LOW-OHM CHIP RESISTORS, 0.1W TO 3W ML SERIES RoHS RESISTORSCAPACITORSCOILSDELAY LINES Term.W is RoHS compliant & 260°C compatible t T L Industry’s widest range and lowest cost! Values as low as 0.0005Ω, current ratings to 60 Amp High power to size ratio Non-inductive OPTIONS Option V: 170°C operating temperature range Option EK: Group A screening per MIL-R-10509 Option EL: Group A & B screening per MIL-R-10509 RCD Type Max. Max. Wattage * Current * (70°C) (70°C) ML0402 0.1W 3A ML0603 0.125W 3.5A ML0805 0.25W 5A ML1206 0.5W 7A ML2010 1W 14A ML2512 2W 20A MLB2512 2W/ 3W * 60A W RCD’s ML series offers cost-effective solutions for low resistance applications and are particularly ideal for various types of current sensing, voltage dividing, battery and pulse circuits, including linear and switching power supplies, power amplifiers, consumer electronics, etc. The resistance element is thick film or metal plate, and is coated with high temperature insulation for exceptional environmental protection. Resistance R an g e Typical TC (ppm/°C) Optional TC (ppm/°C) 0.02Ω TO 0.049Ω 0.050Ω TO 0.099Ω 0.100Ω TO1.0Ω 0.01Ω TO 0.049Ω 0.050Ω TO 0.099Ω 0.100Ω TO1.0Ω 0.01Ω TO 0.049Ω 0.050Ω TO 0.099Ω 0.100Ω TO1.0Ω 0.01Ω TO 0.049Ω 0.050Ω TO 0.099Ω 0.100Ω TO1.0Ω 0.01Ω TO 0.049Ω 0.050Ω TO 0.099Ω 0.100Ω TO1.0Ω 0.01Ω TO 0.049Ω 0.050Ω TO 0.099Ω 0.100Ω TO1.0Ω 0.0005Ω 0.00075Ω, 0.001Ω, 0.0015Ω, 0.002Ω 0.0025Ω TO 0.01Ω 400 300 200 400 300 200 400 300 200 400 300 200 400 300 200 400 300 200 350 200 200, 100 200, 100 100 200, 100 200, 100 100 200, 100 200, 100 100 200, 100 200, 100 100 200, 100 200, 100 100 200, 100 200, 100 100 200, 100 100, 50 150 100, 50 L W T t .040 ± .004 .020 ± .004 .014 ± .004 .010 ± .004 [1.00 ± .1] [.5 ± .1] [.35 ± .1] [.25 ± .1] .061 ± .005 .031 ± .004 .016 ±. 006 .012 ± .008 [1.55 ± .12] [.8 ± .1] [.40 ± .15] [.3 ± .2] .079 ± .008 .050 ± .008 .020 ± .006 .024 ± .008 [2.0 ± 0.2] [1.25 ± 0.2] [0.5 ± .15] [0.6 ± 0.2] .126 ± .008 .063 ± .008 .020 ± .006 .030 ± .018 [3.2 ± 0.2] [1.6 ± 0.2] [0.5 ± .15] [0.76 ± .46] .197 ± .008 .098 ± .008 .020 ± .006 .032 ± .020 [5.0 ± 0.2] [2.5 ± 0.2] [0.5 ± .15] [0.8 ± 0.5] .250 ± 0.01 .126 ± .012 .024 ± .008 .040 ± .020 [6.35 ± 0.25] [3.2 ± 0.3] [0.6 ± .2] [1 ± 0.5] .250 ± 0.01 .126 ± .012 .020~.063** .040~.106** [6.35 ± 0.25] [3.2 ± 0.3] [0.5 ~ 1.6] [1.0 ~ 2.7] * In order to operate at maximum wattage and current ratings, a suitable substrate or PCB design is required to carry the current and drain the heat. Heavy Cu, large pads and traces, and/or multilayer PC boards are recommended. MLB2512 has a 3W rating when used with 300mm2 x .0056 Cu pads ** Varies with resistance value (lower values typically have thicker bodies and wider termination pads for increased current carrying capability) TYPICAL PERFORMANCE CHARACTERISTICS Characteristics ∆R Thermal Shock (-55° to +155°C) Short Time Overload (2x [PxR]1/2, 5 sec.) Low Temp. Operation (-55°C) High Temp. Exposure (125°C, 100 hrs.) Resistance to Solder Heat Moisture Resistance Load Life(1000 hrs.) Operating Temperature Range Derating of Wattage & Current ±1% ±2% ±1% ±1% ±0.5% ±1% ±2% -55 to +155°C 1.177%/°C above 70°C Solderability Terminal Adhesion 95% Min. Coverage 15 Grams Min. P/N DESIGNATION: ML2010 - R01 - J T W RCD Type Options: V, EK, EL (leave blank if standard) Resis. Code: for 1% tol. use R as decimal point and 3 digits, e.g. R100= 0.1Ω, R200=.2Ω; for 2%-10% use R and 2 digits , e.g. R10= 0.1Ω, R20= .2Ω, etc. except if necessary, use additional (significant) digits, e.g. R005 for 0.005Ω, R0075 for 0.0075Ω in any tolerance Tolerance Code: F=1%, G=2%, J=5% Packaging: B=Bulk, T=Tape & Reel Optional TC: 50=50ppm, 101=100ppm, 201-200ppm Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable) RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:[email protected] FA009C Sale of this product is in accordance with GF-061. Specifications subject to change without notice. 24