MSH Series – 3.2 X 2.5 Ceramic SMD Oscillator ¾ Low Profile SMD Device ¾ Hermetically Sealed ¾ Tri-state Function ¾ Wide Frequency Range ELECTRICAL SPECIFICATIONS: Frequency Range Temperature Stability* Aging (+25°C ±3°C) Operating Temperature Range Storage Temperature Range Supply Voltage (±10%) 1.544MHZ to 9.999MHZ 10.000MHZ to 35.999MHZ 35.000MHZ to 49.999MHZ 50.000MHZ to 125.000MHZ Supply Current Output Type Symmetry (50% of waveform) Rise/Fall Time (10% to 90% of Supply Voltage) Load Start-up Time * Inclusive of Temperature., Load, Voltage and Aging 1.544MHZ to 70.000MHZ 1.544MHZ to 110.000MHZ (See Part Number Guide for Options) ±5ppm First Year (See Part Number Guide for Options) -55°C to +125°C +1.80VDC +2.50VDC +3.30VDC 10mA max 12mA max 14mA max 12mA max 14mA max 16mA max 15mA max 20mA max 25mA max 25mA max 30mA max 35mA max HCMOS 40%/60% (45%/55% Option) 5nSEC 6nSEC 7nSEC 15pF 2 mSec max MECHANICAL DIMENSIONS: 3.40 [.134] MAX 1.30 [.051] MAX 2.10 [.083] 2.10 [.083] 3 4 2 1 2.70 [.106] MAX 1.60 [.063] 0.90 [.035] 1.00 [.039] 1.10 [.043] DIMENSIONS IN BRACKETS ARE IN INCHES EXTERNAL BYPASS CAPACITOR IS RECOMMENDED 1.60 [.063] 1.20 [.047] RECOMMENDED LAND PATTERN PIN CONNECTIONS PIN 1 TRI-STATE CASE GROUND PIN 2 PIN 3 OUTPUT PIN 4 SUPPLY VOLTAGE TRI-STATE OPERATION PIN 1 PIN 3 LOGIC "1" OSCILLATION OR N/C LOGIC "0" OR GRD HIGH IMPEDANCE PART NUMBER GUIDE: MS Frequency H 3.2 x2.5 Ceramic SMD 4 Pads Supply Voltage Output H = HCMOS 3 = +3.3VDC 2 = +2.5VDC 1 = +1.8VDC Symmetry Blank = 40/60% A = 45/55% Frequency Stability 025 = ±25 ppm 050 = ±50 ppm 100 = ±100 ppm Operating Temperature Blank = 0°C to +70°C 27 = -20°C to +70°C 48 = -40°C to +85°C Pin 1 Connection H = Tri-state S = Standby Value Added Options Blank = No Added Options T = Tape and Reel MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Specifications subject to change without notice Revision 12/18/06 D