Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 9240000024 Item: MK24-E-2 Magnetic properties Conditions Min Pull-In excitation (modified contact) phys. conditioned tolerance of +/- 1 AT Test equipment Testing 100% Pull-In in milliTesla (modified conta phys. caused tolerance +/- 0,1mT Contact rating ( > 9 AT ) Switching voltage Switching current (> 9 AT ) Carry current (> 9 AT ) Contact resistance static (>9AT ) Insulation resistance Breakdown voltage ( > 9 AT ) Operate time incl. bounce (> 9 AT) Release time Capacity Special Product Data Shock Vibration Operating temperature Storage temperature Soldering Temperature Tsold Washability Min Typ Max Unit DC or Peak AC DC or Peak AC DC or Peak AC ! %& Start value " ' ( ) & &) $ *$ " RH <45 %, 100 V test voltage according to IEC 255-5 measured with no coil excitation @ 10 kHz across open switch +, Conditions Min Typ Max Unit Max Unit yes Conditions Min Typ 1/2 sine, duration 11ms, in 3 axis from 10 - 2000 Hz . . . ' Reflow according IPC/JEDEC J-STD-0 Conditions General data Unit ! "# not to exceed their individual max.'s Reach / RoHS conformity Environmental data Max KMS11+AP74 Conditions Contact data 04 Typ fully sealed Min Remark Packaging Typ / Max Unit Pick & place force should not exceed 25cN! Tape & Reel per 2000 pcs. / Tray H20 Modifications in the sense of technical progress are reserved Designed at: 04.03.10 Designed by: THAUKE Approval at: 04.03.10 Approval by: JHEYDER Last Change at: 08.04.11 Last Change by: THAUKE Approval at: 11.04.11 Approval by: JHEYDER Version: 3