Photoelectrics Through-beam System, Relay Output Type MPF.RS • • • • • • • • • • • • • Industrial doors and gates Range: 15 m Modulated infrared light Option with individually adjustable channel sensitivity Amplifier with “Snap-ON” photoelectric switches Supply voltage: 12-24 VAC/DC, 115 VAC or 230 VAC Output: SPST relay LED indications for light ON and supply ON 4 module M36 DIN rail housing Ø12 mm “Snap-ON”, Ø18 or M14 photoelectric housing 1, 2 or 3 multiplexed channels With make or break test input UL 325, EN 12453 (TÜV approved) Product Description Ordering Key The MPFRS.. is a family of inexpensive general purpose photoelectric sensors in 3 different types of housings with separate amplifier. They are designed to meet the requirements for industrial doors and gates. The “Snap-ON” photo switch can be mounted in material with a thickness from 0.6 mm and up to 2.25 mm. The sensor set is easy to use and no adjustments are necessary. The amplifier has a Amplifier test input designed to disable the emitters and therefore evaluate the sensor function. Multiplexed channels prevent cross-talk between each set of photosensors. The amplifiers are available with the following voltages: 12-24 VAC/DC, 115 VAC and 230 VAC. The output is made as positive security e.g. power lost, short-circuit or broken sensor cable makes the relay go to off state. Type Selection, Amplifier MPF 3 230 RS AI Type Number of channels Voltage supply Output relay Safety Adjustable sensitivity Inverted test input (break) Sensor MPF T 15 M14 4C Type Emitter Range Housing diameter Optical angle Connectors on cable Housing WxHxD Ordering no. Supply: 12-24 VAC/DC Ordering no. Supply: 115 VAC Ordering no. Supply: 230 VAC 70 x 57 x 86 mm MPF1-912 RS MPF2-912 RS MPF3-912 RS MPF1-912 RSI *) MPF2-912 RSI *) MPF3-912 RSI *) MPF1-912 RSA *) MPF2-912 RSA *) MPF3-912 RSA *) MPF1-912 RSAI *) MPF2-912 RSAI *) MPF3-912 RSAI *) MPF1-115 RS MPF2-115 RS MPF3-115 RS MPF1-115 RSI *) MPF2-115 RSI *) MPF3-115 RSI *) MPF1-115 RSA *) MPF2-115 RSAv MPF3-115 RSA *) MPF1-115 RSAI *) MPF2-115 RSAI *) MPF3-115 RSAI *) MPF1-230 RS MPF2-230 RS MPF3-230 RS MPF1-230 RSI *) MPF2-230 RSI *) MPF3-230 RSI *) MPF1-230 RSA *) MPF2-230 RSA MPF3-230 RSA *) MPF1-230 RSAI *) MPF2-230 RSAI *) MPF3-230 RSAI *) *) Products available on request Type Selection, Photoelectric Switch Housing diameter Rated operational distance (Sn) Optical angle Ordering no. Emitter Ordering no. Receiver Ø12 mm M14 D18 Ø12 mm M14 D18 Fitting for Ø12 15 m 15 m 15 m 15 m 15 m 15 m 4° 4° 4° 4° 4° 4° MPFT 15-4 MPFT 15-M14-4 MPFT 15-D18-4 MPFT 15-4C MPFT 15-M14-4C MPFT 15-D18-4C MPFR-4 MPFR-M14-4 MPFR-D18-4 MPFR-4C MPFR-M14-4C MPFR-D18-4C Specifications are subject to change without notice (12.09.2005) Ordering no. Fitting AMPF-MB1 1 MPFRS Specifications, Amplifier Rated operational volt. AC types (UB) Terminals 1 & 3 MPF.- 230 RS. MPF.- 115 RS. MPF.- 912 RS. Dielectric voltage MPF.- 230 RS. Rated impulse withstand volt. Rated operational power MPF.- 912 RS AC supply DC supply MPF.- 115/230 RS AC supply DC supply Output Specifications Resistive load MPF.-xxx RS, RSA, RSI, RSAI 600.000 switchings 300.000 switchings 100.000 switchings AC15 AC14 DC13 Rated insulation volt. (Ui) MPF.- 230 RS. MPF.- 115 RS. MPF.- 912 RS. Operating frequency (f) Light/dark ratio 1:1 Contact output Response time OFF-ON (tON) ON-OFF (tOFF) Power ON delay (tv) 230 VAC ± 15%, 50 to 60 Hz 115 VAC ± 15%, 50 to 60 Hz 12-24 VAC/DC ± 15%, 50 to 60 Hz 4 kVAC (rms) 4 kV (1.2/50 μs) 3 VA 2W max. 4.5 VA max. 4.5 VA Output function MPF1+2 MPF3 Indication function Supply ON Beam ON (no object present) Environment Overvoltage category Degree of protection Pollution degree Temperature Operating Storage Connection Protection output 1 A@250 VAC/30 VDC 2 A@250 VAC/30 VDC 2 A@250 VAC/30 VDC (UL) 0.75 A@240 VAC 0.60 A@120 VAC 0.22 A@125 VDC 250 VAC (rms) 120 VAC (rms) 50 VAC (rms), 50 VDC 10 Hz ≤ 50 ms ≤ 40 ms ≤ 300 ms Test input MPF.- 230 RS. MPF.- 115 RS. MPF.- 912 RS. Testfunction activated Testfunction deactivated MPF.- 912 RSI. Testfunction deactivated Testfunction activated Housing material Weight MPF.- 115/230 RS MPF.- 912 RS CE-marking UL-marking TÛV-marking Relay 2 x SPST Relay 2 x SPST + 2 x SPST LED, green LED, yellow III (IEC 66064) IP 40 (IEC 60529/60947-5-2) 3 (IEC 60664/60664A, 60947-1) -20° to +60°C (-4° to +140°F) -30° to +80°C (-22° to +176°F) Screw terminals (max. 2.5 mm2) Reverse output, transients, short-circuit Potential-free contact Potential-free contact Max. 28 V@15 mA AC/DC ≥ 3.5 V AC/DC ≤ 1.0 V AC/DC Max. 28 V@15 mA AC/DC ≥ 3.5 V AC/DC ≤ 1.0 V AC/DC PC 280 g 126 g Yes Yes (UL 508, UL 325) Yes (EN 12453) Specifications, Photoelectric Switches Rated operation dist. (Sn) Light source Light type Ambient light Housing material MPFT15-4/C MPFT15-D18-4/C MPFR-4/C MPFR-D18-4/C Housing Backpart MPFT15-M14-4/C MPFR15-M14-4/C Housing Backpart Connection MPFT15-XXX-4 MPFR15-XXX-4 Cable 2 15 m - 8 m (UL 325) LED 880 nm Infrared modulated > 20.000 lux PC ABS Stainless steel/PC PTE PVC, grey, 10 m, Ø 2.9 mm2 MPFT15-XXX-4C Red connector pair MPFR15-XXX-4C White connector pair Connector is placed 15 cm from sensorhead Cable PVC, grey, 10 m, Ø 2.9 mm2 Degree of protection IP 67 (IEC 60529/60947-5-2) Mounting “Snap-ON” Ø12 mm or fitting MPFT15-4/C MPFR-4/C Rubber profile MPFT15-D18-4/C MPFR-D18-4/C D18 Threaded barrel MPFT15-M14-4/C MPFR-M14-4/C CE-marking UL-marking TÛV-marking M14 Yes Yes (UL 508, UL 325) Yes (EN 12453) Specifications are subject to change without notice (12.09.2005) MPFRS 2) RX3 1) RX2 RX1 2) TX2 TX3 1) TX1 RX3 RX2 RX1 TX1 TX2 TX3 Wiring Diagrams 13 14 15 16 17 18 19 20 21 22 23 24 3 2 1 1 EMITTER 2 3 13 14 15 16 17 18 19 20 21 22 23 24 TEST RECEIVER 3 2 RD RD 1 1 BK RD BK BK EMITTER BU BK 2 3 BU BU TEST RECEIVER + OUT 3 250 VAC OUT 1+2 SUPPLY 230 V + 1 2 30 VDC Max. 2 A TP TP 3 4 5 6 7 8 + SUPPLY 115/230 V 9 10 11 12 OUT 3 250 VAC OUT 2 30 VDC Max. 2 A TP TP 1 2 3 4 5 6 7 8 9 10 11 12 1) Not MPF1 and MPF2 2) Not MPF1 1) Not MPF1 and MPF2 2) Not MPF1 Test input make, shown for 115/230 version Test input break, shown for 115/230 version AC/DC 1 AC/DC AC/DC 23 24 TEST 23 AC/DC 24 23 TEST 24 23 TEST DC 24 TEST DC DC 23 24 TEST 23 DC 23 24 TEST 24 TEST Test input make, shown for 912 version 23 24 TEST Test input break, shown for 912 version Operation Diagram Power supply Object present Output contact closed Tv Toff Specifications are subject to change without notice (12.09.2005) Ton Ton 3 MPFRS Detection Diagram Excess Gain Emitter Y X (feet) Receiver 60 65.6 23.8 40 15.7 20 7.9 0 0 -20 -7.9 -40 -15.7 -60 -23.8 0 26.2 4 39.4 8 12 Sensing Range (m) 52.5 16 Excess gain 1000 9.5 (inch) (cm) 0 100 10 1 1000 10000 20 100000 Range [mm] Max. Rating ------ Potentiometer in min. Dimensions Ø2.9 3 2 1 1 EMITTER 2 CH2 CH3 OUT 3 250 VAC OUT 1+2 30 VDC MAX 2A SUPPLY 230 V Ø11.8 TEST CH1 MPF3-230RS PHOTOELECTRIC AMPLIFIER 2.6 17.3 3 RECEIVER 48 57 70 Amplifier 20 2.6 Ø10 Ø2.9 5 Ø12.8 86 Ø15 M14 x 1 0.6 - 2.25 mm Ø12 Ø12 M14 19 To be mounted in material with a thickness of 0.6 - 2.25 mm 27.6 8. 5 1 33.2 24 Ø2.9 R6 Ø17.5 28.3 Ø6 Ø22 Fitting for Ø12 4 D18 Specifications are subject to change without notice (12.09.2005) Installation Hints To avoid interference from inductive voltage/ current peaks, separate the prox. switch power cables from any other power cables, e.g. motor, contactor or solenoid cables Relief of cable strain Protection of the sensing face Switch mounted on mobile carrier A proximity switch should not serve as mechanical stop Any repetitive flexing of the cable should be avoided Incorrect Correct The cable should not be pulled Delivery Contents • Amplifier, MPF.. • Installation instruction • Packaging: cardboard box Specifications are subject to change without notice (12.09.2005) 5