MMD MTJH Mtjh, mtjs, & mtjz series tcxo Datasheet

MTJH, MTJS, & MTJZ SERIES TCXO
 11.7 X 9.6 SMD Package
 Voltage Control Option
 Wide Frequency Range
 RoHS Compliant Available
HCMOS
Output
Frequency Range
Load
Supply Current
Clipped Sinewave
Sinewave
9.600MHZ to 50.000MHZ
10k Ohms // 15pF
10k Ohms // 15pF
50 Ohms
35mA max
3mA max
25mA max
Logic “1” = 90% of Vdd min
1.0V p-p min
7 dBm
Logic “0” = 10% of Vdd max
See Part Numbering Guide
N/A
N/A
(See Frequency Stability vs Temperature Table)
±1 ppm per year max
±0.3 ppm with a 5% change in Vdd
±0.3 ppm with a 10% change in Load
(See Frequency Stability vs Temperature Table)
-40°C to +85°C
+3.3VDC ±5%
+5.0VDC ±5%
+1.65VDC ±1.50VDC Positive Slope
+2.50VDC ±2.00VDC Positive Slope
Output Level
Symmetry
Freq. Stability vs Temp (Note 1)
Freq. Stability vs Aging
Freq. Stability vs Voltage
Freq. Stability vs Load
Operating Range
Storage Temperature
Supply Voltage (Vdd)
Control Voltage with VC option
Pin 1 Connection
No Connection
VC Option
No Connection
±10 ppm min
Note 1: Oscillator frequency shall be ±1 ppm at +25°C ±3°C at time of shipment.
Phase Noise
Marking Detail
Line 1 = MXXXXX
M
XXXXX
Line 2 = SYYWWL
S
YYWW
L
= MMD
= Frequency in MHZ
= Internal Code
=
4 Digit Date Code
(Year / Week)
Envir & Mech Detail
Shock
MIL-STD-883,
Method 2002,
Condition B
Solderability
MIL-STD-883,
Method 2003
Vibration
MIL-STD-883,
Method 2007,
Condition A
= Denotes RoHS Compliant
Line 3 = XXXXX
Internal use only
May vary with lots
Black dot to denote Pin 1
MMD Monitor/Quartztek
30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
[email protected]
Revision:
Revisions only with customer approval
MTCH011311L
Pg 1 of 2
Part Number Guide
MT
Frequency
J
9.6 x 11.7 SMD
Packaging
Blank = Bulk
T = Tape and Reel
Series Option
J = J series (w/o trimmer)
Output
H = HCMOS
S = Clipped Sinewave
Z = Sinewave
Supply Voltage
5 = +5 VDC
3 = +3.3 VDC
2 = +2.5 VDC
RoHS Compliant
Blank = Not Compliant
F = is Compliant
Height Option
A = 3.00 [.118] max
B = 5.00 [.197] max
Frequency
Stability
= ±1.0 ppm
= ±1.5 ppm
= ±2.0 ppm
= ±2.5 ppm
= ±3.0 ppm
= ±5.0 ppm
Operating
Temperature
A = 0°C to +50°C
C = -20°C to +70°C
D = -30°C to +70°C
E = -30°C to +80°C
F = -40°C to +85°C
G = 0°C to +70°C
10
15
20
25
30
50
Pin 1 Connection
Blank = No Connect
V = Voltage Control
Symmetry
Blank = 40/60%
A = 45/55%
Please Consult with MMD Sales Department for any other Parameters or Options
Frequency Stability vs Temperature Table
Stability
10
Temp
±1.0ppm
0°C TO +50°C
●
0°C TO +70°C
-20°C TO +70°C
-30°C TO +70°C
-40°C TO +85°C
● = Available
Code
A
G
C
D
F
15
±1.5ppm
●
●
20
±2.0ppm
●
●
●
25
30
50
±2.5ppm
±3.0ppm
±5.0ppm
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
= Consult with the Manufacturer
Tape & Reel Dimensions
Mechanical Details
A = 3.00 [.118] MAX
B = 5.00 [.197] MAX
9.61 [.378]
MAX
7.00 [.276]
MXXXXX
SYYWWL
XXXXX
PITCH
Tape Width
7
8
11.70 [0.461]
MAX
7.62 [.300]
1
14
1.20 [.047]
TRIMMER ACCESS
Q1 Q2
Q1 Q2
Q3 Q4
Q3 Q4
PITCH
TAPE WIDTH
REEL DIA
PIN 1 ORIENT.
REEL DIA
12.00 [.471]
24.00 [.945]
330 [13.0]
Q1
1.40 [.055]
DIMENSION IN BRACKETS ARE IN INCHES
EXTERNAL BYPASS CAPACITOR IS RECOMMENDED
UNIT IS NOT HERMETICALLY SEALED
DIRECTION OF FEED
8.26 [.325]
NOTES: UNLESS OTHERWISE SPECIFIED
1. Applicable Standards / Specifications
ANSI Y14.5M, Dimensions and Tolerances
EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm
Punched Carrier Taping of Surface Mount Components for Automatic Handling.
2. Dimensions are in millimeters [inch].
3. Tolerances are ±0.1 [.004] mm unless otherwise specified.
4. Do not scale drawing.
PIN CONNECTIONS
7.62 [.300]
PIN 1
VOLTAGE CONTROL
OR NO CONNECTION
PIN 7
PIN 8
PIN 14
CASE GROUND
OUTPUT
SUPPLY VOLTAGE
2.54 [.100]
2.54 [.100]
MMD Monitor/Quartztek
30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
[email protected]
Revision:
Revisions only with customer approval
MTCH011311L
Pg 2 of 2
Similar pages