MK04 Series MEDER electronic Reed Sensors for Screw Fastening DESCRIPTION MK04 sensors are magnetically operated Reed proximity switches designed for screw mounting. The sensor should be mounted on a fixed surface with the actuating magnet on the moving surface. Introduction or removal of the magnetic field determines the closing and opening of the Reed Switch. APPLICATIONS • Position and limit switch Pneumatic or hydraulic actuator position indication and end travel limit switch • Door and window contacts Security system applications • Level sensor Use with magnetic floats for water level detection in coffee makers, washing machines or dishwashers FEATURES • • • • • • Form A, B, and C available High power switches available Other cables, connectors and colors available Various case sizes available Five operate sensitivities available A choice of cable terminations and lengths are available • High voltage versions upon request DIMENSIONS All dimensions in mm [inch] www.meder.com 218 MEDER electronic MK04 Series Reed Sensors for Screw Fastening ORDER INFORMATION Part Number Example MK04 - 1A66 C - 500 W 1A is the contact form 66 is the switch model C is the magnetic sensitivity 500 is the cable length (mm) W is the termination Series Contact form Switchmodel Magnetic Sensitivity Cable Length (mm) Termination MK4 - XX XX X- XXX X 1 Form A 66 B, C, D, E 1 Form B 1 Form C 500* W 90 Options * Other cable length available. MAGNETIC SENSITIVITY Sensitivity Class Pull In AT Range B 10 - 15 C 15 - 20 D 20 - 25 E 25 - 30 TERMINATION For wire and termination details please consult factory. Form C version requires 3 conductors. W The cable cut length includes: 5 mm of wire stripped and tinned www.meder.com 219 MEDER electronic MK04 Series Reed Sensors for Screw Fastening CONTACT DATA Switch Model → Contact Form → All Data at 20° C Contact Ratings Conditions Switch 66 Form A Min. Typ. Max. Units Switching Power Any DC combination of V & A not to exceed their individual max.‘s 10 W Switching Voltage DC or peak AC 200 V Switching Current DC or peak AC 0.5 A Carry Current DC or peak AC 1.25 A Static Contact Resistance w/ 0.5 V & 10mA 150 mΩ Dynamic Contact Resistance Measured w/ 0.5 V & 50mA , 1.5 ms after closure 200 mΩ Insulation Resistance across Contacts 100 volts applied 1010 * Ω Breakdown Voltage across Contact Voltage applied for 60 sec. min. 225 * VDC Operate Time incl. Bounce Measured w/ 100 % overdrive 0.5 ms Release Time Measured w/ no coil suppression 0.1 ms Capacitance at 10 kHz cross contact 0.2 pF Contact Operation ** Must Operate Condition Steady state field 10 60 AT Must Release Condition Steady state field 4 54 AT Environmental Data Shock Resistance 1/2 sinus wave duration 11 ms 50 g Vibration Resistance From 10 - 2000 Hz 20 g Ambient Temperature 10°C/ minute max. allowable -20 85 o C Stock Temperature 10°C/ minute max. allowable -35 85 o C Soldering Temperature 5 sec. 260 o C Please note: The indicated electrical data are maximum values and can vary downwards when using a more sensitive switch. * Insulation resistance of 1012 and breakdown voltage of 480 VDC is available. ** These ranges refer to the uncut / unmodified Reed Switches described in our Reed Switch section. Consult factory if more detail is required. www.meder.com 220 MEDER electronic MK04 Series Reed Sensors for Screw Fastening CONTACT DATA Switch Model → Contact Form → All Data at 20° C Contact Ratings Conditions Switch 90 Form B / C Min. Typ. Max. Units Switching Power Any DC combination of V & A not to exceed their individual max.‘s 20 W Switching Voltage DC or peak AC 175 V Switching Current DC or peak AC 0.5 A Carry Current DC or peak AC 1.0 A Static Contact Resistance w/ 0.5 V & 10mA 150 mΩ Dynamic Contact Resistance Measured w/ 0.5 V & 50mA , 1.5 ms after closure 250 mΩ Insulation Resistance across Contacts 100 volts applied 109 Ω Breakdown Voltage across Contact Voltage applied for 60 sec. min. 200 VDC Operate Time incl. Bounce Measured w/ 100 % overdrive 0.7 ms Release Time Measured w/ no coil suppression 1.5 ms Capacitance at 10 kHz cross contact 1.0 pF Contact Operation ** Must Operate Condition Steady state field Must Release Condition Steady state field 15 40 AT AT Environmental Data Shock Resistance 1/2 sinus wave duration 11 ms 50 g Vibration Resistance From 10 - 2000 Hz 20 g Ambient Temperature 10°C/ minute max. allowable -20 85 o C Stock Temperature 10°C/ minute max. allowable -35 85 o C Soldering Temperature 5 sec. 260 o C Please note: The indicated electrical data are maximum values and can vary downwards when using a more sensitive switch. * Insulation resistance of 1012 and breakdown voltage of 480 VDC is available. ** These ranges refer to the uncut / unmodified Reed Switches described in our Reed Switch section. Consult factory if more detail is required. www.meder.com 221