Revised February 1999 MM74HC157 Quad 2-Input Multiplexer General Description The MM74HC157 high speed Quad 2-to-1 Line data selector/Multiplexers utilizes advanced silicon-gate CMOS technology. It possesses the high noise immunity and low power consumption of standard CMOS integrated circuits, as well as the ability to drive 10 LS-TTL loads. This device consists of four 2-input digital multiplexers with common select and STROBE inputs. When the STROBE input is at logical “0” the four outputs assume the values as selected from the inputs. When the STROBE input is at a logical “1” the outputs assume logical “0”. The 74HC logic family is functionally as well as pin-out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground. Features ■ Typical propagation delay: 14 ns data to any output ■ Wide power supply range: 2–6V ■ Low power supply quiescent current: 80 µA maximum (74HC Series) ■ Fan-out of 10 LS-TTL loads ■ Low input current: 1 µA maximum Ordering Code: Order Number MM74HC157M MM74HC157SJ MM74HC157MTC MM74HC157N Package Number Package Description M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150” Narrow M16D 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide MTC16 N16E 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Connection Diagram Function Table Inputs Pin Assignments for DIP, SOIC, SOP and TSSOP Output Strobe Select A B Y H X X X L L L L X L L L H X H L H X L L L H X H H H = HIGH Level, L = LOW Level X = Irrelevant Top View © 1999 Fairchild Semiconductor Corporation DS005314.prf www.fairchildsemi.com MM74HC157 Quad 2-Input Multiplexer September 1983 MM74HC157 Logic Diagram www.fairchildsemi.com 2 Recommended Operating Conditions −0.5 to +7.0V Supply Voltage (VCC) DC Input Voltage (VIN) −1.5 to VCC +1.5V DC Output Voltage (VOUT) −0.5 to VCC +0.5V Clamp Diode Current (IIK, IOK) ±20 mA DC Output Current, per pin (IOUT) ±25 mA DC VCC or GND Current, per pin (ICC) ±50 mA Storage Temperature Range (TSTG) Min Max Supply Voltage (VCC) 2 6 V DC Input or Output Voltage 0 VCC V −40 +85 °C (VIN, VOUT ) Operating Temperature Range (TA) Input Rise or Fall Times −65°C to +150°C (tr, tf) VCC = 2.0V 1000 ns VCC = 4.5V 500 ns VCC = 6.0V 400 ns Power Dissipation (PD) (Note 3) 600 mW S.O. Package only 500 mW Note 1: Absolute Maximum Ratings are those values beyond which damage to the device may occur. Lead Temperature (TL) (Soldering 10 seconds) Symbol VIH VIL Parameter Conditions Note 3: Power Dissipation temperature derating — plastic “N” package: − 12 mW/°C from 65°C to 85°C. (Note 4) VCC TA = 25°C Typ TA = −40 to 85°C TA = −55 to 125°C Guaranteed Limits Units Minimum HIGH Level 2.0V 1.5 1.5 1.5 V Input Voltage 4.5V 3.15 3.15 3.15 V 6.0V 4.2 4.2 4.2 V Maximum LOW Level 2.0V 0.5 0.5 0.5 V 4.5V 1.35 1.35 1.35 V 6.0V 1.8 1.8 1.8 V Input Voltage VOH Note 2: Unless otherwise specified all voltages are referenced to ground. 260°C DC Electrical Characteristics Units Minimum HIGH Level VIN = VIH or VIL Output Voltage |IOUT| ≤ 20 µA 2.0V 2.0 1.9 1.9 1.9 V 4.5V 4.5 4.4 4.4 4.4 V 6.0V 6.0 5.9 5.9 5.9 V |IOUT| ≤ 4.0 mA 4.5V 4.2 3.98 3.84 3.7 V |IOUT| ≤ 5.2 mA 6.0V 5.7 5.48 5.34 5.2 V VIN = VIH or VIL VOL Maximum LOW Level VIN = VIH or VIL Output Voltage |IOUT| ≤ 20 µA 2.0V 0 0.1 0.1 0.1 V 4.5V 0 0.1 0.1 0.1 V 6.0V 0 0.1 0.1 0.1 V V VIN = VIH or VIL IIN |IOUT| ≤ 4.0 mA 4.5V 0.2 0.26 0.33 0.4 |IOUT| ≤ 5.2 mA 6.0V 0.2 0.26 0.33 0.4 V VIN = VCC or GND 6.0V ±0.1 ±1.0 ±1.0 µA Maximum Quiescent VIN = VCC or GND 6.0V 8.0 80 160 µA Supply Current IOUT = 0 µA Maximum Input Current ICC Note 4: For a power supply of 5V ±10% the worst case output voltages (VOH, and VOL) occur for HC at 4.5V. Thus the 4.5V values should be used when designing with this supply. Worst case VIH and VIL occur at VCC = 5.5V and 4.5V respectively. (The VIH value at 5.5V is 3.85V.) The worst case leakage current (IIN, ICC, and IOZ) occur for CMOS at the higher voltage and so the 6.0V values should be used. 3 www.fairchildsemi.com MM74HC157 Absolute Maximum Ratings(Note 1) (Note 2) MM74HC157 AC Electrical Characteristics VCC = 5V, TA = 25°C, CL = 15 pF, tr = tf = 6 ns Symbol tPHL, tPLH Parameter Conditions Guaranteed Typ Maximum Propagation Units Limit 14 20 ns 14 20 ns 12 18 ns Delay, Data to Output tPHL, tPLH Maximum Propagation Delay, Select to Output tPHL, tPLH Maximum Propagation Delay, Strobe to Output AC Electrical Characteristics CL = 50 pF, tr = tf = 6 ns (unless otherwise specified) Symbol Parameter Conditions tPHL, tPLH Maximum Propagation Delay, Data to Output VCC TA = 25°C Typ TA = −40 to 85°C TA = −55 to 125°C Guaranteed Limits Units 2.0V 63 125 158 186 ns 4.5V 13 25 32 37 ns ns 6.0V 11 21 27 32 tPHL, tPLH Maximum Propagation 2.0V 63 125 158 186 ns Delay, Select to Output 4.5V 13 25 32 37 ns 6.0V 11 21 27 32 ns tPHL, tPLH Maximum Propagation 2.0V 58 115 145 171 ns Delay, Strobe to Output tTLH, tTHL Maximum Output Rise and Fall Time CIN 4.5V 12 23 29 34 ns 6.0V 10 20 25 29 ns 2.0V 30 75 95 110 ns 4.5V 8 15 19 22 ns 6.0V 7 13 16 19 ns 5 10 10 10 pF Maximum Input Capacitance CPD Power Dissipation (per Capacitance (Note 5) Multiplexer) 57 Note 5: CPD determines the no load dynamic power consumption, PD = CPD VCC2f + ICC VCC, and the no load dynamic current consumption, IS = CPD V CC f + ICC. www.fairchildsemi.com 4 pF MM74HC157 Physical Dimensions inches (millimeters) unless otherwise noted 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150” Narrow Package Number M16A 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M16D 5 www.fairchildsemi.com MM74HC157 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC16 www.fairchildsemi.com 6 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide Package Number N16E LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support 1. Life support devices or systems are devices or systems device or system whose failure to perform can be reawhich, (a) are intended for surgical implant into the sonably expected to cause the failure of the life support body, or (b) support or sustain life, and (c) whose failure device or system, or to affect its safety or effectiveness. to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the www.fairchildsemi.com user. Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. MM74HC157 Quad 2-Input Multiplexer Physical Dimensions inches (millimeters) unless otherwise noted (Continued)