Fairchild MM74HCT244WM Inverting octal 3-state buffer â ¢ octal 3-state buffer Datasheet

Revised May 2005
MM74HCT240 • MM74HCT244
Inverting Octal 3-STATE Buffer • Octal 3-STATE Buffer
General Description
The MM74HCT240 and MM74HCT244 3-STATE buffers
utilize advanced silicon-gate CMOS technology and are
general purpose high speed inverting and non-inverting
buffers. They possess high drive current outputs which
enable high speed operation even when driving large bus
capacitances. These circuits achieve speeds comparable
to low power Schottky devices, while retaining the low
power consumption of CMOS. All three devices are TTL
input compatible and have a fanout of 15 LS-TTL equivalent inputs.
MM74HCT devices are intended to interface between TTL
and NMOS components and standard CMOS devices.
These parts are also plug-in replacements for LS-TTL
devices and can be used to reduce power consumption in
existing designs.
The MM74HCT240 is an inverting buffer and the
MM74HCT244 is a non-inverting buffer. Each device has
two active low enables (1G and 2G), and each enable independently controls 4 buffers.
All inputs are protected from damage due to static discharge by diodes to VCC and Ground.
Features
■ TTL input compatible
■ Typical propagation delay: 14 ns
■ 3-STATE outputs for connection to system buses
■ Low quiescent current: 80 PA
■ High output drive current: 6 mA (min)
Ordering Code:
Order Number
Package Number
MM74HCT240WM
M20B
20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide
M20D
20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
MM74HCT240SJ
MM74HCT240MTC
MM74HCT240N
MTC20
Package Description
20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
N20A
20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
MM74HCT244WM
M20B
20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide
MM74HCT244SJ
M20D
20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
MM74HCT244MTC
MM74HCT244N
MTC20
N20A
20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Connection Diagrams
Pin Assignments for DIP, SOIC, SOP and TSSOP
Top View
MM74HCT240
© 2005 Fairchild Semiconductor Corporation
Top View
MM74HCT244
DS005365
www.fairchildsemi.com
MM74HCT240 • MM74HCT244 Inverting Octal 3-STATE Buffer • Octal 3-STATE Buffer
February 1984
MM74HCT240 • MM74HCT244
Truth Tables
MM74HCT240
H
MM74HCT244
1G
1A
1Y
2G
2A
2Y
1G
1A
1Y
2G
2A
2Y
L
L
H
L
L
H
L
L
L
L
L
L
H
L
H
L
L
H
L
L
H
H
L
H
H
L
Z
H
L
Z
H
L
Z
H
L
Z
H
H
Z
H
H
Z
H
H
Z
H
H
Z
HIGH Level
L
LOW Level
Z
High Impedance
Logic Diagrams
MM74HCT240
www.fairchildsemi.com
MM74HCT244
2
Recommended Operating
Conditions
0.5 to 7.0V
1.5 to VCC 1.5V
0.5 to VCC 0.5V
r20 mA
r35 mA
r70 mA
65qC to 150qC
Supply Voltage (VCC )
DC Input Voltage (VIN)
DC Output Voltage (VOUT)
Clamp Diode Current (IIK, IOK)
DC Output Current, per pin (IOUT)
DC VCC or GND Current, per pin (ICC)
Storage Temperature Range (TSTG)
Supply Voltage (VCC)
DC Input or Output Voltage
600 mW
S.O. Package only
500 mW
Max
4.5
5.5
Units
V
0
VCC
V
40
85
qC
500
ns
(VIN, VOUT)
Operating Temperature Range (TA)
Input Rise or Fall Times
(tr, tf)
Power Dissipation (PD)
(Note 3)
Min
Note 1: Absolute Maximum Ratings are those values beyond which damage to the device may occur.
Note 2: Unless otherwise specified all voltages are referenced to ground.
Note 3: Power Dissipation temperature derating — plastic “N” package: 12 mW/qC from 65qC to 85qC.
Lead Temperature (TL)
260qC
(Soldering 10 seconds)
DC Electrical Characteristics
VCC
5V r10% (unless otherwise specified)
Symbol
VIH
Parameter
TA
Conditions
25qC
Typ
Minimum HIGH Level
TA
40 to 85qC TA 55q to 125qC
Guaranteed Limits
Units
2.0
2.0
2.0
V
0.8
0.8
0.8
V
Input Voltage
VIL
Maximum LOW Level
Input Voltage
VOH
Minimum HIGH Level
VIN-EE
Output Voltage
|IOUT |
20 PA
VIH or VIL
VCC
VCC0.1
VCC0.1
VCC0.1
V
|IOUT |
6.0 mA, VCC
4.5V
4.2
3.98
3.84
3.7
V
7.2 mA, VCC
5.5V
5.2
4.98
4.84
4.7
V
|IOUT |
VOL
Maximum LOW Level
VIN
VIH or VIL
Voltage
|IOUT |
20 PA
0
0.1
0.1
0.1
V
|IOUT |
6.0 mA, VCC
4.5V
0.2
0.26
0.33
0.4
V
7.2 mA, VCC
5.5V
0.2
|IOUT |
IIN
IOZ
ICC
Maximum Input
VIN
VCC or GND,
Current
VIH or VIL
Maximum 3-STATE
VOUT
Output Leakage
G
VIH
Current
G
VIL
Maximum Quiescent
VIN
Supply Current
IOUT
VIN
VCC or GND
VCC or GND
0.26
0.33
0.4
V
r0.05
r0.5
r1.0
PA
r0.25
r2.5
r10
PA
4.0
40
160
PA
1.0
1.3
1.5
mA
0 PA
2.4V or 0.5V (Note 4)
0.6
Note 4: Measured per input. All other inputs at VCC or GND.
3
www.fairchildsemi.com
MM74HCT240 • MM74HCT244
Absolute Maximum Ratings(Note 1)
(Note 2)
MM74HCT240 • MM74HCT244
AC Electrical Characteristics
MM74HCT240, MM74HCT244 VCC
Symbol
tPHL, tPLH
5.0V, tr
6 ns, TA 25qC (unless otherwise specified)
tf
Parameter
Conditions
Maximum Output
Typ
Guaranteed
Limits
Units
CL
45 pF
14
18
ns
Maximum Output
CL
45 pF
20
30
ns
Enable Time
RL
1 k:
Maximum Output
CL
5 pF
16
25
ns
Disable Time
RL
1 k:
Propagation Delay
tPZL, tPZH
tPLZ, tPHZ
AC Electrical Characteristics
MM74HCT240, MM74HCT244 VCC
Symbol
tPHL, tPLH
tPZH, tPZL
5.0V r 10%, tr
Parameter
tTHL, tTLH
TA
Conditions
25qC
Typ
TA
40 to 85qC TA 55q to 125qC
Guaranteed Limits
Units
Maximum Output
CL
50 pF
14
20
25
30
ns
Propagation Delay
CL
150 pF
20
28
35
42
ns
Maximum Output
RL
1 k:
Enable Time
tPHZ, tPLZ
tf 6 ns (unless otherwise specified)
Maximum Output
RL
1 k:
Disable Time
CL
50 pF
Maximum Output
CL
50 pF
CL
50 pF
21
30
38
45
ns
CL
150 pF
26
42
53
63
ns
16
25
32
38
ns
6
12
15
18
ns
10
15
15
15
pF
15
20
20
20
pF
Rise and Fall Time
CIN
Maximum Input
Capacitance
COUT
Maximum Output
Capacitance
CPD
Power Dissipation
Capacitance (Note 5)
(per buffer)
G
V CC, G
GND
5
pF
G
GND, G
VCC
90
pF
Note 5: CPD determines the no load dynamic power consumption, PD
IS CPD VCC f I CC.
www.fairchildsemi.com
C PD VCC2 f ICC VCC, and the no load dynamic current consumption,
4
MM74HCT240 • MM74HCT244
Physical Dimensions inches (millimeters) unless otherwise noted
20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide
Package Number M20B
5
www.fairchildsemi.com
MM74HCT240 • MM74HCT244
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
Package Number M20D
www.fairchildsemi.com
6
MM74HCT240 • MM74HCT244
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Package Number MTC20
7
www.fairchildsemi.com
MM74HCT240 • MM74HCT244 Inverting Octal 3-STATE Buffer • Octal 3-STATE Buffer
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
Package Number N20A
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
www.fairchildsemi.com
www.fairchildsemi.com
8
Similar pages