Document 281-1 SMT Power Inductors - MSS1260 Series The MSS1260 Series provides high inductance and high efficiency in a low profile, low cost part. The magnetic shielding and small footprint of these inductors allows high density mounting. The flat top ensures reliable pick and place handling. They’re ideal for use in DC-DC converters, LCD panels, and portable devices where low cost and high reliabilty are critical. In addition to the standard values shown, Coilcraft can custom-engineer versions to meet specific applications. Free evaluation samples are available by contacting Coilcraft or on the web at www.coilcraft.com. Part number1 2 2 L (µH) MSS1260-102NX_ MSS1260-152NX_ MSS1260-222NX_ MSS1260-332NX_ MSS1260-472MX_ MSS1260-562MX_ MSS1260-682MX_ MSS1260-822MX_ MSS1260-103MX_ MSS1260-123MX_ MSS1260-153MX_ MSS1260-183MX_ MSS1260-223MX_ MSS1260-273MX_ MSS1260-333MX_ MSS1260-393MX_ MSS1260-473MX_ MSS1260-563MX_ MSS1260-683MX_ MSS1260-823MX_ MSS1260-104MX_ MSS1260-124KX_ MSS1260-154KX_ MSS1260-184KX_ MSS1260-224KX_ MSS1260-274KX_ MSS1260-334KX_ MSS1260-394KX_ MSS1260-474KX_ MSS1260-564KX_ MSS1260-684KX_ MSS1260-824KX_ MSS1260-105KX_ 1.0 ±30% 1.5 2.2 3.3 4.7 ±20% 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 ±10% 150 180 220 270 330 390 470 560 680 820 1000 0.484 max 12,3 Irms DCR 3SRF3 20°C 40°C max typ 4Isat4 rise rise ⏲ ) (MHz) (A) (⏲ (A) (A) 0.010 100.0 10.00 0.013 80.0 8.50 0.014 55.0 7.50 0.016 42.0 6.50 0.020 33.0 5.80 0.022 30.0 5.30 0.023 27.0 4.90 0.025 26.0 4.40 0.028 22.0 4.00 0.032 20.0 3.60 0.040 18.0 3.30 0.045 16.0 3.00 0.052 15.0 2.70 0.065 13.0 2.40 0.075 12.4 2.20 0.080 12.0 2.00 0.100 11.6 1.85 0.120 10.5 1.70 0.130 10.0 1.55 0.160 8.6 1.40 0.190 7.8 1.25 0.250 6.8 1.15 0.280 6.4 1.00 0.320 6.1 0.95 0.420 5.5 0.85 0.480 4.3 0.75 0.630 4.0 0.70 0.700 3.6 0.65 0.900 3.0 0.58 1.000 2.8 0.53 1.200 2.6 0.48 1.600 2.5 0.44 1.850 2.4 0.40 6.00 6.00 5.50 5.00 4.50 4.00 3.80 3.40 3.00 2.80 2.60 2.50 2.30 2.10 2.00 1.90 1.85 1.75 1.70 1.60 1.50 1.38 1.20 1.14 1.00 0.90 0.84 0.78 0.70 0.64 0.58 0.53 0.48 8.00 7.50 7.00 7.00 7.00 6.40 5.90 4.80 4.00 3.70 3.50 3.30 3.10 2.90 2.70 2.60 2.50 2.40 2.30 2.20 2.10 1.85 1.66 1.58 1.42 1.45 1.16 1.08 0.96 0.88 0.80 0.73 0.68 XXX 0.484 max 12,3 0.24 ±0.01 6,0 ±0,2 0.217 5,5 0.197 5,0 0.197 5,0 0.177 4,5 0.138 3,5 0.157 4,0 Recommended Land Pattern Parts/reel: 13″ 500 Tape width: 24 mm For packaging data see Tape and Reel Specifications section. 1. When ordering, please specify packaging code: MSS1260-184KX _ Packaging code: D = 13″ machine-ready reel EIA-481 embossed plastic tape (500 per full reel). B = Less than full reel In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc on Agilent/HP 4284A LC meter or equivalent. 3. SRF measured using Agilent/HP 4191A or equilvalent. 4. DC current at which the inductance drops 10% (typ) from its value without current. 5. Operating temperature range -40°C to +85°C. 6. Electrical specifications at 25°C. See Qualification Standards section for environmental and test data. Specifications subject to change without notice. Document 281-1 Revised 11/04/02 Document 281-2 SMT Power Inductors - MSS1260 Series Typical L vs Frequency Typical L vs Current Specifications subject to change without notice. Document 281-2 Revised 5/17/02