Freescale MRFE6VP61K25HSR5 Rf power ldmos transistors high ruggedness n--channel enhancement--mode lateral mosfet Datasheet

Freescale Semiconductor
Technical Data
Document Number: MRFE6VP61K25H
Rev. 4, 3/2013
RF Power LDMOS Transistors
High Ruggedness N--Channel
Enhancement--Mode Lateral MOSFETs
These high ruggedness devices are designed for use in high VSWR industrial
(including laser and plasma exciters), broadcast (analog and digital), aerospace
and radio/land mobile applications. They are unmatched input and output
designs allowing wide frequency range utilization, between 1.8 and 600 MHz.
 Typical Performance: VDD = 50 Volts, IDQ = 100 mA
Pout
(W)
f
(MHz)
Gps
(dB)
D
(%)
Pulse
(100 sec, 20% Duty Cycle)
1250 Peak
230
24.0
74.0
CW
1250 CW
230
22.9
74.6
Signal Type
MRFE6VP61K25HR6
MRFE6VP61K25HSR5
MRFE6VP61K25GSR5
1.8--600 MHz, 1250 W CW, 50 V
WIDEBAND
RF POWER LDMOS TRANSISTORS
Application Circuits (1) — Typical Performance
Frequency
(MHz)
Signal Type
Pout
(W)
Gps
(dB)
D
(%)
27
CW
1300
27
81
40
CW
1300
26
85
81.36
CW
1250
27
84
87.5--108
CW
1100
24
80
144--148
CW
1250
26
78
170--230
DVB--T
225
25
30
352
Pulse
(200 sec,
20% Duty Cycle)
1250
21.5
66
352
CW
1150
20.5
68
500
CW
1000
18
58
NI--1230--4H
MRFE6VP61K25HR6
NI--1230--4S
MRFE6VP61K25HSR5
1. Contact your local Freescale sales office for additional information on specific
circuit designs.
Load Mismatch/Ruggedness
Frequency
(MHz)
230
Signal Type
VSWR
Pulse
(100 sec, 20%
Duty Cycle)
>65:1 at all
Phase Angles
Pout
(W)
Test
Voltage
1500 Peak
(3 dB
Overdrive)
50
NI--1230--4S GULL
MRFE6VP61K25GSR5
Result
No Device
Degradation
Features
Gate A 3
1 Drain A
Gate B 4
2 Drain B
 Unmatched Input and Output Allowing Wide Frequency Range Utilization
 Device can be used Single--Ended or in a Push--Pull Configuration
Qualified Up to a Maximum of 50 VDD Operation
Characterized from 30 V to 50 V for Extended Power Range
Suitable for Linear Application with Appropriate Biasing
Integrated ESD Protection with Greater Negative Gate--Source Voltage Range
for Improved Class C Operation
 Characterized with Series Equivalent Large--Signal Impedance Parameters




 In Tape and Reel. R6 Suffix = 150 Units, 56 mm Tape Width, 13--inch Reel.
R5 Suffix = 50 Units, 56 mm Tape Width, 13--inch Reel.
 Freescale Semiconductor, Inc., 2010--2013. All rights reserved.
RF Device Data
Freescale Semiconductor, Inc.
(Top View)
Note: The backside of the package is the
source terminal for the transistor.
Figure 1. Pin Connections
MRFE6VP61K25HR6 MRFE6VP61K25HSR5 MRFE6VP61K25GSR5
1
Table 1. Maximum Ratings
Rating
Symbol
Value
Unit
Drain--Source Voltage
VDSS
--0.5, +133
Vdc
Gate--Source Voltage
VGS
--6.0, +10
Vdc
Storage Temperature Range
Tstg
-- 65 to +150
C
Case Operating Temperature
TC
150
C
Total Device Dissipation @ TC = 25C
Derate above 25C
PD
1333
6.67
W
W/C
Operating Junction Temperature (1,2)
TJ
225
C
Symbol
Value (2,3)
Unit
Thermal Resistance, Junction to Case
CW: Case Temperature 63C, 1250 W CW, IDQ = 100 mA, 230 MHz
RJC
0.15
C/W
Thermal Impedance, Junction to Case
Pulse: Case Temperature 66C, 1250 W Pulse, 100 sec Pulse Width, 20% Duty Cycle,
IDQ = 100 mA, 230 MHz
ZJC
0.03
C/W
Table 2. Thermal Characteristics
Characteristic
Table 3. ESD Protection Characteristics
Test Methodology
Class
Human Body Model (per JESD22--A114)
2, passes 3500 V
Machine Model (per EIA/JESD22--A115)
B, passes 250 V
Charge Device Model (per JESD22--C101)
IV, passes 4000 V
Table 4. Electrical Characteristics (TA = 25C unless otherwise noted)
Characteristic
Symbol
Min
Typ
Max
Unit
IGSS
—
—
1
Adc
133
—
—
Vdc
Off Characteristics (4)
Gate--Source Leakage Current
(VGS = 5 Vdc, VDS = 0 Vdc)
Drain--Source Breakdown Voltage
(VGS = 0 Vdc, ID = 100 mA)
V(BR)DSS
Zero Gate Voltage Drain Leakage Current
(VDS = 50 Vdc, VGS = 0 Vdc)
IDSS
—
—
10
Adc
Zero Gate Voltage Drain Leakage Current
(VDS = 100 Vdc, VGS = 0 Vdc)
IDSS
—
—
20
Adc
Gate Threshold Voltage (4)
(VDS = 10 Vdc, ID = 1776 Adc)
VGS(th)
1.7
2.2
2.7
Vdc
Gate Quiescent Voltage
(VDD = 50 Vdc, ID = 100 mAdc, Measured in Functional Test)
VGS(Q)
1.9
2.2
2.9
Vdc
Drain--Source On--Voltage (4)
(VGS = 10 Vdc, ID = 2 Adc)
VDS(on)
—
0.15
—
Vdc
Forward Transconductance
(VDS = 10 Vdc, ID = 30 Adc)
gfs
—
28.0
—
S
Reverse Transfer Capacitance
(VDS = 50 Vdc  30 mV(rms)ac @ 1 MHz, VGS = 0 Vdc)
Crss
—
2.8
—
pF
Output Capacitance
(VDS = 50 Vdc  30 mV(rms)ac @ 1 MHz, VGS = 0 Vdc)
Coss
—
185
—
pF
Input Capacitance
(VDS = 50 Vdc, VGS = 0 Vdc  30 mV(rms)ac @ 1 MHz)
Ciss
—
562
—
pF
On Characteristics
Dynamic Characteristics (4)
1. Continuous use at maximum temperature will affect MTTF.
2. MTTF calculator available at http://www.freescale.com/rf. Select Software & Tools/Development Tools/Calculators to access MTTF
calculators by product.
3. Refer to AN1955, Thermal Measurement Methodology of RF Power Amplifiers. Go to http://www.freescale.com/rf.
Select Documentation/Application Notes -- AN1955.
4. Each side of device measured separately.
(continued)
MRFE6VP61K25HR6 MRFE6VP61K25HSR5 MRFE6VP61K25GSR5
2
RF Device Data
Freescale Semiconductor, Inc.
Table 4. Electrical Characteristics (TA = 25C unless otherwise noted) (continued)
Characteristic
Symbol
Min
Typ
Max
Unit
Functional Tests (1) (In Freescale Test Fixture, 50 ohm system) VDD = 50 Vdc, IDQ = 100 mA, Pout = 1250 W Peak (250 W Avg.),
f = 230 MHz, 100 sec Pulse Width, 20% Duty Cycle
Gps
23.0
24.0
Drain Efficiency
D
72.5
74.0
—
%
Input Return Loss
IRL
—
--14
--10
dB
Power Gain
26.0
dB
Table 5. Load Mismatch/Ruggedness (In Freescale Test Fixture, 50 ohm system) IDQ = 100 mA
Frequency
(MHz)
230
Signal Type
VSWR
Pout
(W)
Pulse
(100 sec, 20% Duty Cycle)
>65:1 at all
Phase Angles
1500 Peak
(3 dB Overdrive)
Test Voltage, VDD
Result
50
No Device Degradation
1. Measurements made with device in straight lead configuration before any lead forming operation is applied. Lead forming is used for gull
wing (GS) parts.
MRFE6VP61K25HR6 MRFE6VP61K25HSR5 MRFE6VP61K25GSR5
RF Device Data
Freescale Semiconductor, Inc.
3
--
C22
C13
C11 C12
--
C10
C23
C24
C21
COAX1
COAX3
R1
L3
C16
C3
L2
R2
COAX2
C17
C15
C14
C5
C18
CUT OUT AREA
C1
C2 C4
L1
C20
C19
L4
COAX4
C25
C6
C7 C8
C9
C26
MRFE6VP61K25H
Rev. 3
--
C27
--
C28
Figure 2. MRFE6VP61K25HR6(HSR6) 230 MHz Production Test Circuit Component Layout — Pulse
Table 6. MRFE6VP61K25HR6(HSR6) 230 MHz Production Test Circuit Component Designations and Values — Pulse
Part
Description
Part Number
Manufacturer
C1
20 pF Chip Capacitor
ATC100B200JT500XT
ATC
C2, C3, C5
27 pF Chip Capacitors
ATC100B270JT500XT
ATC
C4
0.8--8.0 pF Variable Capacitor, Gigatrim
27291SL
Johanson
C6, C10
22 F, 35 V Tantalum Capacitors
T491X226K035AT
Kemet
C7, C11
0.1 F Chip Capacitors
CDR33BX104AKYS
AVX
C8, C12
220 nF Chip Capacitors
C1812C224K5RACTU
Kemet
C9, C13, C21, C25
1000 pF Chip Capacitors
ATC100B102JT50XT
ATC
C14
43 pF Chip Capacitor
ATC100B430JT500XT
ATC
C15
75 pF Metal Mica
MIN02--002EC750J--F
CDE
C16, C17, C18, C19
240 pF Chip Capacitors
ATC100B241JT200XT
ATC
C20
6.2 pF Chip Capacitor
ATC100B6R2BT500XT
ATC
C22, C23, C24, C26, C27, C28
470 F, 63 V Electrolytic Capacitors
MCGPR63V477M13X26--RH
Multicomp
Coax1, 2, 3, 4
25  Semi Rigid Coax, 2.2 Shield Length
UT--141C--25
Micro--Coax
L1, L2
5 nH Inductors
A02TKLC
Coilcraft
L3, L4
6.6 nH Inductors
GA3093--ALC
Coilcraft
R1, R2
10  Chip Resistors
CRCW120610R0JNEA
Vishay
PCB
0.030, r = 2.55
AD255A
Arlon
MRFE6VP61K25HR6 MRFE6VP61K25HSR5 MRFE6VP61K25GSR5
4
RF Device Data
Freescale Semiconductor, Inc.
RF
INPUT
RF Device Data
Freescale Semiconductor, Inc.
C1
Z2
VBIAS
C3
Z6
Z10
Z8
+
C6
C8
C5
C4
C7
Z9
Z7
C12
C9
L2
L1
C13
R2
Z12
Z14
Z13
Z11
R1
DUT
Z16
Z15
L4
Z20
Z18
Z22
C14
Z21
Z17
Z19
L3
C25
Z24
Z23
C21
Z26
C15
Z25
+
C26
C19
C18
C17
C16
C27
0.175  0.082 Microstrip
0.170  0.100 Microstrip
0.116  0.285 Microstrip
0.116  0.285 Microstrip
0.108  0.285 Microstrip
Z2
Z3, Z4
Z5, Z6
Z7, Z8
Z9, Z10
Description
0.192  0.082 Microstrip
Z1
Microstrip
Z28
Z27
C24
C23
C22
+
C28
VSUPPLY
COAX4
COAX3
VSUPPLY
Microstrip
Z21, Z22
Z19*, Z20*
Z17*, Z18*
Z15, Z16
Z13, Z14
Z11*, Z12*
Description
0.104  0.507 Microstrip
0.187  0.154 Microstrip
0.466  0.363 Microstrip
0.371  0.507 Microstrip
0.412  0.726 Microstrip
0.872  0.058 Microstrip
Microstrip
0.179  0.082 Microstrip
0.186  0.082 Microstrip
0.116  0.300 Microstrip
0.127  0.300 Microstrip
1.251  0.300 Microstrip
Z29
* Line length includes microstrip bends
Z30
Z29
Z27, Z28
Z25, Z26
Z23, Z24
Description
Figure 3. MRFE6VP61K25HR6(HSR6) 230 MHz Production Test Circuit Schematic — Pulse
COAX2
Z4
C2
Z5
C11
+
Z3
C10
+
+
Table 7. MRFE6VP61K25HR6(HSR6) 230 MHz Production Test Circuit Microstrips — Pulse
Z1
COAX1
VBIAS
+
MRFE6VP61K25HR6 MRFE6VP61K25HSR5 MRFE6VP61K25GSR5
5
C20
RF
Z30 OUTPUT
TYPICAL CHARACTERISTICS
66
2000
Ciss
Pout, OUTPUT POWER (dBm) PULSED
C, CAPACITANCE (pF)
1000
Coss
100
10
Crss
1
Measured with 30 mV(rms)ac @ 1 MHz
VGS = 0 Vdc
0
10
20
30
P2dB = 61.7 dBm (1472 W)
64
63
P1dB = 61.3 dBm
(1333 W)
62
Actual
61
VDD = 50 Vdc, IDQ = 100 mA, f = 230 MHz
Pulse Width = 100 sec, 20% Duty Cycle
60
59
35
50
40
Ideal
P3dB = 61.9 dBm (1553 W)
65
36
37
38
39
40
41
42
VDS, DRAIN--SOURCE VOLTAGE (VOLTS)
Pin, INPUT POWER (dBm) PEAK
Note: Each side of device measured separately.
Figure 5. Output Power versus Input Power
Figure 4. Capacitance versus Drain--Source Voltage
80
70
23
60
Gps
22
50
21
40
24
Gps, POWER GAIN (dB)
24
35 V
VDD = 30 V
0
200
400
600
800
1000
1200
1400
1600
Pout, OUTPUT POWER (WATTS) PEAK
Figure 6. Power Gain and Drain Efficiency
versus Output Power
Figure 7. Power Gain versus Output Power
26
35 V
VDD = 30 V
40 V
45 V
50 V
Gps, POWER GAIN (dB)
60
50
40
200
400
600
800
1000
1200
1400
24
23
25_C
1600
50
85_C
21
Pout, OUTPUT POWER (WATTS) PEAK
Figure 8. Drain Efficiency versus Output Power
80
60
22 Gps
19
100
90
85_C 70
TC = --30_C
20
IDQ = 100 mA, f = 230 MHz
Pulse Width = 100 sec, 20% Duty Cycle
30
--30_C
25_C
25
70
0
45 V
40 V
19
Pout, OUTPUT POWER (WATTS) PEAK
80
D, DRAIN EFFICIENCY (%)
20
16
90
20
50 V
21
17
30
2000
1000
23
22
18
D
20
100
IDQ = 100 mA, f = 230 MHz
Pulse Width = 100 sec, 20% Duty Cycle
25
D, DRAIN EFFICIENCY (%)
25
Gps, POWER GAIN (dB)
26
90
VDD = 50 Vdc, IDQ = 100 mA, f = 230 MHz
Pulse Width = 100 sec, 20% Duty Cycle
D
40
VDD = 50 Vdc, IDQ = 100 mA, f = 230 MHz
Pulse Width = 100 sec, 20% Duty Cycle
1000
D, DRAIN EFFICIENCY (%)
26
30
20
2000
Pout, OUTPUT POWER (WATTS) PEAK
Figure 9. Power Gain and Drain Efficiency versus
Output Power
MRFE6VP61K25HR6 MRFE6VP61K25HSR5 MRFE6VP61K25GSR5
6
RF Device Data
Freescale Semiconductor, Inc.
TYPICAL CHARACTERISTICS
109
MTTF (HOURS)
108
107
106
105
104
90
110
130
150
170
190
210
230
250
TJ, JUNCTION TEMPERATURE (C)
This above graph displays calculated MTTF in hours when the device
is operated at VDD = 50 Vdc, Pout = 1250 W CW, and D = 74.6%.
MTTF calculator available at http://www.freescale.com/rf. Select
Software & Tools/Development Tools/Calculators to access MTTF
calculators by product.
Figure 10. MTTF versus Junction Temperature — CW
VDD = 50 Vdc, IDQ = 100 mA, Pout = 1250 W Peak
f
MHz
Zsource

Zload

230
1.29 + j3.54
2.12 + j2.68
Zsource = Test circuit impedance as measured from
gate to gate, balanced configuration.
Zload
50 
Input
Matching
Network
= Test circuit impedance as measured from
drain to drain, balanced configuration.
Device
Under
Test
+
-Zsource
--
Output
Matching
Network
50 
+
Zload
Figure 11. Series Equivalent Test Circuit Source and Load Impedance — 230 MHz Pulse
MRFE6VP61K25HR6 MRFE6VP61K25HSR5 MRFE6VP61K25GSR5
RF Device Data
Freescale Semiconductor, Inc.
7
VDD = 50 Vdc, IDQ = 100 mA
f
(MHz)
Zsource
()
Zload
()
1.8 (1)
34.4 + j192.0 (1)
5.00 - j4.00 (1)
27
12.5 + j7.00
7.00 + j0.70
40
5.75 + j5.06
5.39 + j2.62
81.36
4.04 + j5.93
4.89 + j2.95
88
2.20 + j6.70
4.90 + j2.90
98
2.30 + j6.90
4.10 + j2.50
108
2.30 + j7.00
4.40 + j3.60
144
1.60 + j5.00
3.90 + j1.50
175
1.33 + j3.90
3.50 + j2.50
230
1.29 + j3.54
2.12 + j2.68
352
0.98 + j1.45
1.82 + j2.05
500
0.29 + j1.47
1.79 + j1.80
1. Simulated data.
Zsource = Test circuit impedance as measured from
gate to gate, balanced configuration.
Zload
50 
Input
Matching
Network
= Test circuit impedance as measured from
drain to drain, balanced configuration.
+
Device
Under
Test
-Zsource
--
Output
Matching
Network
50 
+
Zload
Figure 12. Source and Load Impedances Optimized for IRL, Power and Efficiency — Push--Pull
MRFE6VP61K25HR6 MRFE6VP61K25HSR5 MRFE6VP61K25GSR5
8
RF Device Data
Freescale Semiconductor, Inc.
87.5--108 MHz FM BROADCAST REFERENCE CIRCUIT
COAX1
C15
C16
C1
C19
C18
+
+
C17
B1
L2
R1
L1
COAX3
L4
C3
C7
C8
C9
C4
T1
C10
C11
L3
C2
C24
Q1
MRFE6VP61K25H Rev. 1
C22
C5
C12
L5
+
+
C21
C20
C23
Note: Component numbers C6, C13 and
C14 are not used.
COAX2
Figure 13. MRFE6VP61K25HR6(HSR6) 87.5--108 MHz FM Broadcast Reference Circuit Component Layout
Table 8. MRFE6VP61K25HR6(HSR6) 87.5--108 MHz FM Broadcast Reference Circuit Component Designations
and Values
Part
Description
Part Number
Manufacturer
B1
Long Ferrite Bead
2743021447
Fair--Rite
C1
6.8 F, 50 V Chip Capacitor
C4532X7R1H685K
TDK
C2
27 pF Chip Capacitor
ATC100B270JT500XT
ATC
C3, C7, C8, C9, C10,
C11, C12
1000 pF Chip Capacitors
ATC100B102JT50XT
ATC
C4
39 pF Mica Capacitor
MIN02--002DC390J--F
Cornell Dubilier
C5
3 pF Chip Capacitor
ATC100B3R0CT500XT
ATC
C15, C22
10K pF Chip Capacitors
ATC200B103KT50XT
ATC
C16, C23
1 F, 100 V Chip Capacitors
C3225JB2A105KT
TDK
C17, C24
10 F, 100 V Chip Capacitors
C5750X7S2A106MT
TDK
C18, C19, C20, C21
470 F, 63 V Electrolytic Capacitors
MCGPR63V477M13X26--RH
Multicomp
L1
39 nH Inductor
1812SMS--39NJLC
Coilcraft
L2, L3
2.5 nH Inductors
A01TKLC
Coilcraft
L4, L5
7 Turn, #16 AWG, ID = 0.3 Inductors
Copper Wire
Q1
RF Power LDMOS Transistor
MRFE6VP61K25HR6
Freescale
R1
11 , 1/4 W Chip Resistor
CRCW120611R0FKEA
Vishay
T1
Balun
TUI--9
Comm Concepts
Coax1, Coax2
Flex Cables (12 ) 5.9
TC--12
Comm Concepts
Coax3
Coax Cable, Quickform 50 , 8.7
SUCOFORM 250--01
Huber+Suhner
PCB
0.030, r = 3.5
TC--350
Arlon
Heatsink
NI--1230 Copper Heatsink
C193X280T970
Machine Shop
MRFE6VP61K25HR6 MRFE6VP61K25HSR5 MRFE6VP61K25GSR5
RF Device Data
Freescale Semiconductor, Inc.
9
10
L1
B1
R1
C2
C3
L3
L2
B3
C4
C22
COAX2
COAX1
C23
C16
C24
C17
C12
C11
C10
C9
C8
C7
C18
C19
+
C21
C20
+
VDD
VDD
COAX3
Figure 14. MRFE6VP61K25HR6(HSR6) 87.5--108 MHz FM Broadcast Reference Circuit Schematic
T1
B2
C15
+
RF
INPUT
VGS
C1
+
MRFE6VP61K25HR6 MRFE6VP61K25HSR5 MRFE6VP61K25GSR5
RF Device Data
Freescale Semiconductor, Inc.
C5
RF
OUTPUT
TYPICAL CHARACTERISTICS — 87.5--108 MHz FM BROADCAST REFERENCE CIRCUIT
30
108 MHz
90
98 MHz
Gps, POWER GAIN (dB)
87.5 MHz
28
70
Gps
27
60
26
50
25
108 MHz
98 MHz
24
D
30
VDD = 50 Vdc, IDQ = 200 mA
87.5 MHz
23
40
40
100
D, DRAIN EFFICIENCY (%)
80
29
20
2000
1000
Pout, OUTPUT POWER (WATTS)
Figure 15. Power Gain and Drain Efficiency
versus Output Power
VDD = 50 Vdc, IDQ = 200 mA, Pout = 1100 W CW
f
MHz
Zsource

Zload

87.5
2.20 + j6.70
4.90 + j2.90
98
2.30 + j6.90
4.10 + j2.50
108
2.30 + j7.00
4.40 + j3.60
Zsource = Test circuit impedance as measured from
gate to gate, balanced configuration.
Zload
50 
Input
Matching
Network
= Test circuit impedance as measured from
drain to drain, balanced configuration.
+
-Zsource
Device
Under
Test
--
Output
Matching
Network
50 
+
Zload
Figure 16. Series Equivalent 87.5--108 MHz FM Broadcast Reference Circuit Source and Load Impedance
MRFE6VP61K25HR6 MRFE6VP61K25HSR5 MRFE6VP61K25GSR5
RF Device Data
Freescale Semiconductor, Inc.
11
144--148 MHz REFERENCE CIRCUIT
COAX1
C15 C16 C17
C1
+
C18
COAX3
B1
C3
L2
R1
C19
C20
T1
L1
C7
C8
C9
C4
C10
C11
C5
C6
C12
C14
C13
MRFE6VP61K25H Rev. 2
*C7, C8, C9, C10, C11, and C12 are mounted vertically.
Note: Component number C2 is not used.
COAX2
Figure 17. MRFE6VP61K25HR6(HSR6) 144--148 MHz Reference Circuit Component Layout
Table 9. MRFE6VP61K25HR6(HSR6) 144--148 MHz Reference Circuit Component Designations and Values
Part
Description
Part Number
Manufacturer
B1
95 , 100 MHz Long Ferrite Bead
2743021447
Fair--Rite
C1
6.8 F, 50 V Chip Capacitor
C4532X7R1H685K
TDK
C3, C5, C7, C8, C9, C10,
C11, C12, C13, C15
1000 pF Chip Capacitors
ATC100B102KT50XT
ATC
C4
5.6 pF Chip Capacitor
ATC100B5R6CT500XT
ATC
C6
470 pF Chip Capacitor
ATC100B471JT200XT
ATC
C14, C16
1 F, 100 V Chip Capacitors
C3225JB2A105KT
TDK
C17
2.2 F, 100 V Chip Capacitor
HMK432B7225KM--T
Taiyo Yuden
C18
470 F, 100 V Electrolytic Capacitor
MCGPR100V477M16X32--RH
Multicomp
C19, C20
15 pF Chip Capacitors
ATC100B150JT500XT
ATC
L1
43 nH Inductor
B10TJLC
Coilcraft
L2
7 Turn, #14 AWG, ID = 0.4 Inductor
Handwound
Freescale
R1
11 , 1/4 W Chip Resistor
CRCW120611R0FKEA
Vishay
T1
Balun
TUI--9
Comm Concepts
Coax1, Coax2
Flex Cables, 10.2 , 4.7
TC--12
Comm Concepts
Coax3
Coax Cable, 50 , 6.7
SUCOFORM250--01
Huber+Suhner
PCB
0.030”, r = 3.50
TC--350
Arlon
MRFE6VP61K25HR6 MRFE6VP61K25HSR5 MRFE6VP61K25GSR5
12
RF Device Data
Freescale Semiconductor, Inc.
RF Device Data
Freescale Semiconductor, Inc.
VGS
RF
INPUT
C1
L1
B1
R1
C2
C3
COAX2
COAX1
C6
C5
L2
C13
C19 C20
COAX3
C15 C16 C17
C14
C12
C11
C10
C9
C7
C8
Figure 18. MRFE6VP61K25HR6(HSR6) 144--148 MHz Reference Circuit Schematic
T1
C18
+
MRFE6VP61K25HR6 MRFE6VP61K25HSR5 MRFE6VP61K25GSR5
13
VDD
C4
RF
OUTPUT
TYPICAL CHARACTERISTICS — 144--148 MHz REFERENCE CIRCUIT
VDD = 50 Vdc, IDQ = 200 mA, Pout = 1100 W CW
f
MHz
Zsource

Zload

144
1.6 + j5.0
3.9 + j1.5
Zsource = Test circuit impedance as measured from
gate to gate, balanced configuration.
= Test circuit impedance as measured from
drain to drain, balanced configuration.
Zload
Input
Matching
Network
50 
+
Device
Under
Test
Output
Matching
Network
--
-Zsource
50 
+
Zload
Figure 19. Series Equivalent 144--148 MHz Reference Circuit Source and Load Impedance
31
90
VDD = 50 Vdc, IDQ = 2500 mA, f = 144 MHz
29
80
70
Gps
28
60
27
50
26
40
D
25
D, DRAIN EFFICIENCY (%)
Gps, POWER GAIN (dB)
30
30
24
50
100
20
2000
1000
Pout, OUTPUT POWER (WATTS)
Figure 20. Power Gain and Drain Efficiency
versus Output Power
IMD, INTERMODULATION DISTORTION (dBc)
0
VDD = 50 Vdc
f1 = 143.9 MHz, f2 = 144.1 MHz
Two--Tone Measurement
--20
--20
--30
IDQ = 2500 mA
--40
--50
4500 mA
3rd Order
--60
--70
3rd Order
7th Order
--80
4500 mA
--90
5th Order
7th Order
--100
1
10
100
1000 2000
Pout, OUTPUT POWER (WATTS) PEP
Figure 21. Intermodulation Distortion Products
versus Output Power
MRFE6VP61K25HR6 MRFE6VP61K25HSR5 MRFE6VP61K25GSR5
14
RF Device Data
Freescale Semiconductor, Inc.
HARMONIC MEASUREMENTS
Ref Lvl
1.5 E 04 W
Marker 1 [T1]
1.018 kW
144.00000000 MHz
RBW
VBW
SWT
77.7 dB Offset
1
3 MHz
3 MHz
5 ms
RF Att
B1 [T1]
1.018 kW A
144.00000000 MHz
--42.07 dB
144.00501002 MHz
--32.87 dB
288.00501002 MHz
--37.26 dB
432.00501002 MHz 1SA
--38.89 dB
576.00501002 MHz
1 [T1]
2 [T1]
3 [T1]
1 VIEW
4 [T1]
2
3
1
Center 525 MHz
95 MHz/
Unit
10 dB
W
EXT
4
144 MHz, 1 kW
H2
H3
H4
H5
--42 dB
--33 dB
--37 dB
--39 dB
Span 950 MHz
Figure 22. 144 MHz Harmonics @ 1 kW
MRFE6VP61K25HR6 MRFE6VP61K25HSR5 MRFE6VP61K25GSR5
RF Device Data
Freescale Semiconductor, Inc.
15
PACKAGE DIMENSIONS
MRFE6VP61K25HR6 MRFE6VP61K25HSR5 MRFE6VP61K25GSR5
16
RF Device Data
Freescale Semiconductor, Inc.
MRFE6VP61K25HR6 MRFE6VP61K25HSR5 MRFE6VP61K25GSR5
RF Device Data
Freescale Semiconductor, Inc.
17
MRFE6VP61K25HR6 MRFE6VP61K25HSR5 MRFE6VP61K25GSR5
18
RF Device Data
Freescale Semiconductor, Inc.
MRFE6VP61K25HR6 MRFE6VP61K25HSR5 MRFE6VP61K25GSR5
RF Device Data
Freescale Semiconductor, Inc.
19
MRFE6VP61K25HR6 MRFE6VP61K25HSR5 MRFE6VP61K25GSR5
20
RF Device Data
Freescale Semiconductor, Inc.
MRFE6VP61K25HR6 MRFE6VP61K25HSR5 MRFE6VP61K25GSR5
RF Device Data
Freescale Semiconductor, Inc.
21
PRODUCT DOCUMENTATION AND SOFTWARE
Refer to the following documents and software to aid your design process.
Application Notes
 AN1955: Thermal Measurement Methodology of RF Power Amplifiers
Engineering Bulletins
 EB212: Using Data Sheet Impedances for RF LDMOS Devices
Software
 Electromigration MTTF Calculator
 RF High Power Model
 .s2p File
For Software, do a Part Number search at http://www.freescale.com, and select the “Part Number” link. Go to the
Software & Tools tab on the part’s Product Summary page to download the respective tool.
REVISION HISTORY
The following table summarizes revisions to this document.
Revision
Date
Description
0
Nov. 2010
 Initial Release of Data Sheet
1
Jan. 2011
 Fig. 1, Pin Connections, corrected pin 4 label from RFout/VGS to RFin/VGS, p. 1
2
May 2012
 Added Application Circuits Typical Performance table, p. 1
 Capable of Handling VSWR bullet: corrected 1250 Peak Output Power value to 1500 and converted to table,
p. 1, 3
 Table 1, Max Ratings: final DC test specification for Drain--Source Voltage changed from +125 to +133 Vdc,
p. 2
 Table 3, ESD Protection Characteristics: added the device’s ESD passing level as applicable to each ESD
class, p. 2
 Table 4, Off Characteristics: final DC test specification for Drain--Source Breakdown Voltage minimum value
changed from 125 to 133 Vdc, p. 2
 Table 4, On Characteristics: added Forward Transconductance, p. 2
 Fig. 10, MTTF versus Junction Temperature -- CW: MTTF end temperature on graph changed to match
maximum operating junction temperature, p. 7
 Added Fig. 12, Source and Load Impedances Optimized for IRL, Power and Efficiency — Push--pull, p. 8
 Added Fig. 13, 87.5--108 MHz FM Broadcast Reference Circuit Component Layout, p. 9
 Added Table 9, 87.5--108 MHz FM Broadcast Reference Circuit Component Designations and Values, p. 9
 Added Fig. 14, 87.5--108 MHz FM Broadband Reference Circuit Schematic, p. 10
 Added Fig. 15, Power Gain and Drain Efficiency versus Output Power (87.5--108 MHz), p. 11
 Added Fig. 16, Series Equivalent 87.5--108 MHz FM Broadcast Reference Circuit Source and Load
Impedance, p. 11
 Added Fig. 17, 144--148 MHz Reference Circuit Component Layout, p. 12
 Added Table 9, 144--148 MHz Reference Circuit Component Designations and Values, p. 12
 Added Fig. 18, 144--148 MHz Reference Circuit Schematic, p. 13
 Added Fig. 19, Series Equivalent 144--148 MHz Reference Circuit Source and Load Impedance, p. 14
 Added Fig. 20, Power Gain and Drain Efficiency versus Output Power (144--148 MHz), p. 14
 Added Fig. 21, Intermodulation Distortion Products versus Output Power (144--148 MHz), p. 14
 Added Fig. 22, 144 MHz Harmonics @ 1 kW, p. 15
3
Oct. 2012
 Added part number MRFE6VP61K25GSR5, p. 1
 Added 2282--02 (NI--1230S--4 Gull) package isometric, p. 1, and Mechanical Outline, p. 20, 21
4
Mar. 2013
 MRFE6VP61K25HR6 tape and reel option replaced with MRF6VP61K25HR5 per PCN15551.
 Replaced Case Outline 98ASB16977C, Issue E with Issue F, p. 16, 17. Changed dimension C from
0.150--0.200 to CC 0.170--0.190.
 Replaced Case Outline 98ARB18247C, Issue F with Issue G, p. 18, 19. Changed dimension C from
0.150--0.200 to CC 0.170--0.190. Added minimum Z dimension R0.00.
 Replaced Case Outline 98ASA00459D, Issue O with Issue A, p. 20, 21. Changed dimension C from
0.150--0.200 to CC 0.170--0.190. Corrected positional tolerance for dimension S.
MRFE6VP61K25HR6 MRFE6VP61K25HSR5 MRFE6VP61K25GSR5
22
RF Device Data
Freescale Semiconductor, Inc.
How to Reach Us:
Home Page:
freescale.com
Web Support:
freescale.com/support
Information in this document is provided solely to enable system and software
implementers to use Freescale products. There are no express or implied copyright
licenses granted hereunder to design or fabricate any integrated circuits based on the
information in this document.
Freescale reserves the right to make changes without further notice to any products
herein. Freescale makes no warranty, representation, or guarantee regarding the
suitability of its products for any particular purpose, nor does Freescale assume any
liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation consequential or incidental
damages. “Typical” parameters that may be provided in Freescale data sheets and/or
specifications can and do vary in different applications, and actual performance may
vary over time. All operating parameters, including “typicals,” must be validated for
each customer application by customer’s technical experts. Freescale does not convey
any license under its patent rights nor the rights of others. Freescale sells products
pursuant to standard terms and conditions of sale, which can be found at the following
address: freescale.com/SalesTermsandConditions.
Freescale, the Freescale logo, AltiVec, C--5, CodeTest, CodeWarrior, ColdFire,
C--Ware, Energy Efficient Solutions logo, Kinetis, mobileGT, PowerQUICC, Processor
Expert, QorIQ, Qorivva, StarCore, Symphony, and VortiQa are trademarks of
Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. Airfast, BeeKit, BeeStack,
ColdFire+, CoreNet, Flexis, MagniV, MXC, Platform in a Package, QorIQ Qonverge,
QUICC Engine, Ready Play, SafeAssure, SMARTMOS, TurboLink, Vybrid, and Xtrinsic
are trademarks of Freescale Semiconductor, Inc. All other product or service names
are the property of their respective owners.
E 2010--2013 Freescale Semiconductor, Inc.
MRFE6VP61K25HR6 MRFE6VP61K25HSR5 MRFE6VP61K25GSR5
Document
Number:
RF
Device
Data MRFE6VP61K25H
Rev. 4, 3/2013
Freescale
Semiconductor, Inc.
23
Similar pages