SUPER BRIGHT T-1 3/4 (5 mm) LED LAMP - Water Clear PACKAGE DIMENSIONS 0.200 (5.08) 0.180 (4.57) SUPER RED MV8031 MV8032 MV8033 MV803X CL 0.040 (1.02) 0.350 (8.89) 0.330 (8.38) FEATURES • Popular T-1 3/4 package • Super high brightness suitable for outdoor applications 1.00 (25.4) MIN • Solid state reliability • Water clear optics • Standard 100 mil. lead spacing 0.050 (1.27) 0.100 (2.54) 0.050 (1.27) REF. 0.100 (2.54) REF. Ø 0.230 (5.84) 0.023 (0.58) 0.017 (0.43) SQ. TYP. (2X) FLAT DENOTES CATHODE NOTES: DESCRIPTION 1. Dimensions for all drawings are in inches (mm). 2. Lead spacing is measured where the leads emerge from the package. 3. Protruded resin under the flange is 1.5 mm (0.059") max. This T-1 3/4 super bright LED has a moderate viewing angle of 30° for concentrated light output. The MV803X series is made with an AllnGaP LED that emits red light at 640 nm. It is encapsulated in a water clear epoxy lens package. ABSOLUTE MAXIMUM RATINGS Parameter (TA = 25°C unless otherwise specified) Symbol Rating Unit Operating Temperature TOPR -40 to +100 °C Storage Temperature TSTG -40 to +100 °C Lead Soldering Time TSOL 260 for 5 sec °C IF 30 mA IF 160 mA Reverse Voltage VR 5 V Power Dissipation PD 85 mW Continuous Forward Current Peak Forward Current (f = 1.0 KHz, Duty Factor = 1/10) 1 of 4 1/6/00 300021A SUPER BRIGHT T-1 3/4 (5 mm) LED LAMP - Water Clear SUPER RED MV8031 MV8032 MV8033 ELECTRICAL / OPTICAL CHARACTERISTICS Part Number MV803X (TA =25°C) MV8031 MV8032 MV8033 Condition Luminous Intensity (mcd) IF = 20mA Minimum 400 630 1000 Typical 600 940 1500 2.8 2.8 2.8 Forward Voltage (V) IF = 20mA Maximum Typical Peak Wavelength (nm) 2.1 2.1 2.1 640 640 640 IF = 20mA Spectral Line Half Width (nm) 20 20 20 IF = 20mA Viewing Angle (°) 30 30 30 IF = 20mA TYPICAL PERFORMANCE CURVES 100 2.5 RELATIVE LUMNOUS INTENSITY (NORMALIZED AT 20 mA) IF - FORWARD CURRENT (mA) 90 80 70 60 50 40 30 20 2.0 1.5 1.0 0.5 10 0.0 0 1.0 1.5 2.0 2.5 3.0 VF - FORWARD VOLTAGE (V) Fig. 1 Forward Current vs. Forward Voltage 2 of 4 0 10 20 30 40 50 IF - DC FORWARD CURRENT (mA) Fig. 2 Relative Luminous Intensity vs. DC Forward Current 1/6/00 300021A SUPER BRIGHT T-1 3/4 (5 mm) LED LAMP - Water Clear SUPER RED MV8031 MV8032 MV8033 MV803X RELATIVE INTENSITY 1.0 -20˚ -10˚ 0˚ 10˚ 20˚ -30˚ 30˚ -40˚ 40˚ -50˚ 0.5 50˚ -60˚ 60˚ -70˚ 70˚ -80˚ -90˚ 100 0 550 600 650 80˚ 700 80 60 40 20 0 20 40 60 80 90˚ 100 WAVELENGTH - nm REL. LUMINOUS INTENSITY (%) Fig. 3 Relative Intensity vs Peak Wavelength Fig. 4 Radiation Diagram 35 IF - FORWARD CURRENT (mA) 30 25 20 15 10 5 0 0 20 40 60 80 100 TA - AMBIENT TEMPERATURE (˚C) Fig. 5 Current Derating Curve 3 of 4 1/6/00 300021A SUPER BRIGHT T-1 3/4 (5 mm) LED LAMP - Water Clear DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. www.fairchildsemi.com 4 of 4 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. © 2000 Fairchild Semiconductor Corporation 1/6/00 300021A