MMBT3906L, SMMBT3906L General Purpose Transistor PNP Silicon Features • S Prefix for Automotive and Other Applications Requiring Unique • www.onsemi.com Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant COLLECTOR 3 1 BASE MAXIMUM RATINGS Rating Symbol Value Unit Collector −Emitter Voltage VCEO −40 Vdc Collector −Base Voltage VCBO −40 Vdc Emitter −Base Voltage VEBO −5.0 Vdc IC −200 mAdc ICM −800 mAdc Collector Current − Continuous Collector Current − Peak (Note 3) 2 EMITTER 3 1 2 SOT−23 (TO−236) CASE 318 STYLE 6 THERMAL CHARACTERISTICS Characteristic Total Device Dissipation FR− 5 Board (Note 1) @ TA = 25°C Derate above 25°C Thermal Resistance, Junction−to−Ambient Total Device Dissipation Alumina Substrate, (Note 2) @ TA = 25°C Derate above 25°C Thermal Resistance, Junction−to−Ambient Junction and Storage Temperature Symbol Max Unit 225 1.8 mW mW/°C 556 °C/W 300 2.4 mW mW/°C RqJA 417 °C/W TJ, Tstg −55 to +150 °C PD RqJA MARKING DIAGRAM 2A M G G PD Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. FR− 5 = 1.0 0.75 0.062 in. 2. Alumina = 0.4 0.3 0.024 in. 99.5% alumina. 3. Reference SOA curve. 1 2A = Specific Device Code M = Date Code* G = Pb−Free Package (Note: Microdot may be in either location) *Date Code orientation and/or overbar may vary depending upon manufacturing location. ORDERING INFORMATION Shipping† Device Package MMBT3906LT1G SOT−23 (Pb−Free) 3,000 / Tape & Reel MMBT3906LT3G SOT−23 (Pb−Free) 10,000 / Tape & Reel SMMBT3906LT1G SOT−23 (Pb−Free) 3,000 / Tape & Reel SMMBT3906LT3G SOT−23 (Pb−Free) 10,000 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. © Semiconductor Components Industries, LLC, 1994 October, 2016 − Rev. 12 1 Publication Order Number: MMBT3906LT1/D MMBT3906L, SMMBT3906L ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Max −40 − −40 − −5.0 − − −50 − −50 60 80 100 60 30 − − 300 − − − − −0.25 −0.4 −0.65 − −0.85 −0.95 250 − − 4.5 − 10 2.0 12 0.1 10 100 400 3.0 60 − 4.0 Unit OFF CHARACTERISTICS Collector −Emitter Breakdown Voltage (IC = −1.0 mAdc, IB = 0) V(BR)CEO Collector −Base Breakdown Voltage (IC = −10 mAdc, IE = 0) V(BR)CBO Emitter −Base Breakdown Voltage (IE = −10 mAdc, IC = 0) V(BR)EBO Base Cutoff Current (VCE = −30 Vdc, VEB = −3.0 Vdc) IBL Collector Cutoff Current (VCE = −30 Vdc, VEB = −3.0 Vdc) ICEX Vdc Vdc Vdc nAdc nAdc ON CHARACTERISTICS (Note 4) DC Current Gain (IC = −0.1 mAdc, VCE = −1.0 Vdc) (IC = −1.0 mAdc, VCE = −1.0 Vdc) (IC = −10 mAdc, VCE = −1.0 Vdc) (IC = −50 mAdc, VCE = −1.0 Vdc) (IC = −100 mAdc, VCE = −1.0 Vdc) HFE Collector −Emitter Saturation Voltage (IC = −10 mAdc, IB = −1.0 mAdc) (IC = −50 mAdc, IB = −5.0 mAdc) VCE(sat) Base −Emitter Saturation Voltage (IC = −10 mAdc, IB = −1.0 mAdc) (IC = −50 mAdc, IB = −5.0 mAdc) VBE(sat) − Vdc Vdc SMALL− SIGNAL CHARACTERISTICS Current −Gain − Bandwidth Product (IC = −10 mAdc, VCE = −20 Vdc, f = 100 MHz) fT Output Capacitance (VCB = −5.0 Vdc, IE = 0, f = 1.0 MHz) Cobo Input Capacitance (VEB = −0.5 Vdc, IC = 0, f = 1.0 MHz) Cibo Input Impedance (IC = −1.0 mAdc, VCE = −10 Vdc, f = 1.0 kHz) hie Voltage Feedback Ratio (IC = −1.0 mAdc, VCE = −10 Vdc, f = 1.0 kHz) hre Small −Signal Current Gain (IC = −1.0 mAdc, VCE = −10 Vdc, f = 1.0 kHz) hfe Output Admittance (IC = −1.0 mAdc, VCE = −10 Vdc, f = 1.0 kHz) hoe Noise Figure (IC = −100 mAdc, VCE = −5.0 Vdc, RS = 1.0 kW, f = 1.0 kHz) NF MHz pF pF kW X 10− 4 − mmhos dB SWITCHING CHARACTERISTICS Delay Time Rise Time Storage Time Fall Time (VCC = −3.0 Vdc, VBE = 0.5 Vdc, IC = −10 mAdc, IB1 = −1.0 mAdc) td − 35 tr − 35 (VCC = −3.0 Vdc, IC = −10 mAdc, IB1 = IB2 = −1.0 mAdc) ts − 225 tf − 75 ns ns Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 4. Pulse Test: Pulse Width v 300 ms, Duty Cycle v 2.0%. www.onsemi.com 2 MMBT3906L, SMMBT3906L 3V 3V < 1 ns +9.1 V 275 275 < 1 ns 10 k +0.5 V 10 k 0 CS < 4 pF* 10.6 V 300 ns DUTY CYCLE = 2% CS < 4 pF* 1N916 10 < t1 < 500 ms 10.9 V t1 DUTY CYCLE = 2% * Total shunt capacitance of test jig and connectors Figure 1. Delay and Rise Time Equivalent Test Circuit Figure 2. Storage and Fall Time Equivalent Test Circuit TYPICAL TRANSIENT CHARACTERISTICS 10 5000 7.0 3000 2000 Cobo 5.0 Q, CHARGE (pC) CAPACITANCE (pF) TJ = 25°C TJ = 125°C Cibo 3.0 2.0 VCC = 40 V IC/IB = 10 1000 700 500 300 200 QT QA 1.0 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 REVERSE BIAS (VOLTS) 100 70 50 20 30 40 1.0 2.0 3.0 Figure 3. Capacitance 5.0 7.0 10 20 30 50 70 100 IC, COLLECTOR CURRENT (mA) 200 Figure 4. Charge Data 500 500 IC/IB = 10 300 200 VCC = 40 V IB1 = IB2 300 200 tr @ VCC = 3.0 V 15 V 30 20 t f , FALL TIME (ns) TIME (ns) IC/IB = 20 100 70 50 100 70 50 30 20 IC/IB = 10 40 V 10 7 5 10 2.0 V 7 5 td @ VOB = 0 V 1.0 2.0 3.0 5.0 7.0 10 20 30 50 70 100 200 1.0 2.0 3.0 5.0 7.0 10 20 30 50 70 100 IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 5. Turn −On Time Figure 6. Fall Time www.onsemi.com 3 200 MMBT3906L, SMMBT3906L TYPICAL AUDIO SMALL−SIGNAL CHARACTERISTICS NOISE FIGURE VARIATIONS (VCE = − 5.0 Vdc, TA = 25°C, Bandwidth = 1.0 Hz) 12 SOURCE RESISTANCE = 200 W IC = 1.0 mA 4.0 f = 1.0 kHz SOURCE RESISTANCE = 200 W IC = 0.5 mA 3.0 SOURCE RESISTANCE = 2.0 k IC = 50 mA 2.0 SOURCE RESISTANCE = 2.0 k IC = 100 mA 1.0 0 0.1 0.2 0.4 IC = 1.0 mA 10 NF, NOISE FIGURE (dB) NF, NOISE FIGURE (dB) 5.0 1.0 2.0 4.0 10 f, FREQUENCY (kHz) 20 40 IC = 0.5 mA 8 6 4 IC = 50 mA 2 IC = 100 mA 0 100 0.1 0.2 0.4 1.0 2.0 4.0 10 20 Rg, SOURCE RESISTANCE (k OHMS) Figure 7. 40 100 Figure 8. h PARAMETERS (VCE = − 10 Vdc, f = 1.0 kHz, TA = 25°C) 100 hoe, OUTPUT ADMITTANCE (m mhos) h fe , DC CURRENT GAIN 300 200 100 70 50 70 50 30 20 10 7 30 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 IC, COLLECTOR CURRENT (mA) 5 5.0 7.0 10 0.1 0.2 Figure 9. Current Gain h re , VOLTAGE FEEDBACK RATIO (X 10 -4 ) h ie , INPUT IMPEDANCE (k OHMS) 10 7.0 5.0 3.0 2.0 1.0 0.7 0.5 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 IC, COLLECTOR CURRENT (mA) 5.0 7.0 10 Figure 10. Output Admittance 20 0.3 0.2 0.3 0.5 0.7 1.0 2.0 3.0 IC, COLLECTOR CURRENT (mA) 10 7.0 5.0 3.0 2.0 1.0 0.7 0.5 5.0 7.0 10 0.1 Figure 11. Input Impedance 0.2 0.3 0.5 0.7 1.0 2.0 3.0 IC, COLLECTOR CURRENT (mA) 5.0 7.0 10 Figure 12. Voltage Feedback Ratio www.onsemi.com 4 MMBT3906L, SMMBT3906L TYPICAL STATIC CHARACTERISTICS 1000 VCE = 1 V hFE, DC CURRENT GAIN TJ = 150°C 25°C -55°C 100 10 1.0 10 100 1000 IC, COLLECTOR CURRENT (mA) VCE, COLLECTOR EMITTER VOLTAGE (VOLTS) Figure 13. DC Current Gain 1.0 TJ = 25°C 0.8 IC = 1.0 mA 10 mA 30 mA 100 mA 0.6 0.4 0.2 0 0.01 0.02 0.03 0.05 0.07 0.1 0.2 0.3 0.5 IB, BASE CURRENT (mA) 0.7 1.0 Figure 14. Collector Saturation Region www.onsemi.com 5 2.0 3.0 5.0 7.0 10 MMBT3906L, SMMBT3906L 1.4 0.45 IC/IB = 10 IC/IB = 10 150°C 0.40 VBE(sat), BASE−EMITTER SATURATION VOLTAGE (V) VCE(sat), COLLECTOR−EMITTER SATURATION VOLTAGE (V) 0.50 25°C 0.35 −55°C 0.30 0.25 0.20 0.15 0.10 −55°C 0.8 25°C 0.6 150°C 0.4 0.2 0.001 0.01 0.1 1 0.0001 0.001 0.01 0.1 1 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) Figure 15. Collector Emitter Saturation Voltage vs. Collector Current Figure 16. Base Emitter Saturation Voltage vs. Collector Current 1.4 1000 fT, CURRENT−GAIN−BANDWIDTH PRODUCT (MHz) VCE = 1 V 1.2 1.0 −55°C 0.8 25°C 0.6 150°C 0.4 0.2 VCE = 2 V TA = 25°C 100 10 0.0001 0.001 0.01 0.1 1 0.1 1 10 100 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (mA) Figure 17. Base Emitter Voltage vs. Collector Current Figure 18. Current Gain Bandwidth vs. Collector Current 1 1.0 0.5 1000 qVC FOR VCE(sat) 1 ms 1s 100 ms +25°C TO +125°C 10 ms Thermal Limit 0.1 0 -55°C TO +25°C IC (A) VBE(on), BASE−EMITTER VOLTAGE (V) 1.0 0.05 0 q V , TEMPERATURE COEFFICIENTS (mV/ °C) 1.2 -0.5 +25°C TO +125°C 0.01 -1.0 -55°C TO +25°C qVB FOR VBE(sat) -1.5 -2.0 Single Pulse Test @ TA = 25°C 0.001 0 20 40 60 80 100 120 140 IC, COLLECTOR CURRENT (mA) 160 0.01 180 200 0.1 1 10 VCE (Vdc) Figure 19. Temperature Coefficients Figure 20. Safe Operating Area www.onsemi.com 6 100 MMBT3906L, SMMBT3906L PACKAGE DIMENSIONS SOT−23 (TO−236) CASE 318−08 ISSUE AR D NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF THE BASE MATERIAL. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. 0.25 3 E 1 2 T HE DIM A A1 b c D E e L L1 HE T L 3X b L1 VIEW C e TOP VIEW A A1 SIDE VIEW c SEE VIEW C MIN 0.89 0.01 0.37 0.08 2.80 1.20 1.78 0.30 0.35 2.10 0° MILLIMETERS NOM MAX 1.00 1.11 0.06 0.10 0.44 0.50 0.14 0.20 2.90 3.04 1.30 1.40 1.90 2.04 0.43 0.55 0.54 0.69 2.40 2.64 −−− 10 ° MIN 0.035 0.000 0.015 0.003 0.110 0.047 0.070 0.012 0.014 0.083 0° INCHES NOM 0.039 0.002 0.017 0.006 0.114 0.051 0.075 0.017 0.021 0.094 −−− MAX 0.044 0.004 0.020 0.008 0.120 0.055 0.080 0.022 0.027 0.104 10° STYLE 6: PIN 1. BASE 2. EMITTER 3. COLLECTOR END VIEW RECOMMENDED SOLDERING FOOTPRINT* 3X 2.90 3X 0.90 0.95 PITCH 0.80 DIMENSIONS: MILLIMETERS *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] ◊ N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 7 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MMBT3906LT1/D