55°C to +105°C 55 = -55°C to +125°C Symmetry Blank = 40/60% A = 45/55% Pin 1 Connection Blank = N/C H = Tri-state Special Specs M = 100% Screening over Temperature Please Consult with MMD Sales Department for any other Parameters or Options *±25 ppm between -40°C to +85°C only MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Specifications subject to change without notice Revision MIMH013108K Packaging Blank = Bulk T = Tape and Reel