SOLID STATE LED LAMP RECTANGULAR 2 X 5 mm LED LAMPS MV52123 AlGaAs Red MV57123 HER MV53123 Yellow MV5B123 Blue MV54123 Green PACKAGE DIMENSIONS 0.205 (5.2) 0.189 (4.8) 0.085 (2.2) 0.071 (1.8) 0.307 (7.8) 0.283 (7.2) (anode) 1.039 (26.4) MIN 0.040 (1.0) 0.100 (2.54) 0.020 (0.5) NOTES: 1. Dimensions for all drawings are in inches (mm). 2. Lead spacing is measured where the leads emerge from the package. 3. Protruded resin under the flange is 1.5 mm (0.059") max. 4. Tolerance is ±0.12" (0.3 mm) unless otherwise noted. DESCRIPTION This rectangular LED lamp provides a lighted surface area of 2 X 5 mm. The high efficiency red and yellow solid state lamps contain a GaAsP on GaP light emitting diode. The green lamps utilize a GaP light emitting diode. The blue lamps have a GaN/SiC chip. FEATURES • General purpose indicator • Selected minimum intensities • Color diffused lens • Standard 100 mil. lead spacing • Long life solid-state reliability © 2004 Fairchild Semiconductor Corporation Page 1 of 4 3/24/04 SOLID STATE LED LAMP RECTANGULAR 2 X 5 mm LED LAMPS MV52123 AlGaAs Red MV57123 HER MV53123 Yellow MV5B123 Blue MV54123 Green ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise specified) BLUE MV5B123 HER MV57123 GREEN MV54123 YELLOW MV53123 AlGaAs RED MV52123 Units Continuous Forward Current - IF 30 30 30 25 30 mA Peak Forward Current - IF (f = 1.0 KHz, Duty Factor = 1/10) 100 150 150 150 150 mA Reverse Voltage - VR (IR = 10 µA) 10 5 5 5 5 V Power Dissipation - PD 115 100 100 100 100 mW Parameter Operating Temperature - TOPR -40 to +100 °C Storage Temperature - TSTG -40 to +100 °C Lead Soldering Time - TSOL 260 for 5 sec °C ELECTRICAL / OPTICAL CHARACTERISTICS (TA =25°C) MV5B123 BLUE MV57123 HER MV54123 GREEN MV5B123 YELLOW MV5B123 AlGaAs RED Minimum 2.0 1.0 1.0 1.0 1.5 Typical 6.0 4.0 4.0 4.0 5.0 Maximum 4.5 3.0 3.0 3.0 2.4 Typical 3.8 2.0 2.2 2.1 1.7 Part Number Condition Luminous Intensity (mcd) IF = 20mA Forward Voltage (V) IF = 20mA Peak Wavelength (nm) 430 635 565 585 660 IF = 20mA Spectral Line Half Width (nm) 65 35 30 45 40 IF = 20mA Viewing Angle (°) 100 100 100 100 100 IF = 20mA © 2004 Fairchild Semiconductor Corporation Page 2 of 4 3/24/04 SOLID STATE LED LAMP RECTANGULAR 2 X 5 mm LED LAMPS MV52123 AlGaAs Red MV57123 HER MV53123 Yellow MV5B123 Blue MV54123 Green TYPICAL PERFORMANCE CURVES Fig. 2 Relative Luminous Intensity vs. DC Forward Current Fig. 1 Forward Current vs. Forward Voltage 2.5 90 IF - FORWARD CURRENT (mA) RELATIVE LUMNOUS INTENSITY (NORMALIZED AT 20 mA) AlGaAs RED 80 70 HER 60 50 YELLOW 40 30 20 GREEN 10 BLUE HER YELLOW GREEN 2.0 1.5 BLUE 1.0 0.5 AlGaAs RED 0.0 0 1.0 2.0 3.0 4.0 5.0 0 Fig. 3a Relative Intensity vs. Peak Wavelength 10 15 20 25 30 Fig. 4 Current Derating Curve 50 GREEN IF - FORWARD CURRENT (mA) 1.0 RELATIVE INTENSITY 5 IF - DC FORWARD CURRENT (mA) VF - FORWARD VOLTAGE (V) AlGaAs RED YELLOW 0.5 HER 40 HER, GREEN, AlGaAs RED, BLUE 30 YELLOW 20 10 0 0 500 550 600 650 700 0 750 20 40 60 85 100 TA - AMBIENT TEMPERATURE (˚C) WAVELENGTH (nm) Fig. 3b Relative Intensity vs. Peak Wavelength 1.0 RELATIVE INTENSITY BLUE 0.5 0 330 380 430 480 530 580 630 680 WAVELENGTH (nm) © 2004 Fairchild Semiconductor Corporation Page 3 of 4 3/24/04 SOLID STATE LED LAMP RECTANGULAR 2 X 5 mm LED LAMPS MV52123 AlGaAs Red MV57123 HER MV53123 Yellow MV5B123 Blue MV54123 Green DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. © 2004 Fairchild Semiconductor Corporation 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Page 4 of 4 3/24/04