eSsmi-Concluckoi {Pioduaki,
TELEPHONE: (973) 376-2922
(212) 227-6005
FAX: (973) 376-8960
20 STERN AVE
SPRINGFIELD, NEW JERSEY 07081
U.S.A.
ICTE5.0 to ICTE15C MPTE-5 to MPTE-45
1N6373to 1N6381 and 1N6382to 1N6389
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
STANDOFF VOLTAGE- 5.0 to 45.0V
1500 Watt Peak Power
FEATURES
> Plastic package has Underwriters Laboratory
Flammability Classification 94 V-O
• Glass passivated chip junction in Molded Plastic package
> 1500W surge capability at 1ms
> Excellent clamping capability
> Lowzener inpedance
> Fast response time: typically less than
1.0 ps from 0 volts to BV min.
• Typical IR less than 1uA above 10V
> High temperature soldering guaranteed:
250°C/10 seconds/ .375", (9.5mm) lead
length, Slbs., (2.3kg) tension
> Includes 1N6373 thru 1N6385
DO-201
I.O (35.4)
MIN
0.210(3.3
ttSOft
CM.
0.285(7.2)
t
MECHANICAL DATA
Case: JEDEC DO-201 Molded plastic
Terminals: Plated Axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denoted positive end (cathode)
except Bipolar
Mounting Position: Any
Weight: 0.045 ounces, 1.2 grams
I
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
RATING
Peak Pulse Power Dissipation at TA = 25 °C, TP = 1ms
(NOTE 1)
Peak Pulse Current of on 10/1000 us waveform (Note 1)
Steady State Power Dissipation at TL = 75°C
Lead lengths .375", 9.5mm (Note 2)
Peak Forward Surge Current, 8.3ms Single Half Sine-wave
Superimposed on Rated Load, (JEDEC Method)(Note 3)
Maximum instantaneous forward voltage at 100A for
unidirectional only
Operatings and Storage Temperature Range
SYMBOL
VALUE
UNITS
Pppm
Minimum 1500
Watts
Ippm
SEE TABLE 1
Amps
Pm(AV)
5.0
Watts
IFSM
200
Amps
Vf
3.5
Volt
Tj, Tstg
-55+175
°C
NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensions without
notice, fnformation furnished by N.( Semi-Conductors is believed to be both accurate and reliable at the time of going
to press. However, NJ Seini-Conductors assumes no responsibilily for any errors or omissions discovered in its use.
NI Semi-Conductors encourages customers to verify that datasheets are current before placing orders.
ICTE5.0 tou ICTE15C MPTE-5 to MPTE-45
1N6373 to 1N6381 and 1N6382 to 1N6389
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
STANDOFF VOLTAGE- 5.0 to 45.0V
1500 Watt Peak Power
Part Numbers
ICTE-5*
ICTE-8
ICTE-10
ICTE-12
ICTE-15
ICTE-18
ICTE-22
ICTE-36
ICTE-45
1N6373
1N6374
1 N6375
1N6376
1 N6377
1 N6378
1N6379
1N6380
1N6381
MPTE-5*
MPTE-8
MPTE-10
MPTE-12
MPTE-18
MPTE-18
MPTE-22
MPTE-36
MPTE-45
ICTE-8C
ICTE-10C
ICTE-12C
ICTE-15C
ICTE-18C
ICTE-22C
ICTE-36C
ICTE-45C
1N6382
1N6383
1 N6384
1N6385
1N6386
1N6387
1N6388
1N6389
MPTE-8C
MPTE-10C
MPTE-12C
MPTE-15C
MPTE-18C
MPTE-22C
MPTE-36C
MPTE-45C
REVERSE
MINIMUM
STANDOFF BREAKDOWN
VOLTAGE
VOLTAGE
VBR@1mA
(VRWM)
(Volts)
(V)
"ICTE-5 is not available in Bi-directional.
5*
MAXIMUM
REVERSE
LEAKAGE
IR@Vr
MAXIMUM
CLAMPING
VOLTAGE
(Vc)@
MAXIMUM MAXIMUM
CLAMPING
PEAK
VOLTAGE
PULSE
(Vc) @ lpp=1A CURRENT
(Volts)
Ipp (A)
(MA)
lpp=1A
(Volts)
6.0
300.0
7.1
7.5
160.0
11.5
14.1
8.0
9.4
25.0
11.3
10.0
12.0
15.0
18.0
22.0
36.0
45.0
11.7
14.1
17.6
21.2
25.9
42.4
52.9
2.0
2.0
2.0
2.0
2.0
2.0
2.0
13.7
16.1
20.1
24.2
29.8
50.6
63.3
16.5
20.6
25.2
32.0
54.3
70.0
100.0
90.0
70.0
60.0
50.0
40.0
23.0
19.0
8.0
9.4
11.7
14.1
17.6
21.2
25.9
42.4
52.9
50
2.0
2.0
2.0
2.0
2.0
2.0
2.0
11.4
14.1
16.7
20.8
24.8
30.8
50.6
63.3
11.6
14.5
17.1
21.4
25.5
32.0
54.3
70.0
100.0
90.0
70.0
60.0
50.0
40.0
23.0
19.0
10.0
12.0
15.0
18.0
22.0
36.0
45.0
Suffix 'C' denotes Bi-directional device.