MOAH and MOAZ Series / 1” Square, 5 Pin OCXO ¾ Oven Controlled Oscillator ¾ 1.0 MHz to 150.0 MHz Available ¾ SC Crystal Option ¾ -40°C to 85° Available ¾ ±10ppb to ±500ppb PART NUMBERING GUIDE: ELECTRICAL SPECIFICATIONS: MOA H 5 S 100 B Output Type H = HCMOS Z = Sinewave Frequency Range 1.0 MHz to 150.0MHz ±10ppb to ±500ppb Frequency Stability -40°C to 85°C max* Operating Temperature * All stabilities not available, please consult MMD for availablity. -40°C to 95°C Storage Temperature 50Ω Sinewave ±3dBM Output 10% Vdd max 30pF HCMOS 90% Vdd min Supply Voltage 3.3V 5.0V 12.0V (Vdd) Supply typ 450mA 300mA 120mA Current max 850mA 500mA 250mA 4min. @ 25°C Warm-up Time Vc Input Impedance 100K Ohms typical Crystal AT or SC Cut options Phase Noise SC AT Offset 10 MHZ 100 MHZ 10 MHZ 10 Hz -105dBc -90dBc -91dBc 100 Hz -125dBc -120dBc -120dBc 1000 Hz -140dBc -145dBc -135dBc 10K Hz -145dBc -150dBc -138dBc ±10ppm Volt. Control 0 to ±3ppm typ. typ. VCC Aging (after 30 days) ±0.1ppm/yr. ±1.0ppm/yr Frequency Operating Temperature A = 0ºC to 50ºC B = -10ºC to 60ºC C = -20ºC to 70ºC D = -30ºC to 70ºC E = -30ºC to 80ºC F = -40ºC to 85ºC Supply Voltage 3 = 3.3 Volt 5 = 5 Volt 12 = 12 Volt Frequency Stability 010 = ±10ppb 050 = ±50ppb 100 = ±100ppb 500 = ±500ppb Crystal Cut Blank = AT Cut S = SC Cut MECHANICAL DETAILS: 26.16 [1.030] MAX 13.46 [.530] MAX 19.06 [.750] 6.35 [.250] 5 MXX.XXX SYYWWL CCCCC 26.16 [1.030] MAX STANDOFF 4 PLACES 9.53 [.375] 0.76 [.030] 1 6.35 [.250] 9.53 [.375] 2 19.06 [.750] 12.70 [.500] PIN CONNECTIONS PIN 1 OUTPUT CASE GROUND PIN 2 PIN 3 VOLTAGE CONTROL N/C PIN 4 PIN 5 4 SUPPLY VOLTAGE 3 0.65 [.025] DIMENSION IN BRACKETS ARE IN INCHES EXTERNAL BYPASS CAPACITOR IS RECOMMENDED DEVICE SHALL BE MARKED PER MMD DRAWING DO-00336 MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Specifications subject to change without notice Revision: MOAH040708D