Fairchild MM74HC08MTC Quad 2-input and gate Datasheet

Revised January 2005
MM74HC08
Quad 2-Input AND Gate
General Description
Features
The MM74HC08 AND gates utilize advanced silicon-gate
CMOS technology to achieve operating speeds similar to
LS-TTL gates with the low power consumption of standard
CMOS integrated circuits. The HC08 has buffered outputs,
providing high noise immunity and the ability to drive 10
LS-TTL loads. The 74HC logic family is functionally as well
as pin-out compatible with the standard 74LS logic family.
All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.
■ Typical propagation delay: 7 ns (tPHL), 12 ns (tPLH)
■ Fanout of 10 LS-TTL loads
■ Quiescent power consumption: 2 µA maximum at room
temperature
■ Low input current: 1 µA maximum
Ordering Code:
Order Number
Package
Package Description
Number
MM74HC08M
M14A
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
MM74HC08MX_NL
M14A
Pb-Free 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
M14D
Pb-Free 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
MM74HC08SJ
MM74HC08MTC
MTC14
14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
MM74HC08MTCX-NL
MTC14
Pb-Free 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm
Wide
MM74HC08N
N14A
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. (Tape and Reel not available in N14A)
Pb-Free package per JEDEC J-STD-020B.
Connection Diagram
Top View
© 2005 Fairchild Semiconductor Corporation
DS005297
www.fairchildsemi.com
MM74HC08 Quad 2-Input AND Gate
September 1983
MM74HC08
Absolute Maximum Ratings(Note 1)
Recommended Operating
Conditions
(Note 2)
Supply Voltage (VCC )
−0.5 to +7.0V
DC Input Voltage (VIN)
−1.5 to VCC +1.5V
DC Output Voltage (VOUT)
−0.5 to VCC +0.5V
Clamp Diode Current (IIK, IOK)
±20 mA
DC Output Current, per pin (IOUT)
±25 mA
Max
2
6
V
DC Input or Output Voltage
0
VCC
V
−40
+85
°C
Input Rise or Fall Times
±50 mA
(ICC)
(tr, tf)
−65°C to +150 °C
Power Dissipation (PD)
(Note 3)
600 mW
S.O. Package only
500 mW
VIL
VOH
ns
500
ns
VCC = 6.0V
400
ns
Note 3: Power Dissipation temperature derating — plastic “N” package: −
12 mW/°C from 65°C to 85°C.
260 °C
DC Electrical Characteristics
VIH
1000
VCC = 4.5V
Note 2: Unless otherwise specified all voltages are referenced to ground.
(Soldering 10 seconds)
Parameter
VCC = 2.0V
Note 1: Absolute Maximum Ratings are those values beyond which damage to the device may occur.
Lead Temperature (TL)
Symbol
Units
(VIN, VOUT)
Operating Temperature Range (TA)
DC VCC or GND Current, per pin
Storage Temperature Range (TSTG)
Min
Supply Voltage (VCC)
(Note 4)
Conditions
VCC
TA = 25°C
Typ
TA = −40 to 85°C TA = −40 to 125°C
Guaranteed Limits
Units
Minimum HIGH Level
2.0V
1.5
1.5
1.5
V
Input Voltage
4.5V
3.15
3.15
3.15
V
6.0V
4.2
4.2
4.2
V
Maximum LOW Level
2.0V
0.5
0.5
0.5
V
Input Voltage
4.5V
1.35
1.35
1.35
V
6.0V
1.8
1.8
1.8
V
Minimum HIGH Level
VIN = VIH
Output Voltage
|IOUT| ≤ 20 µA
2.0V
2.0
1.9
1.9
1.9
V
4.5V
4.5
4.4
4.4
4.4
V
6.0V
6.0
5.9
5.9
5.9
V
|IOUT| ≤ 4.0 mA
4.5V
4.2
3.98
3.84
3.7
V
|IOUT| ≤ 5.2 mA
6.0V
5.7
5.48
5.34
5.2
V
VIN = VIH
VOL
Maximum LOW Level
VIN = VIH or VIL
Output Voltage
|IOUT| ≤ 20 µA
2.0V
0
0.1
0.1
0.1
V
4.5V
0
0.1
0.1
0.1
V
6.0V
0
0.1
0.1
0.1
V
V
VIN = VIH or VIL
IIN
ICC
|IOUT| ≤ 4.0 mA
4.5V
0.2
0.26
0.33
0.4
|IOUT| ≤ 5.2 mA
6.0V
0.2
0.26
0.33
0.4
V
VIN = VCC or GND
6.0V
±0.1
±1.0
±1.0
µA
Maximum Quiescent
VIN = VCC or GND
6.0V
2.0
20
40
µA
Supply Current
IOUT = 0 µA
Maximum Input Current
Note 4: For a power supply of 5V ±10% the worst case output voltages (VOH, and VOL) occur for HC at 4.5V. Thus the 4.5V values should be used when
designing with this supply. Worst case VIH and VIL occur at VCC = 5.5V and 4.5V respectively. (The VIH value at 5.5V is 3.85V.) The worst case leakage current (IIN, ICC, and IOZ) occur for CMOS at the higher voltage and so the 6.0V values should be used.
www.fairchildsemi.com
2
VCC = 5V, TA = 25°C, CL = 15 pF, tr = tf = 6 ns
Symbol
tPHL
Parameter
Conditions
Maximum Propagation
Typ
Guaranteed
Limit
Units
12
20
ns
7
15
ns
Delay, Output HIGH-to-LOW
tPLH
Maximum Propagation
Delay, Output LOW-to-HIGH
AC Electrical Characteristics
VCC = 2.0V to 6.0V, CL = 50 pF, tr = tf = 6 ns (unless otherwise specified)
Symbol
tPHL
tPLH
tTLH, tTHL
Parameter
Conditions
VCC
TA = 25°C
Typ
TA = −40 to 125°C
Guaranteed Limits
Units
Maximum Propagation Delay,
2.0V
77
121
175
ns
Output HIGH-to-LOW
4.5V
15
24
35
ns
6.0V
13
20
30
ns
Maximum Propagation Delay,
2.0V
30
90
134
ns
Output LOW-to-HIGH
4.5V
10
18
27
ns
6.0V
8
15
23
ns
Maximum Output
2.0V
30
75
110
ns
Rise and Fall Time
4.5V
8
15
22
ns
6.0V
7
13
19
ns
10
10
pF
CPD
Power Dissipation Capacitance (Note 5)
CIN
Maximum Input Capacitance
(per gate)
38
4
pF
Note 5: CPD determines the no load dynamic power consumption, PD = CPD VCC2 f + ICC VCC, and the no load dynamic current consumption,
IS = CPD VCC f + ICC.
3
www.fairchildsemi.com
MM74HC08
AC Electrical Characteristics
MM74HC08
Physical Dimensions inches (millimeters) unless otherwise noted
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
Package Number M14A
www.fairchildsemi.com
4
MM74HC08
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
Pb-Free 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
Package Number M14D
5
www.fairchildsemi.com
MM74HC08
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Package Number MTC14
www.fairchildsemi.com
6
MM74HC08 Quad 2-Input AND Gate
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
Package Number N14A
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
www.fairchildsemi.com
7
www.fairchildsemi.com
Similar pages