Vishay MKP1840410633MG Ac and pulse metallized polypropylene film capacitors mkp radial potted type Datasheet

MKP 1840 M
Vishay Roederstein
AC and Pulse Metallized Polypropylene Film Capacitors
MKP Radial Potted Type
l
max.
FEATURES
w
max.
Marking
h
max.
5 mm to 37.5 mm lead pitch.
Supplied loose in box, taped on reel and
ammopack.
RoHS compliant
0.6
-1
± 0.4
Pitch
± 0.4
6
ENCAPSULATION
Plastic case, epoxy resin sealed, flame retardant
UL-class 94 V-0
Ø 0.8
CLIMATIC TESTING CLASS ACC. TO EN 60068-1
Dimensions in millimeters
55/100/56
LEAD DIAMETER
dt (mm)
W (mm)
PITCH
(mm)
0.5 ± 0.05
0.6 ± 0.06
0.8 ± 0.08
1.0 ± 0.1
< 16
≥ 16.5
5
7.5 to 10
15 to 37.5
15 to 37.5
CAPACITANCE RANGE
1000 pF to 6.8 µF
CAPACITANCE TOLERANCE
± 5 % , ± 2 % , ± 2.5 %
APPLICATIONS
High frequency and pulse operations. Deflection circuits in
TV-sets (S-correction), SMPS, loudspeaker crossover
networks, electronic ballast, storage, filter, timing and
sample and hold circuits.
LEADS
Tinned wire
MAXIMUM APPLICATION TEMPERATURE
100 °C
REFERENCE STANDARDS
IEC 60384-16
DETAIL SPECIFICATION
MARKING
For more detailed data and test requirements, contact:
[email protected]
C-value; tolerance; rated voltage; manufacturer’s type; code
for dielectric material; manufacturer location; manufacturer’s
logo; year and week
DIELECTRIC
Polypropylene film
ELECTRODES
Metallized
CONSTRUCTION
Mono and internal series construction
RATED DC VOLTAGES
250 V, 400 V, 630 V, 1000 V
RATED AC VOLTAGES
160 V, 220 V, 250 V, 400 V, 500 V
Document Number: 26018
Revision: 01-Jul-10
For technical questions, contact: [email protected]
www.vishay.com
147
MKP 1840 M
Vishay Roederstein AC and Pulse Metallized Polypropylene Film Capacitors
MKP Radial Potted Type
COMPOSITION OF CATALOG NUMBER
CAPACITANCE
(numerically)
MULTIPLIER
(nF)
0.1
2
Example:
1
3
410 = 100 nF
10
4
100
5
MKP 1840
X
XX
40
4
TYPE CONSTRUCTION
M
X
Mini Version
2M for 630 V/400 VAC
METALLIZED POLYPROPYLENE
PACKAGING
VOLTAGE (VDC)
25 = 250 VDC
Bulk (lt: 6.0 mm)
TOLERANCE
G
Ammopack
40 = 400 VDC
2
±2%
63 = 630 VDC
3
± 2.5 %
V
Reel (pitch: 22.5 mm to 27.5 mm)
±5%
W
Reel (pitch: 5.0 mm to 15.0 mm)
10 = 1000 V
4
Note
For detailed tape specifications refer to “Packaging Information” www.vishay.com/doc?28139 or end of catalog
SPECIFIC REFERENCE DATA
DESCRIPTION
Tangent of loss angle:
C ≤ 0.1 µF
0.1 µF < C ≤ 1.0 µF
C > 1.0 µF
Pitch (mm)
4 x 10-4
4 x 10-4
10 x 10-4
400 VDC
250 VDC
540
360
7.5
215
325
10
150
240
15
90
135
22.5
55
80
27.5
40
65
37.5
30
45
R between leads, for C ≤ 1.0 µF at 100 V, 1 min
RC between leads, for C > 1.0 µF at 100 V, 1 min
R between leads and case, 100 V, 1 min
Withstanding (DC) voltage (cut off current 10 mA) rise time 100 V/s
Withstanding (DC) voltage between leads and case
Maximum application temperature
5
www.vishay.com
148
VALUE
at 10 kHz
at 1 kHz
at 100 kHz
6 x 10-4
10 x 10-4
Maximum pulse rise time (dU/dt)R [V/µs]
630 VDC
1080
For technical questions, contact: [email protected]
510
340
185
110
85
60
40 x 10-4
1000 VDC
-
1365
680
370
285
195
> 100 000 MΩ
> 100 000 s
> 30 000 MΩ
1.6 x URdc, 1 min
500 V, 1 min
100 °C
Document Number: 26018
Revision: 01-Jul-10
MKP 1840 M
AC and Pulse Metallized Polypropylene Film Capacitors Vishay Roederstein
MKP Radial Potted Type
METALLIZED POLYPROPYLENE FILM CAPACITOR, MINI VERSION (M)
CAPACITANCE
CAPACITANCE
CODE
1000 pF
1500 pF
2200 pF
3300 pF
4700 pF
6800 pF
0.01 µF
0.015 µF
0.022 µF
0.033 µF
0.047 µF
0.068 µF
0.10 µF
0.15 µF
0.22 µF
0.33 µF
0.47 µF
0.68 µF
1.0 µF
1.5 µF
2.2 µF
3.3 µF
4.7 µF
6.8 µF
CAPACITANCE
-210
-215
-222
-233
-247
-268
-310
-315
-322
-333
-347
-368
-410
-415
-422
-433
-447
-468
-510
-515
-522
-533
-547
-568
VOLTAGE CODE 40
400 VDC/220 VAC (2)
VOLTAGE CODE 25
250 VDC/160 VAC
w
(mm)
3.0
3.0
3.5
3.5
4.0
4.0
5.0
5.5
6.5
6.5
7.5
8.5
8.5
10.5
11.0
13.5
15.0
14.5
CAPACITANCE
CODE
h
(mm)
6.5
6.5
8.5
8.5
9.0
9.0
10.5
10.5
11.5
12.5
13.5
14.5
16.5
18.5
21.0
23.5
24.5
24.5
l
(mm)
7.5
7.5
7.5
7.5
10.0
10.0
10.3
13.0
13.0
18.0
18.0
18.0
16.5
26.5
26.5
31.5
31.5
41.5
PITCH
(mm)
5.0
5.0
5.0
5.0
7.5
7.5
7.5
10.0
10.0
15.0
15.0
15.0
22.5
22.5
22.5
27.5
27.5
37.5
w
(mm)
3.0
3.5
3.0
4.0
4.5
5.0
5.7
5.5
6.0
7.5
8.5
7.5
10.5
11.0
13.5
15.0
18.0
18.0
20.0
l
(mm)
7.5
7.5
10.0
10.0
10.3
10.3
10.3
18.0
18.0
18.0
18.0
26.5
26.5
26.5
31.5
31.5
31.5
41.5
42.5
PITCH
(mm)
5.0
5.0
7.5
7.5
7.5
7.5
7.5
15.0
15.0
15.0
15.0
22.5
22.5
22.5
27.5
27.5
27.5
37.5
37.5
VOLTAGE CODE 63
630 VDC/400 VAC (2)
w
(mm)
4.5
5.5
6.5
5.5
6.5
7.5
6.5
7.5
8.5
11.0
11.0
13.5
16.5
-
h
(mm)
9.5
10.5
11.5
10.5
12.5
13.5
14.5
15.5
16.5
21.0
21.0
23.5
29.5
-
l
(mm)
13.0
13.0
13.0
18.0
18.0
18.0
26.5
26.5
26.5
26.5
31.0
31.5
31.5
-
1000 pF
-210
1500 pF
-215
2200 pF
-222
3300 pF
-233
4700 pF
-247
6800 pF
-268
0.01 µF
-310
0.015 µF
-315
0.022 µF
-322
0.033 µF
-333
0.047 µF
-347
0.068 µF
-368
0.10 µF
-410
0.15 µF
-415
0.22 µF
-422
0.33 µF
-433
0.47 µF
-447
0.68 µF
-468
1.0 µF
-510
1.5 µF
-515
Notes
(1) Ordering code -2M (e.g. MKP 1840 410 635-2M)
(2) Not suitable for mains applications
• Further C-values upon request
• Please refer to X-capacitors in our catalog “RFI Suppression Components”
Document Number: 26018
Revision: 01-Jul-10
h
(mm)
6.5
8.5
8.5
9.0
9.5
10.5
11.5
10.5
12.0
13.5
17.5
15.5
18.5
21.0
23.5
24.5
28.0
32.5
40.0
VOLTAGE CODE 63
630 VDC/250 VAC (2)
w
(mm)
3.0
3.0
3.5
3.0
3.0
3.0
4.0
4.5
4.5
5.5
6.5
6.0
6.0
8.5
8.5
9.0
10.5
11.0
13.5
16.5
18.0
20.0
20.0
-
h
(mm)
6.5
6.5
8.5
8.5
8.5
8.5
9.0
9.5
9.5
10.5
11.5
12.0
12.0
14.5
17.5
17.0
18.5
21.0
23.5
29.5
33.0
40.0
40.0
-
l
(mm)
7.5
7.5
7.5
10.0
10.0
10.0
10.0
10.3
13.0
13.0
13.0
18.0
18.0
18.0
18.0
26.5
26.5
31.0
31.5
31.5
31.5
42.5
42.5
-
PITCH
(mm)
5.0
5.0
5.0
7.5
7.5
7.5
7.5
7.5
10.0
10.0
10.0
15.0
15.0
15.0
15.0
22.5
22.5
27.5
27.5
27.5
27.5
37.5
37.5
-
VOLTAGE CODE 10
1000 VDC/500 VAC(2)
PITCH
(mm)
10.0 (1)
10.0 (1)
10.0 (1)
15.0 (1)
15.0 (1)
15.0 (1)
22.5 (1)
22.5 (1)
22.5 (1)
22.5 (1)
27.5 (1)
27.5 (1)
27.5 (1)
-
w
(mm)
4.0
4.0
5.5
6.5
5.5
6.0
7.5
8.5
7.5
9.0
10.5
11.0
13.5
16.5
18.0
18.0
For technical questions, contact: [email protected]
h
(mm)
9.0
9.0
10.5
11.5
10.5
12.0
13.5
14.5
15.5
17.0
18.5
21.0
23.5
29.5
33.0
32.5
l
(mm)
13.0
13.0
13.0
13.0
18.0
18.0
18.0
18.0
26.5
26.5
26.5
31.0
31.5
31.5
31.5
41.5
PITCH
(mm)
10.0
10.0
10.0
10.0
15.0
15.0
15.0
15.0
22.5
22.5
22.5
27.5
27.5
27.5
27.5
37.5
www.vishay.com
149
MKP 1840 M
Vishay Roederstein AC and Pulse Metallized Polypropylene Film Capacitors
MKP Radial Potted Type
RECOMMENDED PACKAGING
LETTER
CODE
TYPE OF
PACKAGING
HEIGHT (H)
(mm)
REEL
DIAMETER
(mm)
ORDERING CODE
EXAMPLES
PITCH
≤ 15
PITCH
22.5 - 27.5
PITCH
37.5
Ammo
Reel
Reel
Ammo
Bulk
18.5
18.5
18.5
18.5
-
S (1)
350
500
L (2)
-
MKP 1840-410-404-G
MKP 1840-410-404-W
MKP 1840-510-254-V
MKP 1840-510-254-G
MKP 1840-510-254-M
x
x
x
x
x
x
x
G
W
V
G
-
Notes
(1) S = box size 55 mm x 210 mm x 340 mm (w x h x l)
(2) L = box size 60 mm x 360 mm x 510 mm (w x h x l)
EXAMPLE OF ORDERING CODE
TYPE
CAPACITANCE CODE
VOLTAGE CODE
TOLERANCE CODE
MINI
PACKAGING CODE
63
4
M
G
MKP 1840
447
Tolerance codes: 4 = 5 % (J); 3 = 2.5 % (H)
METALLIZED POLYPROPYLENE FILM CAPACITOR, MKP 1840 PCM5, MINI VERSION (-5M)
CAPACITANCE
CAPACITANCE
CODE
dt = 0.5 ± 0.05
3300 pF
4700 pF
6800 pF
0.01 µF
0.015 µF
0.022 µF
0.033 µF
0.047 µF
0.068 µF
0.10 µF
-233
-247
-268
-310
-315
-322
-333
-347
-368
-410
VOLTAGE CODE 25
250 VDC/160 VAC
w
h
l
PITCH
(mm) (mm) (mm) (mm)
4.5
5.0
5.5
9.5
10.0
11.5
7.5
7.5
7.5
5
5
5
VOLTAGE CODE 40
400 VDC/220 VAC (1)
w
h
l
PITCH
(mm) (mm) (mm) (mm)
4.5
4.5
5.5
5.5
-
9.5
9.5
11.5
11.5
-
7.5
7.5
7.5
7.5
-
VOLTAGE CODE 63
630 VDC/250 VAC(1)
w
h
l
PITCH
(mm) (mm) (mm) (mm)
5.0
5.0
5.0
5.0
-
3.5
3.5
4.5
4.5
5.5
-
8.5
8.5
9.5
9.5
11.5
-
7.5
7.5
7.5
7.5
7.5
-
5.0
5.0
5.0
5.0
5.0
-
LETTER CODE
TYPE OF PACKAGING
HEIGHT (H)
(mm)
REEL DIAMETER
(mm)
ORDERING CODE EXAMPLE
PITCH 5
G
W
-
Ammo
Reel
Bulk
18.5
18.5
-
S (2)
350
-
MKP 1840-310/404-5MG
MKP 1840-310/404-5MW
MKP 1840-310/404-5M
X
X
X
Notes
(1) Not suitable for mains applications
(2) S = box size 55 mm x 210 mm x 340 mm (w x h x l)
• Further C-values upon request
EXAMPLE OF ORDERING CODE
TYPE
CAPACITANCE CODE
MKP 1840
347
Tolerance codes: 4 = 5 % (J); 3 = 2.5 % (H)
www.vishay.com
150
VOLTAGE CODE
TOLERANCE CODE
MINI
PACKAGING CODE
25
4
5M
G
For technical questions, contact: [email protected]
Document Number: 26018
Revision: 01-Jul-10
MKP 1840 M
AC and Pulse Metallized Polypropylene Film Capacitors Vishay Roederstein
MKP Radial Potted Type
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting in printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to “Packaging Information” www.vishay.com/doc?28139 or end of catalog
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensure that the stand-off pips are in good contact with the
printed-circuit board:
• For pitches ≤ 15 mm capacitors shall be mechanically fixed by the leads
• For larger pitches the capacitors shall be mounted in the same way and the body clamped
Space Requirements on Printed-Circuit Board
The maximum length and width of film capacitors is shown in the drawing:
• Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned
• Product height with seating plane as given by “IEC 60717” as reference: hmax. ≤ h + 0.4 mm or hmax. ≤ h’ + 0.4 mm
bmax. = b + 0.3 mm
Eccentricity
Imax. = I + 0.3 mm
Storage Temperature
• Storage temperature: Tstg = - 25 °C to + 40 °C with RH maximum 80 % without condensation
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient free temperature of 23 °C ± 1 °C, an atmospheric pressure
of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
Document Number: 26018
Revision: 01-Jul-10
For technical questions, contact: [email protected]
www.vishay.com
151
MKP 1840 M
Vishay Roederstein AC and Pulse Metallized Polypropylene Film Capacitors
MKP Radial Potted Type
CHARACTERISTICS
Max. RMS voltage as a function of frequency
Max. RMS voltage as a function of frequency
1000
VRMS
1000
0.0
1
100
0.2
2
1.0
2.2
6.8
10
0.0
47
0.1
0.4
7
Capacitance in µF
VRMS
Capacitance in µF
100
0.0
22
0.
0
10
6.
8
0.
1
0.
2.
2
01
0.
02
7
2
47
85 °C < Tamb < 100 °C, 250 Vdc
Tamb ≤ 85 °C, 250 Vdc
1
103
22
1.
0.
04
0.
104
105
f (Hz)
1
102
106
Max. RMS voltage as a function of frequency
103
104
105
106
f (Hz)
Max. RMS voltage as a function of frequency
1000
VRMS
1000
VRMS
Capacitance in µF
100
1.0
6.8
10
0.0
0.0 1
47
0.2
2
2.2
Capacitance in µF
100
0.
01
04
7 0
0.
22
.0
1.
0. 22
0
0. 1
47
6.
8
2.
2
0.
0.1 022
0.
0.4
7
10
Tamb ≤ 85 °C, 400 Vdc
85 °C < Tamb < 100 °C, 400 Vdc
1
1
103
104
105
f (Hz)
102
106
Max. RMS voltage as a function of frequency
103
104
105
6
f (Hz) 10
Max. RMS voltage as a function of frequency
1000
VRMS
VRMS
1000
Capacitance in µF
0.0
0.0 1
47
0.2
0.0
2
1.0
0.1 22
0.4
7
2.2
100
10
Capacitance in µF
100
10
85 °C < Tamb ≤ 100 °C, 630 Vdc/250 Vac
Tamb ≤ 85 °C, 630 Vdc/250 Vac
1
103
www.vishay.com
152
104
0.
01
04
7 0
0.
22
.0
1.
0. 22
0
1
0.
47
2.
2
0.
105
f (Hz)
106
1
102
103
For technical questions, contact: [email protected]
104
105
6
f (Hz) 10
Document Number: 26018
Revision: 01-Jul-10
MKP 1840 M
AC and Pulse Metallized Polypropylene Film Capacitors Vishay Roederstein
MKP Radial Potted Type
Max. RMS voltage as a function of frequency
Max. RMS voltage as a function of frequency
1000
1000
100
1.0
0.0
1
0.0
47
0.2
2
Capacitance in µF
VRMS
VRMS
Capacitance in µF
100
0.
0.
0.0
0.1 22
0.
0
0.4
7
10
7
22
1.
01
04
0.
0.
0.
1
02
2
47
10
Tamb ≤ 85 °C, 630 Vdc/400 Vac
Tamb ≤ 85 °C, 630 Vdc/400 Vac
1
3
10
10
4
5
10
f (Hz)
1
102
6
10
Max. RMS voltage as a function of frequency
103
104
105
6
f (Hz) 10
Max. RMS voltage as a function of frequency
1000
Capacitance in µF
Capacitance in µF
VRMS
VRMS
1000
0.0
1
100
1.0
0.0
47
0.2
2
0.
01
04
7 0
0.
.0
22
0 22
1.
0 0 .1
.4
7
100
0.1
0.
0.0
22
0.4
7
10
10
85 °C < Tamb ≤ 100 °C, 1000 Vdc
Tamb ≤ 85 °C, 1000 Vdc
1
103
104
Document Number: 26018
Revision: 01-Jul-10
105
6
f (Hz) 10
1
102
103
For technical questions, contact: [email protected]
104
105
6
f (Hz) 10
www.vishay.com
153
MKP 1840 M
Vishay Roederstein AC and Pulse Metallized Polypropylene Film Capacitors
MKP Radial Potted Type
HEAT CONDUCTIVITY (G) AS A FUNCTION OF ORIGINAL PITCH AND CAPACITOR BODY
THICKNESS IN mW/°C
Wmax.
(mm)
HEAT CONDUCTIVITY (mW/°C)
PITCH 5 mm
PITCH 7.5 mm
PITCH 10 mm
PITCH 15 mm
PITCH 22.5 mm PITCH 27.5 mm PITCH 37.5 mm
3.0
2.5
4.0
-
-
-
-
-
3.5
3.5
-
-
-
-
-
-
4.0
-
5.0
6.0
-
-
-
-
4.5
4.5
5.5
6.5
-
-
-
-
5.0
5.0
6.5
-
-
-
-
-
5.5
6.5
-
7.5
9.0
-
-
-
5.7
-
7.5
-
-
-
-
-
6.0
-
-
-
10.5
-
-
-
6.5
-
-
9.0
11.5
17.0
-
-
7.5
-
-
-
13.5
19.0
-
-
8.5
-
-
-
15.0
16.5
-
-
9.0
-
-
-
-
22.5
-
-
10.5
-
-
-
-
26.5
-
-
11.0
-
-
-
-
30.5
-
-
11.5
-
-
-
-
-
33.5
-
13.5
-
-
-
-
-
41.0
-
14.5
-
-
-
-
-
-
52.0
15.0
-
-
-
-
-
45.0
-
16.5
-
-
-
-
-
57.0
-
18.0
-
-
-
-
-
57.0
-
18.0
-
-
-
-
-
67.0
-
18.0
-
-
-
-
-
-
75.5
20.0
-
-
-
-
-
-
99.0
POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE
The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of
the free air ambient temperature.
The power dissipation can be calculated according type detail specification “HQN-384-01/101: Technical Information Film
Capacitors” with the typical tgd of the curves.
The component temperature rise (ΔT) can be measured (see section “Measuring the Component Temperature” for more details)
or calculated by ΔT = P/G:
• ΔT = Component temperature rise (°C)
• P = Power dissipation of the component (mW)
• G = Heat conductivity of the component (mW/°C)
www.vishay.com
154
For technical questions, contact: [email protected]
Document Number: 26018
Revision: 01-Jul-10
MKP 1840 M
AC and Pulse Metallized Polypropylene Film Capacitors Vishay Roederstein
MKP Radial Potted Type
MEASURING THE COMPONENT TEMPERATURE
A thermocouple must be attached to the capacitor body as in:
Thermocouple
The temperature is measured in unloaded (Tamb) and maximum loaded condition (TC).
The temperature rise is given by ΔT = Tc - Tamb.
To avoid radiation or convection, the capacitor should be tested in a wind-free box.
APPLICATION NOTE AND LIMITING CONDITIONS
These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described
hereunder. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference
suppression capacitors conforming the standards must be used.
To select the capacitor for a certain application, the following conditions must be checked:
1. The peak voltage (UP) shall not be greater than the rated DC voltage (URdc)
2. The peak-to-peak voltage (UP-P) shall not be greater than the maximum (Up-p) to avoid the ionisation inception level
3. The voltage peak slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without
ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URdc and
divided by the applied voltage.
For all other pulses following equation must be fulfilled:
T
dU
dU 2
2 ×   -------- × dt < U Rdc ×  --------
 dt  rated
 dt 
0
T is the pulse duration
4. The maximum component surface temperature rise must be lower than the limits (see graph max. allowed component
temperature rise).
5. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a capacitor
breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values
mentioned in the table: “Heat conductivity”
6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series connected with
an impedance to the mains the applicant must guarantee that the following conditions are fulfilled in any case (spikes and
surge voltages from the mains included).
Voltage Conditions for 6 Above
Tamb ≤ 85 °C
85 °C < Tamb ≤ 100 °C
URac
URac
Maximum temperature RMS-overvoltage (< 24 h)
1.25 x URac
1.25 x URac
Maximum peak voltage (VO-P) (< 2 s)
1.6 x URdc
1.1 x URdc
ALLOWED VOLTAGES
Maximum continuous RMS voltage
Document Number: 26018
Revision: 01-Jul-10
For technical questions, contact: [email protected]
www.vishay.com
155
MKP 1840 M
Vishay Roederstein AC and Pulse Metallized Polypropylene Film Capacitors
MKP Radial Potted Type
INSPECTION REQUIREMENTS
General Notes:
Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 60384-2 and
Specific Reference Data”.
Group C Inspection Requirements
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF SAMPLE
OF SUB-GROUP C1
4.1
Dimensions (detail)
As specified in chapter “General Data” of this
specification
4.3.1
Initial measurements
Capacitance
Tangent of loss angle at 10 kHz
4.3
Robustness of terminations
Tensile and bending
4.4
Resistance to soldering heat
Method: 1A
Solder bath: 280 °C ± 5 °C
Duration: 5 s
4.14
Component solvent resistance
Isopropylalcohol at room temperature
Method: 2
Immersion time: 5 min ± 0.5 min
Recovery time: Min. 1 h, max. 2 h
4.4.2
Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
|ΔC/C| ≤ 2 % of the value measured initially
Tangent of loss angle
Increase of tan δ
≤ 0.002
Compared to values measured in 4.3.1
Capacitance
Tangent of loss angle: at 100 kHz
Isopropylalcohol at room temperature
No visible damage
Method: 1
Legible marking
No visible damage
SUB-GROUP C1B PART OF SAMPLE
OF SUB-GROUP C1
4.6.1
Initial measurements
4.15
Solvent resistance of the marking
No visible damage
Rubbing material: cotton wool
4.6
Rapid change of temperature
4.7
Vibration
4.7.2
Final inspection
4.9
Shock
www.vishay.com
156
Immersion time: 5 min ± 0.5 min
θA = lower category temperature
θB = upper category temperature
5 cycles
Duration t = 30 min
Visual examination
Mounting:
See section “Mounting” of this specification
Procedure B4
Frequency range: 10 Hz to 55 Hz
Amplitude: 0.75 mm or
Acceleration 98 m/s²
(whichever is less severe)
Total duration 6 h
Visual examination
No visible damage
Legible marking
No visible damage
Mounting:
See section “Mounting” for more information
Pulse shape: Half sine
Acceleration: 490 m/s²
Duration of pulse: 11 ms
For technical questions, contact: [email protected]
Document Number: 26018
Revision: 01-Jul-10
MKP 1840 M
AC and Pulse Metallized Polypropylene Film Capacitors Vishay Roederstein
MKP Radial Potted Type
SUB-CLAUSE NUMBER AND TEST
SUB-GROUP C1B PART OF SAMPLE
OF SUB-GROUP C1
4.9.3
Final measurements
CONDITIONS
PERFORMANCE REQUIREMENTS
Visual examination
Capacitance
Tangent of loss angle
No visible damage
|ΔC/C| ≤ 2 % of the value measured in 4.6.1
Increase of tan δ ≤ 0.002
Compared to values measured in 4.6.1
As specified in section “Insulation
Resistance” of this specification
Insulation resistance
SUB-GROUP C1 COMBINED SAMPLE
OF SPECIMENS OF SUB-GROUPS
C1A AND C1B
4.10
Climatic sequence
4.10.2
Dry heat
4.10.3
Damp heat cyclic
Test Db, first cycle
Cold
4.10.4
Damp heat cyclic
Test Db, remaining cycles
4.10.6.2 Final measurements
Temperature: upper category temperature
Duration: 16 h
Temperature: lower category temperature
Duration: 2 h
4.10.6
Visual examination
Capacitance
Tangent of loss angle
Insulation resistance
No visible damage
Legible marking
|ΔC/C| ≤ 3 % of the value measured in
4.4.2 or 4.9.3
Increase of tan δ: ≤ 0.003
Compared to values measured in
4.3.1 or 4.6.1
≥ 50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C2
4.11
Damp heat steady state
Capacitance
4.11.1
Initial measurements
Tangent of loss angle at 1 kHz
4.11.3
Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
|ΔC/C| ≤ 3 % of the value measured in
4.11.1.
Tangent of loss angle
Increase of tan δ ≤ 0.002
Compared to values measured in 4.11.1
Insulation resistance
≥ 50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C3
4.12
Endurance
Duration: 2000 h
x URdc at 85 °C
0.875 x URdc at 100 °C
4.12.1
Initial measurements
Capacitance
Tangent of loss angle at 100 kHz
4.12.5
Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
|ΔC/C| ≤ 3 % compared to values measured
in 4.12.1
Tangent of loss angle
Increase of tan δ: ≤ 0.004
Compared to values measured in 4.12.1
Insulation resistance
≥ 50 % of values specified in section
“Insulation Resistance” of this specification
Document Number: 26018
Revision: 01-Jul-10
For technical questions, contact: [email protected]
www.vishay.com
157
MKP 1840 M
Vishay Roederstein AC and Pulse Metallized Polypropylene Film Capacitors
MKP Radial Potted Type
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C4
4.2.6
Temperature characteristics
Initial measurements
Capacitance
Intermediate measurements
Capacitance at lower category temperature
Capacitance at 20 °C
Capacitance at upper category temperature
For - 55 °C to + 20 °C:
0 % ≤ |ΔC/C| ≤ 2 % or
For 20 °C to 85 °C
- 3 % ≤ |ΔC/C| ≤ 0 %
As specified in section “ Capacitance” of this
specification
Final measurements
Capacitance
Insulation resistance
As specified in section “Insulation
Resistance” of this specification
SUB-GROUP C4
4.13
Charge and discharge
10 000 cycles
Charged to URdc
Discharge resistance:
UR
R = ---------------------------------------------2.5 × C × ( dU ⁄ dt )
4.13.1
Initial measurements
Capacitance
Tangent of loss angle at 100 kHz
4.13.3
Final measurements
Capacitance
|ΔC/C| ≤ 3 % compared to values measured
in 4.13.1
Tangent of loss angle
Increase of tan δ ≤ 0.005
Compared to values measured in 4.13.1
Insulation resistance
≥ 50 % of values specified in section
“Insulation Resistance” of this specification
www.vishay.com
158
For technical questions, contact: [email protected]
Document Number: 26018
Revision: 01-Jul-10
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
Similar pages