I N D U C T O R S May 2013 Inductors for High Frequency Multilayer Ceramic MLG series MLG0603S MLG1005S MLG1608 0603 [0201 inch]* 1005 [0402 inch] 1608 [0603 inch] * Dimensions Code JIS[EIA] (1/23) I N D U C T O R S REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using these products. REMINDERS The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/Aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. 001-01 / 20130531 / e521_mlg.fm (2/23) I N D U C T O R S Product compatible with RoHS directive Halogen-free Compatible with lead-free solders Inductors for High Frequency Circuits Multilayer Ceramic Overview of the MLG Series FEATURES Advanced monolithic structure is formed using a multilayering and sintering process with ceramic and conductive materials for Highfrequency. APPLICATION Smart phones, tablet terminals, high frequency modules (PAs, VCOs, FEMs , etc.), Bluetooth, W-LAN, UWB, tuners, and other high frequency circuits for the mobile communication industry PART NUMBER CONSTRUCTION MLG Series name 0603 S L×W×H Dimensions (mm) 0603 0.6×0.3×0.3 1005 1.0×0.5×0.5 1608 1.6×0.8×0.8 Product internal code B S 0N3 Inductance (nH) 1N1 1.1 11N 11 R10 100 1R0 1000 S Inductance tolerance B ±0.1nH C ±0.2nH S ±0.3nH D ±0.5nH H ±3% J ±5% T □□□ Packaging style Internal code T Taping OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT Temperature range Package quantity Operating Storage Type temperature temperature (pieces/reel) (°C) (°C) MLG0603S –55 to +125 –55 to +125 15000 MLG1005S –55 to +125 –55 to +125 10000 MLG1608 –55 to +125 –55 to +125 4000 The Storage temperature range is for after the circuit board is mounted. Individual weight (mg) 0.2 1 4 RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://www.tdk.co.jp/rohs/ Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm. • All specifications are subject to change without notice. 001-01 / 20130531 / e521_mlg.fm (3/23) I N D U C T O R S Overview of the MLG Series RECOMMENDED REFLOW PROFILE Preheating Soldering Natural cooling Peak T: Temperature T4 T3 T2 T3 t3 T1 t1 t2 t: Time Preheating Temp. T1 T2 150°C 180°C Time t1 60 to 120s Soldering Temp. Time T3 t2 230°C 30 to 60s Peak Temp. T4 250 to 260°C Time t3 10s max. • All specifications are subject to change without notice. 001-01 / 20130531 / e521_mlg.fm (4/23) I N D U C T O R S MLGseries MLG0603S Type 0.30±0.03 SHAPE & DIMENSIONS 0.15±0.05 0.15±0.05 0.30±0.03 0.6±0.03 Dimensions in mm 0.3 RECOMMENDED LAND PATTERN 0.25 0.3 0.25 Dimensions in mm • All specifications are subject to change without notice. 001-01 / 20130531 / e521_mlg.fm (5/23) I N D U C T O R S MLGseries MLG0603S Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE L (nH) 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 Tolerance ±0.1, ±0.2nH ±0.1, ±0.2nH ±0.1, ±0.2nH ±0.1, ±0.2nH ±0.1, ±0.2nH ±0.1, ±0.2nH ±0.1, ±0.2nH ±0.1, ±0.2, 0.3nH ±0.1, ±0.2, 0.3nH ±0.1, ±0.2, 0.3nH ±0.1, ±0.2, 0.3nH ±0.1, ±0.2, 0.3nH ±0.1, ±0.2, 0.3nH ±0.1, ±0.2, 0.3nH ±0.1, ±0.2, 0.3nH ±0.1, ±0.2, 0.3nH ±0.1, ±0.2, 0.3nH ±0.1, ±0.2, 0.3nH ±0.1, ±0.2, 0.3nH ±0.1, ±0.2, 0.3nH ±0.1, ±0.2, 0.3nH ±0.1, ±0.2, 0.3nH ±3%, ±0.3nH ±3%, ±0.3nH ±3%, ±0.3nH ±3%, ±0.3nH ±3%, ±0.3nH ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% Q min. L, Q measuring frequency (MHz) — — — — — — — 4 4 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 6 6 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Self-resonant frequency (GHz) min. typ. 10.0 20 up 10.0 20 up 10.0 20 up 10.0 20 up 10.0 16.3 10.0 16.1 10.0 13.8 10.0 14.4 10.0 13.6 10.0 12.3 9.0 11.4 9.0 10.4 9.0 11.5 8.5 10.0 8.2 9.8 8.0 8.9 8.0 9.2 6.5 8.1 6.2 7.8 5.8 7.0 5.5 6.9 5.0 6.6 5.0 6.4 4.5 5.4 4.5 5.5 4.2 5.3 4.2 5.1 3.6 4.4 4.2 5.3 3.8 4.5 3.4 4.9 3.2 4.1 3.0 3.7 2.8 3.6 2.7 3.4 2.5 3.3 2.3 3.0 2.2 2.8 2.1 2.6 2.0 2.5 1.9 2.3 1.8 2.2 1.6 2.0 1.6 2.0 DC resistance ( ) max. 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.15 0.15 0.15 0.15 0.2 0.2 0.25 0.25 0.25 0.25 0.3 0.35 0.35 0.4 0.4 0.45 0.45 0.5 0.55 0.6 0.7 0.7 0.8 0.8 0.8 0.9 0.9 1.1 1.1 1.2 1.2 1.2 1.3 1.5 1.6 1.8 typ. 0.02 0.02 0.02 0.02 0.02 0.03 0.03 0.04 0.04 0.06 0.07 0.07 0.09 0.12 0.14 0.14 0.15 0.15 0.20 0.23 0.22 0.27 0.27 0.28 0.23 0.31 0.32 0.32 0.43 0.45 0.51 0.53 0.53 0.63 0.60 0.69 0.70 0.78 0.75 0.88 0.90 1.00 0.95 1.20 Rated current (mA) max. Part No. 600 600 600 600 600 600 600 600 550 550 550 550 500 500 400 400 300 300 300 300 300 300 300 300 250 250 250 250 200 200 200 200 200 180 180 180 180 150 150 150 150 100 100 100 MLG0603S0N3△T□□□ MLG0603S0N4△T□□□ MLG0603S0N5△T□□□ MLG0603S0N6△T□□□ MLG0603S0N7△T□□□ MLG0603S0N8△T□□□ MLG0603S0N9△T□□□ MLG0603S1N0△T□□□ MLG0603S1N1△T□□□ MLG0603S1N2△T□□□ MLG0603S1N3△T□□□ MLG0603S1N5△T□□□ MLG0603S1N6△T□□□ MLG0603S1N8△T□□□ MLG0603S2N0△T□□□ MLG0603S2N2△T□□□ MLG0603S2N4△T□□□ MLG0603S2N7△T□□□ MLG0603S3N0△T□□□ MLG0603S3N3△T□□□ MLG0603S3N6△T□□□ MLG0603S3N9△T□□□ MLG0603S4N3△T□□□ MLG0603S4N7△T□□□ MLG0603S5N1△T□□□ MLG0603S5N6△T□□□ MLG0603S6N2△T□□□ MLG0603S6N8△T□□□ MLG0603S7N5△T□□□ MLG0603S8N2△T□□□ MLG0603S9N1△T□□□ MLG0603S10N△T□□□ MLG0603S11N△T□□□ MLG0603S12N△T□□□ MLG0603S13N△T□□□ MLG0603S15N△T□□□ MLG0603S16N△T□□□ MLG0603S18N△T□□□ MLG0603S20N△T□□□ MLG0603S22N△T□□□ MLG0603S24N△T□□□ MLG0603S27N△T□□□ MLG0603S30N△T□□□ MLG0603S33N△T□□□ The " △ " of the Part Number contains the inductance tolerance code, B(±0.1nH), C(±0.2nH), S(±0.3nH), H(±3%) or J(±5%). Please contact us for information on inductance tolerance, G (±2%). The " □□□ " of the Part Number contains the internal code. ○ Measurement equipment Measurement item Product No. L, Q 4291B+16197A Self-resonant frequency 8720C DC resistance Type-7561 * Equivalent measurement equipment may be used. Manufacturer Agilent Technologies Agilent Technologies Yokogawa • All specifications are subject to change without notice. 001-01 / 20130531 / e521_mlg.fm (6/23) I N D U C T O R S MLGseries MLG0603S Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE L (nH) 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 160 180 Tolerance ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% ±3, ±5% Q min. L, Q measuring frequency (MHz) 6 6 6 6 5 5 5 5 5 5 5 5 5 5 5 5 5 5 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Self-resonant frequency (GHz) min. typ. 1.5 1.8 1.4 1.6 1.3 1.6 1.3 1.5 1.2 1.5 1.2 1.4 1.1 1.3 1.05 1.24 0.95 1.17 0.90 1.08 0.77 0.94 0.77 0.94 0.77 0.94 0.70 0.88 0.67 0.84 0.64 0.77 0.60 0.73 0.56 0.68 DC resistance ( ) max. 2.0 2.0 2.2 2.2 2.8 3.2 3.3 3.5 3.8 4.0 4.3 4.5 6.5 7.0 7.3 8.0 8.3 8.5 typ. 1.68 1.40 1.91 1.48 1.98 2.11 2.22 2.40 2.67 2.80 2.97 3.13 5.24 5.53 5.68 6.24 6.67 6.99 Rated current (mA) max. 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 Part No. MLG0603S36N△T□□□ MLG0603S39N△T□□□ MLG0603S43N△T□□□ MLG0603S47N△T□□□ MLG0603S51N△T□□□ MLG0603S56N△T□□□ MLG0603S62N△T□□□ MLG0603S68N△T□□□ MLG0603S75N△T□□□ MLG0603S82N△T□□□ MLG0603S91N△T□□□ MLG0603SR10△T□□□ MLG0603SR11△T□□□ MLG0603SR12△T□□□ MLG0603SR13△T□□□ MLG0603SR15△T□□□ MLG0603SR16△T□□□ MLG0603SR18△T□□□ The " △ " of the Part Number contains the inductance tolerance code, B(±0.1nH), C(±0.2nH), S(±0.3nH), H(±3%) or J(±5%). Please contact us for information on inductance tolerance, G (±2%). The " □□□ " of the Part Number contains the internal code. ○ Measurement equipment Measurement item Product No. L, Q 4291B+16197A Self-resonant frequency 8720C DC resistance Type-7561 * Equivalent measurement equipment may be used. Manufacturer Agilent Technologies Agilent Technologies Yokogawa • All specifications are subject to change without notice. 001-01 / 20130531 / e521_mlg.fm (7/23) I N D U C T O R S MLGseries MLG0603S Type ELECTRICAL CHARACTERISTICS L, Q FREQUENCY CHARACTERISTICS TABLE L(nH)typ. 500MHz 800MHz 0.3 0.3 0.4 0.4 0.5 0.5 0.6 0.6 0.7 0.6 0.7 0.7 0.8 0.8 0.9 0.9 1.0 1.0 1.1 1.1 1.2 1.2 1.4 1.4 1.5 1.5 1.7 1.7 1.9 1.9 2.1 2.0 2.2 2.2 2.5 2.5 2.8 2.8 3.1 3.1 3.4 3.4 3.7 3.7 4.1 4.1 4.4 4.4 4.8 4.8 5.3 5.3 5.9 5.9 6.4 6.5 7.1 7.1 7.8 7.8 8.6 8.6 10 10 10 11 11 12 12 13 14 15 15 16 17 18 19 20 21 23 23 24 27 29 29 32 33 36 1.8GHz 0.3 0.4 0.5 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.4 1.5 1.7 1.9 2.1 2.2 2.6 2.9 3.2 3.5 3.8 4.3 4.8 5.1 5.7 6.5 7.4 7.8 8.8 9.8 12 13 14 16 20 22 28 32 40 45 2.0GHz 0.3 0.4 0.5 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.4 1.5 1.7 1.9 2.1 2.3 2.6 2.9 3.3 3.6 3.9 4.4 4.9 5.3 5.9 6.8 7.8 8.0 9.3 10.3 12 14 15 17 23 25 35 2.4GHz 0.3 0.4 0.5 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.4 1.5 1.7 1.9 2.1 2.3 2.7 3.0 3.4 3.7 4.1 4.6 5.2 5.6 6.4 7.5 8.7 8.7 10.4 11.5 15 16 19 22 33 37 Q typ. 500MHz 14min. 14min. 14 16 16 15 15 14 14 14 14 15 14 15 14 14 14 15 15 15 14 15 14 15 14 16 15 15 14 15 14 15 15 16 14 15 14 14 13 15 13 15 13 14 800MHz 18min. 18min. 18 20 21 20 19 18 19 18 18 19 18 19 18 18 18 19 19 19 18 19 18 20 18 20 18 19 18 18 17 18 18 19 16 19 16 17 16 17 15 17 15 16 1.8GHz 29min. 29min. 29 33 33 32 30 29 29 29 29 29 29 29 28 27 27 28 29 28 26 29 27 28 25 27 25 26 25 24 22 23 22 24 19 20 16 15 14 13 13 2.0GHz 32min. 32min. 32 34 35 34 32 30 31 30 30 30 30 30 29 28 29 29 31 29 27 29 27 29 26 28 25 26 26 24 22 22 22 23 18 18 15 13 2.4GHz 35min. 35min. 35 39 39 38 35 34 34 34 33 34 33 33 32 31 32 31 33 31 29 32 29 30 27 29 26 25 26 24 22 21 20 20 15 14 11 Part No.* MLG0603S0N3△T□□□ MLG0603S0N4△T□□□ MLG0603S0N5△T□□□ MLG0603S0N6△T□□□ MLG0603S0N7△T□□□ MLG0603S0N8△T□□□ MLG0603S0N9△T□□□ MLG0603S1N0△T□□□ MLG0603S1N1△T□□□ MLG0603S1N2△T□□□ MLG0603S1N3△T□□□ MLG0603S1N5△T□□□ MLG0603S1N6△T□□□ MLG0603S1N8△T□□□ MLG0603S2N0△T□□□ MLG0603S2N2△T□□□ MLG0603S2N4△T□□□ MLG0603S2N7△T□□□ MLG0603S3N0△T□□□ MLG0603S3N3△T□□□ MLG0603S3N6△T□□□ MLG0603S3N9△T□□□ MLG0603S4N3△T□□□ MLG0603S4N7△T□□□ MLG0603S5N1△T□□□ MLG0603S5N6△T□□□ MLG0603S6N2△T□□□ MLG0603S6N8△T□□□ MLG0603S7N5△T□□□ MLG0603S8N2△T□□□ MLG0603S9N1△T□□□ MLG0603S10N△T□□□ MLG0603S11N△T□□□ MLG0603S12N△T□□□ MLG0603S13N△T□□□ MLG0603S15N△T□□□ MLG0603S16N△T□□□ MLG0603S18N△T□□□ MLG0603S20N△T□□□ MLG0603S22N△T□□□ MLG0603S24N△T□□□ MLG0603S27N△T□□□ MLG0603S30N△T□□□ MLG0603S33N△T□□□ The " △ " of the Part Number contains the inductance tolerance code, B(±0.1nH), C(±0.2nH), S(±0.3nH), H(±3%) or J(±5%). Please contact us for information on inductance tolerance, G (±2%). The " □□□ " of the Part Number contains the internal code. ○ Measurement equipment Product No. Manufacturer 4291B+16197A Agilent Technologies * Equivalent measurement equipment may be used. • All specifications are subject to change without notice. 001-01 / 20130531 / e521_mlg.fm (8/23) I N D U C T O R S MLGseries MLG0603S Type ELECTRICAL CHARACTERISTICS L, Q FREQUENCY CHARACTERISTICS TABLE L(nH)typ. 500MHz 36 40 44 49 52 59 66 74 82 96 109 129 134 156 172 223 238 318 800MHz 40 47 53 60 64 77 88 104 119 161 1.8GHz 2.0GHz 2.4GHz Q typ. 500MHz 14 13 14 13 11 12 11 13 10 12 9 11 10 9 8 7 7 6 800MHz 15 14 14 13 11 11 10 11 8 8 1.8GHz 2.0GHz 2.4GHz Part No.* MLG0603S36N△T□□□ MLG0603S39N△T□□□ MLG0603S43N△T□□□ MLG0603S47N△T□□□ MLG0603S51N△T□□□ MLG0603S56N△T□□□ MLG0603S62N△T□□□ MLG0603S68N△T□□□ MLG0603S75N△T□□□ MLG0603S82N△T□□□ MLG0603S91N△T□□□ MLG0603SR10△T□□□ MLG0603SR11△T□□□ MLG0603SR12△T□□□ MLG0603SR13△T□□□ MLG0603SR15△T□□□ MLG0603SR16△T□□□ MLG0603SR18△T□□□ The " △ " of the Part Number contains the inductance tolerance code, B(±0.1nH), C(±0.2nH), S(±0.3nH), H(±3%) or J(±5%). Please contact us for information on inductance tolerance, G (±2%). The " □□□ " of the Part Number contains the internal code. ○ Measurement equipment Product No. Manufacturer 4291B+16197A Agilent Technologies * Equivalent measurement equipment may be used. • All specifications are subject to change without notice. 001-01 / 20130531 / e521_mlg.fm (9/23) I N D U C T O R S MLGseries MLG0603S Type ELECTRICAL CHARACTERISTICS L FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE) 1000 R18 R15 R12 47N 39N 82N R10 68N 56N 33N 27N 22N 18N 15N 100 12N Inductance(nH) 10N 8N2 6N8 10 5N6 4N7 3N9 3N3 2N7 2N2 1N8 1N5 1N2 1 0 10 1N0 100 1000 10000 Frequency(MHz) ○ Measurement equipment Product No. Manufacturer E4991A +16197A Agilent Technologies * Equivalent measurement equipment may be used. • All specifications are subject to change without notice. 001-01 / 20130531 / e521_mlg.fm (10/23) I N D U C T O R S MLGseries MLG0603S Type ELECTRICAL CHARACTERISTICS Q FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE) 50 40 1N0 1N2 1N5 1N8 2N7 2N2 3N9 㻌 3N3 30 4N7 Q 5N6 6N8 20 18N 8N2 22N 27N 33N 39N 10N 12N 47N 68N 10 56N R10 82N R12 15N R15 R18 0 10 100 1000 10000 Frequency(MHz) ○ Measurement equipment Product No. Manufacturer E4991A +16197A Agilent Technologies * Equivalent measurement equipment may be used. • All specifications are subject to change without notice. 001-01 / 20130531 / e521_mlg.fm (11/23) I N D U C T O R S MLGseries MLG1005S Type 0.50±0.05 SHAPE & DIMENSIONS 0.25±0.10 0.25±0.10 0.50±0.05 1.00±0.05 Dimensions in mm 0.5 RECOMMENDED LAND PATTERN 0.5 0.4 0.5 Dimensions in mm • All specifications are subject to change without notice. 001-01 / 20130531 / e521_mlg.fm (12/23) I N D U C T O R S MLGseries MLG1005S Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE L (nH) 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 Q min. Tolerance ±0.1nH, ±0.2nH ±0.1nH, ±0.2nH ±0.1nH, ±0.2nH ±0.1nH, ±0.2nH ±0.1nH, ±0.2nH ±0.1nH, ±0.2nH ±0.1nH, ±0.2nH ±0.1nH, ±0.2, 0.3nH ±0.1nH, ±0.2, 0.3nH ±0.1nH, ±0.2, 0.3nH ±0.1nH, ±0.2, 0.3nH ±0.1nH, ±0.2, 0.3nH ±0.1nH, ±0.2, 0.3nH ±0.1nH, ±0.2, 0.3nH ±0.1nH, ±0.2, 0.3nH ±0.1nH, ±0.2, 0.3nH ±0.1nH, ±0.2, 0.3nH ±0.1nH, ±0.2, 0.3nH ±0.1nH, ±0.2, 0.3nH ±0.1nH, ±0.2, 0.3nH ±0.1nH, ±0.2, 0.3nH ±0.1nH, ±0.2, 0.3nH ±0.2nH, ±0.3nH ±0.2nH, ±0.3nH ±0.2nH, ±0.3nH ±0.2nH, ±0.3nH ±3%, ±0.3nH ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% — — — — — — — 7 7 7 7 7 7 7 7 7 7 7 7 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 L, Q measuring frequency (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Self-resonant frequency (GHz) min. typ. 10.0 20up 10.0 20up 10.0 20up 10.0 20up 10.0 18.7 10.0 16.4 10.0 17.7 10.0 13.8 10.0 19.3 10.0 11.6 8.00 11.7 8.00 9.6 7.50 9.4 8.00 10.3 7.50 9.3 7.00 8.6 7.00 8.2 6.00 7.3 5.50 6.8 5.00 6.1 5.00 6.7 5.00 6.5 4.50 6.0 4.50 5.4 4.00 5.0 4.00 5.3 4.00 4.7 3.50 4.4 3.00 4.1 3.00 4.0 3.00 3.8 2.50 3.4 2.50 3.5 2.50 3.0 2.40 2.9 2.20 2.8 2.10 2.7 2.00 2.5 1.90 2.4 1.70 2.2 1.70 2.1 1.60 2.0 1.50 1.9 DC resistance ( ) max. 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.12 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.25 0.25 0.25 0.25 0.25 0.25 0.30 0.30 0.35 0.40 0.40 0.50 0.55 0.55 0.60 0.60 0.70 0.70 0.80 0.80 typ. 0.01 0.01 0.01 0.01 0.02 0.02 0.04 0.04 0.03 0.04 0.04 0.06 0.05 0.06 0.07 0.08 0.08 0.08 0.09 0.09 0.09 0.11 0.11 0.12 0.13 0.14 0.16 0.15 0.15 0.19 0.20 0.22 0.28 0.25 0.26 0.35 0.32 0.40 0.38 0.46 0.43 0.53 0.50 Rated current (mA) max. Part No.* 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 900 900 900 800 800 800 800 700 700 700 700 600 600 600 600 500 500 500 500 400 400 400 400 400 350 350 350 350 300 300 MLG1005S0N3△T□□□ MLG1005S0N4△T□□□ MLG1005S0N5△T□□□ MLG1005S0N6△T□□□ MLG1005S0N7△T□□□ MLG1005S0N8△T□□□ MLG1005S0N9△T□□□ MLG1005S1N0△T□□□ MLG1005S1N1△T□□□ MLG1005S1N2△T□□□ MLG1005S1N3△T□□□ MLG1005S1N5△T□□□ MLG1005S1N6△T□□□ MLG1005S1N8△T□□□ MLG1005S2N0△T□□□ MLG1005S2N2△T□□□ MLG1005S2N4△T□□□ MLG1005S2N7△T□□□ MLG1005S3N0△T□□□ MLG1005S3N3△T□□□ MLG1005S3N6△T□□□ MLG1005S3N9△T□□□ MLG1005S4N3△T□□□ MLG1005S4N7△T□□□ MLG1005S5N1△T□□□ MLG1005S5N6△T□□□ MLG1005S6N2△T□□□ MLG1005S6N8△T□□□ MLG1005S7N5△T□□□ MLG1005S8N2△T□□□ MLG1005S9N1△T□□□ MLG1005S10N△T□□□ MLG1005S11N△T□□□ MLG1005S12N△T□□□ MLG1005S13N△T□□□ MLG1005S15N△T□□□ MLG1005S16N△T□□□ MLG1005S18N△T□□□ MLG1005S20N△T□□□ MLG1005S22N△T□□□ MLG1005S24N△T□□□ MLG1005S27N△T□□□ MLG1005S30N△T□□□ The " △ " of the Part Number contains the inductance tolerance code, B(±0.1nH), C(±0.2nH), S(±0.3nH), H(±3%) or J(±5%). Please contact us for information on inductance tolerance, G (±2%). * The " □□□ " of the Part Number contains the internal code. ○ Measurement equipment Measurement item Product No. L, Q 4291B +16193A Self-resonant frequency 8720C DC resistance Type-7561 * Equivalent measurement equipment may be used. Manufacturer Agilent Technologies Agilent Technologies Yokogawa • All specifications are subject to change without notice. 001-01 / 20130531 / e521_mlg.fm (13/23) I N D U C T O R S MLGseries MLG1005S Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE L (nH) 33 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 Q min. Tolerance ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% ±3%, ±5% 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 6 6 6 6 L, Q measuring frequency (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 Self-resonant frequency (GHz) min. typ. 1.40 1.8 1.30 1.7 1.20 1.6 1.20 1.6 1.10 1.4 1.10 1.5 1.00 1.3 1.00 1.3 0.80 1.1 0.75 1.1 0.70 1.0 0.70 0.9 0.70 0.9 0.70 0.9 0.60 0.8 0.60 0.8 0.55 0.7 0.50 0.6 0.50 0.6 0.42 0.5 0.45 0.5 0.40 0.5 0.40 0.5 0.35 0.4 0.35 0.4 0.30 0.4 0.30 0.4 DC resistance ( ) max. 0.90 1.00 1.00 1.10 1.20 1.20 1.30 1.40 1.50 1.50 1.60 1.80 2.00 2.20 2.20 2.50 3.50 3.80 3.80 4.20 4.20 4.80 4.80 6.50 7.00 7.50 8.00 typ. 0.59 0.62 0.65 0.67 0.75 0.72 0.83 0.85 0.87 0.93 1.01 1.14 1.37 1.48 1.48 1.68 2.44 2.74 2.88 3.15 3.02 3.42 3.54 4.82 5.21 5.39 5.97 Rated current (mA) max. 300 250 250 250 250 250 200 200 200 200 200 200 200 150 150 150 150 150 150 100 100 100 100 50 50 50 50 Part No.* MLG1005S33N△T□□□ MLG1005S36N△T□□□ MLG1005S39N△T□□□ MLG1005S43N△T□□□ MLG1005S47N△T□□□ MLG1005S51N△T□□□ MLG1005S56N△T□□□ MLG1005S62N△T□□□ MLG1005S68N△T□□□ MLG1005S75N△T□□□ MLG1005S82N△T□□□ MLG1005S91N△T□□□ MLG1005SR10△T□□□ MLG1005SR11△T□□□ MLG1005SR12△T□□□ MLG1005SR13△T□□□ MLG1005SR15△T□□□ MLG1005SR16△T□□□ MLG1005SR18△T□□□ MLG1005SR20△T□□□ MLG1005SR22△T□□□ MLG1005SR24△T□□□ MLG1005SR27△T□□□ MLG1005SR30△T□□□ MLG1005SR33△T□□□ MLG1005SR36△T□□□ MLG1005SR39△T□□□ The " △ " of the Part Number contains the inductance tolerance code, B(±0.1nH), C(±0.2nH), S(±0.3nH), H(±3%) or J(±5%). Please contact us for information on inductance tolerance, G (±2%). * The " □□□ " of the Part Number contains the internal code. ○ Measurement equipment Measurement item Product No. L, Q 4291B +16193A Self-resonant frequency 8720C DC resistance Type-7561 * Equivalent measurement equipment may be used. Manufacturer Agilent Technologies Agilent Technologies Yokogawa • All specifications are subject to change without notice. 001-01 / 20130531 / e521_mlg.fm (14/23) I N D U C T O R S MLGseries MLG1005S Type ELECTRICAL CHARACTERISTICS L, Q FREQUENCY CHARACTERISTICS TABLE L(nH)typ. 500MHz 800MHz 0.3 0.3 0.4 0.4 0.5 0.5 0.6 0.6 0.7 0.7 0.8 0.8 0.9 0.8 0.9 0.9 1.0 1.0 1.1 1.1 1.2 1.2 1.4 1.4 1.5 1.5 1.7 1.7 1.9 1.9 2.1 2.1 2.3 2.3 2.6 2.6 2.9 2.9 3.2 3.2 3.4 3.4 3.7 3.7 4.1 4.1 4.5 4.5 4.9 4.9 5.4 5.4 6.0 6.0 6.5 6.6 7.2 7.4 7.9 8.0 8.8 9.0 9.7 9.9 10.6 10.9 11.7 12.1 12.6 13.0 14.7 15.3 15.6 16.2 17.7 18.6 19.7 20.8 21.8 23.3 23.8 25.5 27.0 29.6 30.1 33.5 1.8GHz 0.3 0.4 0.5 0.6 0.7 0.8 0.8 0.9 1.0 1.1 1.2 1.4 1.5 1.7 1.9 2.1 2.3 2.6 3.0 3.3 3.6 3.9 4.3 4.8 5.4 5.8 6.8 7.4 8.6 9.3 10.8 12.4 13.8 16.2 18.3 22.0 24.1 29.0 36.8 2.0GHz 0.3 0.4 0.5 0.6 0.7 0.8 0.8 0.9 1.0 1.1 1.2 1.5 1.6 1.7 1.9 2.1 2.3 2.7 3.0 3.4 3.6 3.9 4.4 4.9 5.6 5.9 7.1 7.8 9.2 9.9 11.6 13.5 15.1 18.3 21.3 26.0 29.0 2.4GHz 0.3 0.4 0.5 0.6 0.7 0.8 0.8 0.9 1.0 1.1 1.2 1.5 1.6 1.7 1.9 2.2 2.4 2.7 3.1 3.5 3.8 4.1 4.6 5.2 6.1 6.3 7.8 8.6 10.5 11.3 13.7 16.7 19.0 Q typ. 500MHz 22min. 22min. 22min. 22 22 26 21 22 23 23 22 23 23 20 21 22 21 22 24 24 21 22 24 23 23 22 24 23 24 23 24 24 23 23 20 23 22 23 21 22 22 20 19 800MHz 27min. 27min. 27min. 27 28 34 27 29 29 29 27 29 29 26 25 27 26 27 29 30 26 28 30 30 29 28 29 28 30 28 30 30 28 29 24 28 26 28 25 27 26 23 21 1.8GHz 46min. 46min. 46min. 46 45 57 44 48 47 48 44 47 46 41 41 44 42 43 47 46 40 43 47 45 42 42 42 40 41 38 40 37 34 33 25 29 26 26 21 2.0GHz 49min. 49min. 49min. 49 49 60 47 50 50 50 47 50 49 43 43 47 44 45 49 48 42 45 49 47 43 43 43 41 41 38 39 36 33 31 22 26 22 2.4GHz 53min. 53min. 53min. 53 54 66 53 56 57 56 53 56 54 49 48 52 49 50 54 53 46 50 53 50 44 45 43 41 39 36 36 31 28 Part No.* MLG1005S0N3 △ T □□□ MLG1005S0N4 △ T □□□ MLG1005S0N5 △ T □□□ MLG1005S0N6 △ T □□□ MLG1005S0N7 △ T □□□ MLG1005S0N8 △ T □□□ MLG1005S0N9 △ T □□□ MLG1005S1N0 △ T □□□ MLG1005S1N1 △ T □□□ MLG1005S1N2 △ T □□□ MLG1005S1N3 △ T □□□ MLG1005S1N5 △ T □□□ MLG1005S1N6 △ T □□□ MLG1005S1N8 △ T □□□ MLG1005S2N0 △ T □□□ MLG1005S2N2 △ T □□□ MLG1005S2N4 △ T □□□ MLG1005S2N7 △ T □□□ MLG1005S3N0 △ T □□□ MLG1005S3N3 △ T □□□ MLG1005S3N6 △ T □□□ MLG1005S3N9 △ T □□□ MLG1005S4N3 △ T □□□ MLG1005S4N7 △ T □□□ MLG1005S5N1 △ T □□□ MLG1005S5N6 △ T □□□ MLG1005S6N2 △ T □□□ MLG1005S6N8 △ T □□□ MLG1005S7N5 △ T □□□ MLG1005S8N2 △ T □□□ MLG1005S9N1 △ T □□□ MLG1005S10N △ T □□□ MLG1005S11N △ T □□□ MLG1005S12N △ T □□□ MLG1005S13N △ T □□□ MLG1005S15N △ T □□□ MLG1005S16N △ T □□□ MLG1005S18N △ T □□□ MLG1005S20N △ T □□□ MLG1005S22N △ T □□□ MLG1005S24N △ T □□□ MLG1005S27N △ T □□□ MLG1005S30N △ T □□□ The " △ " of the Part Number contains the inductance tolerance code, B(±0.1nH), C(±0.2nH), S(±0.3nH), H(±3%) or J(±5%). Please contact us for information on inductance tolerance, G (±2%). The " □□□ " of the Part Number contains the internal code. ○ Measurement equipment Product No. Manufacturer 4291B +16193A Agilent Technologies * Equivalent measurement equipment may be used. • All specifications are subject to change without notice. 001-01 / 20130531 / e521_mlg.fm (15/23) I N D U C T O R S MLGseries MLG1005S Type ELECTRICAL CHARACTERISTICS L, Q FREQUENCY CHARACTERISTICS TABLE L(nH)typ. 500MHz 800MHz 33.5 37.8 36.7 41.5 40.3 46.9 44.3 51.6 50.2 63.2 53.7 65.6 60.9 80.2 67.5 89.8 75.8 107.5 86.5 135.2 96.9 111.0 128.9 140.8 175.2 187.8 284.7 1.8GHz 2.0GHz 2.4GHz Q typ. 500MHz 20 21 20 20 19 19 19 18 17 17 16 15 14 15 12 13 11 800MHz 23 23 21 21 20 19 18 16 15 13 1.8GHz 2.0GHz 2.4GHz Part No.* MLG1005S33N △ T □□□ MLG1005S36N △ T □□□ MLG1005S39N △ T □□□ MLG1005S43N △ T □□□ MLG1005S47N △ T □□□ MLG1005S51N △ T □□□ MLG1005S56N △ T □□□ MLG1005S62N △ T □□□ MLG1005S68N △ T □□□ MLG1005S75N △ T □□□ MLG1005S82N △ T □□□ MLG1005S91N △ T □□□ MLG1005SR10 △ T □□□ MLG1005SR11 △ T □□□ MLG1005SR12 △ T □□□ MLG1005SR13 △ T □□□ MLG1005SR15 △ T □□□ MLG1005SR16 △ T □□□ MLG1005SR18 △ T □□□ MLG1005SR20 △ T □□□ MLG1005SR22 △ T □□□ MLG1005SR24 △ T □□□ MLG1005SR27 △ T □□□ MLG1005SR30 △ T □□□ MLG1005SR33 △ T □□□ MLG1005SR36 △ T □□□ MLG1005SR39 △ T □□□ The " △ " of the Part Number contains the inductance tolerance code, B(±0.1nH), C(±0.2nH), S(±0.3nH), H(±3%) or J(±5%). Please contact us for information on inductance tolerance, G (±2%). The " □□□ " of the Part Number contains the internal code. ○ Measurement equipment Product No. Manufacturer 4291B +16193A Agilent Technologies * Equivalent measurement equipment may be used. • All specifications are subject to change without notice. 001-01 / 20130531 / e521_mlg.fm (16/23) I N D U C T O R S MLGseries MLG1005S Type ELECTRICAL CHARACTERISTICS L FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE) 1000 R18 R39 R22 R33 82N R10 47N 22N 68N 56N R27 39N 33N 27N R15 R12 18N 100 15N 12N Inductance(nH) 10N 8N2 6N8 10 5N6 4N7 3N9 3N3 2N7 2N2 1N8 1N5 1N2 1 0 10 1N0 100 1000 10000 Frequency(MHz) ○ Measurement equipment Product No. Manufacturer E4991A +16193A Agilent Technologies * Equivalent measurement equipment may be used. • All specifications are subject to change without notice. 001-01 / 20130531 / e521_mlg.fm (17/23) I N D U C T O R S MLGseries MLG1005S Type ELECTRICAL CHARACTERISTICS Q FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE) 70 1N2 1N0 1N5 60 2N2 3N3 1N8 2N7 3N9 4N7 50 5N6 40 Q 6N8 30 8N2 22N 27N 82N R10 33N R12 20 39N 10N 47N 56N R15 R18 68N 10 12N R33 R27 18N R22 R39 0 10 100 15N 1000 10000 Frequency(MHz) ○ Measurement equipment Product No. Manufacturer E4991A +16193A Agilent Technologies * Equivalent measurement equipment may be used. • All specifications are subject to change without notice. 001-01 / 20130531 / e521_mlg.fm (18/23) I N D U C T O R S MLGseries MLG1608Type 0.80±0.15 SHAPE & DIMENSIONS 0.30±0.20 0.30±0.20 0.80±0.15 1.60±0.15 Dimensions in mm 0.8 RECOMMENDED LAND PATTERN 0.6 0.8 0.6 Dimensions in mm • All specifications are subject to change without notice. 001-01 / 20130531 / e521_mlg.fm (19/23) I N D U C T O R S MLGseries MLG1608 Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE L (nH) 1 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 Tolerance ±0.3nH ±0.3nH ±0.3nH ±0.3nH ±0.3nH ±0.3nH ±0.3nH ±0.3nH ±0.3nH ±0.5nH ±0.5nH ±0.5nH ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% Q min. L, Q measuring frequency (MHz) 8 8 8 8 10 10 10 10 10 10 10 10 12 12 12 12 12 12 12 12 14 14 14 14 14 14 14 14 14 14 10 10 10 10 10 10 10 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 50 Self-resonant frequency (GHz) min. typ. 10.0 20up 10.0 20up 10.0 19.6 10.0 16.6 8.0 10.8 7.0 8.8 6.5 8.8 6.0 7.9 5.0 6.8 5.0 6.8 4.5 5.7 4.5 5.6 3.5 4.5 3.0 3.8 2.8 3.6 2.6 3.3 2.3 3.0 2.0 2.7 1.8 2.3 1.6 2.0 1.4 1.8 1.2 1.8 1.1 1.6 1.0 1.4 0.80 1.2 0.65 0.8 0.55 0.7 0.50 0.6 0.45 0.6 0.35 0.5 0.35 0.47 0.30 0.43 0.25 0.39 0.25 0.36 0.20 0.31 0.15 0.22 0.13 0.19 DC resistance ( ) max. 0.10 0.10 0.10 0.10 0.10 0.12 0.12 0.14 0.15 0.16 0.18 0.20 0.20 0.25 0.28 0.32 0.35 0.40 0.50 0.55 0.60 0.70 0.75 0.80 1.00 1.20 1.30 1.40 1.70 2.00 2.80 3.00 3.50 4.50 5.50 5.50 5.50 typ. 0.03 0.04 0.03 0.04 0.05 0.06 0.06 0.06 0.08 0.08 0.10 0.10 0.11 0.13 0.14 0.16 0.19 0.21 0.25 0.26 0.35 0.41 0.43 0.50 0.64 0.89 1.03 1.08 1.29 1.59 1.90 2.06 2.47 3.20 3.88 3.76 4.27 Rated current (mA) max. Part No. 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 500 500 500 400 400 400 300 300 300 300 250 250 200 200 100 100 100 70 70 70 70 MLG1608B1N0ST□□□ MLG1608B1N2ST□□□ MLG1608B1N5ST□□□ MLG1608B1N8ST□□□ MLG1608B2N2ST□□□ MLG1608B2N7ST□□□ MLG1608B3N3ST□□□ MLG1608B3N9ST□□□ MLG1608B4N7ST□□□ MLG1608B5N6DT□□□ MLG1608B6N8DT□□□ MLG1608B8N2DT□□□ MLG1608B10NJT□□□ MLG1608B12NJT□□□ MLG1608B15NJT□□□ MLG1608B18NJT□□□ MLG1608B22NJT□□□ MLG1608B27NJT□□□ MLG1608B33NJT□□□ MLG1608B39NJT□□□ MLG1608B47NJT□□□ MLG1608B56NJT□□□ MLG1608B68NJT□□□ MLG1608B82NJT□□□ MLG1608BR10JT□□□ MLG1608SR12JT□□□ MLG1608SR15JT□□□ MLG1608SR18JT□□□ MLG1608SR22JT□□□ MLG1608SR27JT□□□ MLG1608SR33JT□□□ MLG1608SR39JT□□□ MLG1608SR47JT□□□ MLG1608SR56JT□□□ MLG1608SR68JT□□□ MLG1608SR82JT□□□ MLG1608S1R0JT□□□ * The " □□□ " of the Part Number contains the internal code. Because it provides for a product of smaller inductance tolerance, please refer. ○ Measurement equipment Measurement item Product No. L, Q 4291B +16193A Self-resonant frequency 8720C DC resistance Type-7561 * Equivalent measurement equipment may be used. Manufacturer Agilent Technologies Panasonic Yokogawa • All specifications are subject to change without notice. 001-01 / 20130531 / e521_mlg.fm (20/23) I N D U C T O R S MLGseries MLG1608 Type ELECTRICAL CHARACTERISTICS L, Q FREQUENCY CHARACTERISTICS TABLE L(nH)typ. 500MHz 800MHz 1.0 1.0 1.2 1.1 1.5 1.5 1.8 1.8 2.2 2.1 2.6 2.6 3.2 3.2 3.8 3.8 4.6 4.6 5.4 5.5 6.6 6.7 8.0 8.1 9.8 10.0 11.8 12.1 14.8 15.4 17.8 18.5 21.9 22.9 27.1 28.8 33.4 36.0 40.2 45.0 49.1 56.0 59.6 71.1 74.0 92.8 91.1 120.6 118 188 1.8GHz 1.0 1.2 1.5 1.8 2.2 2.7 3.3 4.0 4.9 5.8 7.3 8.9 11.5 14.8 20.6 25.5 33.6 50.6 2.0GHz 1.0 1.2 1.5 1.8 2.2 2.7 3.3 4.0 5.0 5.9 7.5 9.3 12.1 16.0 23.4 29.3 40.2 2.4GHz 1.0 1.2 1.5 1.8 2.2 2.8 3.4 4.1 5.2 6.2 8.0 10 13.6 19.3 Q typ. 500MHz 39 28 37 38 44 40 38 40 41 37 38 39 38 39 38 36 36 37 37 36 38 37 34 33 35 23 800MHz 48 35 48 48 54 51 48 50 51 46 47 48 47 48 46 44 44 43 43 40 41 38 33 31 1.8GHz 77 57 78 77 88 79 76 79 76 69 67 67 63 59 49 47 43 34 2.0GHz 82 60 81 81 91 81 79 81 79 71 68 68 63 57 46 42 38 2.4GHz 95 68 93 95 107 94 91 93 88 79 74 71 61 51 Part No.* MLG1608B1N0ST□□□ MLG1608B1N2ST□□□ MLG1608B1N5ST□□□ MLG1608B1N8ST□□□ MLG1608B2N2ST□□□ MLG1608B2N7ST□□□ MLG1608B3N3ST□□□ MLG1608B3N9ST□□□ MLG1608B4N7ST□□□ MLG1608B5N6DT□□□ MLG1608B6N8DT□□□ MLG1608B8N2DT□□□ MLG1608B10NJT□□□ MLG1608B12NJT□□□ MLG1608B15NJT□□□ MLG1608B18NJT□□□ MLG1608B22NJT□□□ MLG1608B27NJT□□□ MLG1608B33NJT□□□ MLG1608B39NJT□□□ MLG1608B47NJT□□□ MLG1608B56NJT□□□ MLG1608B68NJT□□□ MLG1608B82NJT□□□ MLG1608BR10JT□□□ MLG1608SR12JT□□□ MLG1608SR15JT□□□ MLG1608SR18JT□□□ MLG1608SR22JT□□□ MLG1608SR27JT□□□ MLG1608SR33JT□□□ MLG1608SR39JT□□□ MLG1608SR47JT□□□ MLG1608SR56JT□□□ MLG1608SR68JT□□□ MLG1608SR82JT□□□ MLG1608S1R0JT□□□ The " □□□ " of the Part Number contains the internal code. Because it provides for a product of smaller inductance tolerance, please refer. ○ Measurement equipment Product No. Manufacturer 4291B +16193A Agilent Technologies * Equivalent measurement equipment may be used. • All specifications are subject to change without notice. 001-01 / 20130531 / e521_mlg.fm (21/23) I N D U C T O R S MLGseries MLG1608Type ELECTRICAL CHARACTERISTICS L FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE) 10000 R68 R56 1R0 R82 R47 R39 R33 R27 R22 R18 R15 R12 1000 R10 82N 56N 68N 47N 39N 22N 33N 27N 100 18N Inductance(nH) 15N 12N 10N 8N2 10 6N8 5N6 4N7 3N9 3N3 2N7 2N2 1N8 1N5 1N2 1N0 1 0 10 100 1000 10000 Frequency(MHz) ○ Measurement equipment Product No. Manufacturer E4991A +16193A Agilent Technologies * Equivalent measurement equipment may be used. • All specifications are subject to change without notice. 001-01 / 20130531 / e521_mlg.fm (22/23) I N D U C T O R S MLGseries MLG1608Type ELECTRICAL CHARACTERISTICS Q FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE) 100 1N5 2N7 3N3 3N9 2N2 4N7 1N8 90 5N6 6N8 80 1N2 1N0 70 8N2 Q 60 50 10N 27N 33N 40 39N 68N 56N 12N 30 R10 82N R12 20 R15 R18 R56 R47 10 R22 15N R39 R33 1R0 0 10 R68 R82 100 18N 47N R27 22N 1000 10000 Frequency(MHz) ○ Measurement equipment Product No. Manufacturer E4991A +16193A Agilent Technologies * Equivalent measurement equipment may be used. • All specifications are subject to change without notice. 001-01 / 20130531 / e521_mlg.fm (23/23) I N D U C T O R S MLGseries Packaging Style REEL DIMENSIONS ø60min. 1.0 2.0±0.5 8.4 +2.0 –0.0 ø13±0.2 14.4max. ø21±0.8 ø180±2.0 Dimensions in mm 3.5±0.05 Cavity Type MLG0603S MLG1005S MLG1608 A 0.5 max. 0.8 max. 1.1 max. B C 0.38±0.05 0.68±0.05 0.62±0.1 1.12±0.1 1.1±0.2 1.9±0.2 C 8.0±0.3 Sprocket hole 1.5 +0.1 –0.0 1.75±0.1 TAPE DIMENSIONS A B 4.0±0.1 2.0±0.05 160min. Taping 2.0±0.05 200min. 300min. Drawing direction Dimensions in mm • All specifications are subject to change without notice. 001-01 / 20130531 / e521_mlg.fm